GE/863/EWS-T-20 OF 2024-25

Amount

S&F 15mm bore Galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr In Charge..

S&F bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge.

S&F 15mm dia stop valves , fancy type chromium plated, screwed down, screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed by Engr In Charge.

S&F highly BEE five star rated energy efficient water heater storage type, electric supplied and installed complete incl all accessories such as safety valve, thermostat, NRV, PVC connections pipe, etc. of capacity 25 Litres, complete all as specified and directed By Engr-in-charge.

Cutting of Existing water supply main any size upto 25 mm for taking branch connection for taking branch connection of size 15 mm including insertion of Tee unequal all as required at site or directed by Engr-in-charge. Note:- Each cut shall be measured and paid separately.

S&F single pole and neutral enclosure with a two pin plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply, laying and drawing wiring circuit / submain and including 20 mm dia surface PVC rigid casing caping or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6 sqmm (as earth wire) of stranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including connection all as specified and directed. (From AC Box to DB)

M & L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25metres deep below normal ground level) with top edge of the plate not less than 1.5meter below normal ground level ,connected to and including using galvanized iron wire of 4.0 mm thick as earthling lead by means of bolts nuts, cheek nuts and washers of galvanized iron or steel .earth plate surrounded by alternate layers packed with char coal dust and common salt ,15cm thick and 15cm wide all around bottom and top and watering pipe 20mm bore of GI light grade with funnel, wire mesh and 40mm dia GI protection pipe medium grade all as shown in electrical plate no-3 of SSR part-I and connected to earthling test point, and including testing on completion all as specified location and as directed by Engineer-in -charge. Note: 1. Suitable quantity of charcoal, common salt, funnel, GI pipe required for watering, pit & CI pit cover etc is deemed to be included in quoted rate and lead wire used beyond 7.5m from pit cover will be measured separately. 2.On testing after completion if the desired resistance is not obtained the earthing shall be re-done at no extra cost.

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr in depth in any type of soil for laying pipes, etc all as specified and directed by Engineer-in-Charge.

Retuming, filling in incl spreading, levelling watering and well ramming C in layer n exc 25cm in soil each layer complete all as specified and directed by Engineer-in-Charge.

Removing excavated surplus material to a distance n exc 50m and depositing where directed at level n. exc 1.5m above the starting point in any type of soil complete all as specified and directed by Engineer - in-Charge.

Supply and laying and testing 3-layer PP-R Polypropylene random copolymer) concealed pipes of 40 mm dia (outer dia of pipe) SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.:- (Note Excavation and earth work shall be measured and paid separately under Respective items.)

All as per Srl. Item no. 12 here-in-before but of 25 mm dia (outer dia of pipe), complete all as specified and directed.

M&L for providing aluminium cladding over insulation of PPR pipe of Size 25mm Dia with aluminium sheet having thickness 0.2mm complete all as specified and directed.

Supply & fixing lagging to pipes uesd in water supply or plumbing all round with lagging closed cell elastomeric nitrile rubber insulation with 25mm thick pipe section for suitable density suitable for PPR pipe for size 25mm dia complete all as specified and directed.

Supply and fixing PP-R Gate valves (brass insert) suitable for pipe of outer dia 40 mm complete all as specified and directed.

Supply and fixing PP-R Gate valves (brass insert) suitable for pipe of outer dia 25 mm complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.,complete all as specified and directed.

M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc. all as specified for one light point/ fan Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 19 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

All as per Srl item No 19 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with other switches with cable 2.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge.

Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge.

Supply and fixing switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge.

Supply and fixing socket outlet 3 pin 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge.

M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge.

S & F LED light fitting 20W, 220 volt AC, having colour temperature daylight (6500K), Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 4 way 240 volt complete all as specified and directed by Engineer-in-Charge .

Supply and fixing in replacement of MCB SPN 32 amps 230V complete all as specified and direct by Engineer-in-Charge .

S&F in replacement of MCB SP 6 Amp to 32 Amp, 240 Volts, 10 KA, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm complete

M & L in replacement for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25metres deep below normal ground level) with top edge of the plate not less than 1.5meter below normal ground level ,connected to and including using galvanized iron wire of 4.0 mm thick as earthling lead by means of bolts nuts, cheek nuts and washers of galvanized iron or steel .earth plate surrounded by alternate layers packed with char coal dust and common salt ,15cm thick and 15cm wide all around bottom and top and watering pipe 20mm bore of GI light grade with funnel, wire mesh and 40mm dia GI protection pipe medium grade all as shown in electrical plate no-3 of SSR part-I and connected to earthling test point, and including testing on completion all as specified location and as directed by Engineer-in -charge. Note: 1. Suitable quantity of charcoal, common salt, funnel, GI pipe required for watering, pit & CI pit cover etc is deemed to be included in quoted rate and lead wire used beyond 7.5m from pit cover will be measured separately. 2.On testing after completion if the desired resistance is not obtained the earthing shall be re-done at no extra cost.

S&F in replacement for PVC exhaust fan, Single Phase 250mm sweep, with louvre complete all as per specified and directed by Engineer-in-Charge.

Supply and fix exhaust fan steel body AC ,single phase,230V of size 300 mm sweep with blades, 1400 rpm, including frame and louvers, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge

M&L for screed bed or bedding layer of mortar 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite, complete all as specified and directed by Engr-in-charge

M & L for Virified Ceramic tiles Light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engr-in-charge

Dismantling of stone slab and tiles of any description or thikness in floors ,apron etc., complete all as specified and as directed.

M&L for machine cut kota stone slab flooring of size 550mmx550mm and 20-25mm thick over and incl cement screed bed 20 mm thick cement plaster 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-charge

M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick including screed bed 15mm thick in (CM 1:6) , with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, complete all as specified and directed by Engr-in-charge.

M&L for providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed by Engr-in-charge

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings, complete all as specified and directed by Engr-in-charge

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge

All as Srl Item No. 45 here-in-before, but except sheeting, complete all as specified and directed by Engr-in-charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets, complete all as specified and directed by Engr-in-charge.

Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified and directed by Engr-in-charge.

M&L 2nd class hard wood in scantling timber framed work fixed clean sawn directed complete all as specified and directed by Engr-in-charge.

M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in ceiling etc complete all as specified and as directed.

M&L for 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work, complete, all as specified and as directed.

S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq. cm, complete all as specified and directed by Engr-in-charge

Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed.

S & F 35mm second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

Preparation of new or previously untreated wood and wood based surfacrs of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink Primer, complete all as specified and directed by Engr-in-charge

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

S&F 300mm long aluminium anodised sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple, complete all as specified and directed by Engr-in-charge

S&F MS butt hinges cold rolled meium weight of size 100mm etc complete all as specified & directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed

S&F in repairs 300mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate, complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 Type C-1 using 20mm crushed stone aggregate as in plinth protection and finished even and smooth without using extra cement including filling the joints with bitumastic filling, with 85/25 bitumen and coarse sand mixture. 1:3 by weight, as in plinth protection complete all as specified & directed.

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed.

Schedule of Credit

R B TRADERS (BID ID -3071810)

H M INFOTECH (BID ID -3072281)

M/S SHIV NATH ENTERPRISES (BID ID -3071989)

M/S Shamsher Negi Dewa (BID ID -3072116)

M/S Gulab Singh (BID ID -3072455)

M/S Gopal Singh (BID ID -3072385)

PRITPAL SINGH (BID ID -3071770)

M/S PAWAN KUMAR NEGI GOVT. CONTRACTOR (BID ID -3072124)