PR from Km 95.00 to Km 101.00 on NH51 New NH217 in the state of Meghalaya. Job No.TA217MG2021 22 160

Amount

5.2: Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor @ 0.20 kg per sqm on the prepared bituminous granular surface cleaned with mechanical broom.This includes loading unloading, haulage, forest royalty and all aplicable taxes complete as directed.

5.6: Dense Graded Bituminous Macadam (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects.). This includes loading unloading, haulage, forest royalty and all aplicable taxes complete as directed.

5.8: Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects). This includes loading unloading, haulage, forest royalty and all aplicable taxes complete as directed.

8.13: Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.). This includes loading unloading, haulage, forest royalty and all aplicable taxes complete as directed.

8.35: Road Markers/Road Stud with Lense Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973). This includes loading unloading, haulage, forest royalty and all aplicable taxes complete as directed.

8.4: Retro- reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing). This includes loading unloading, haulage, forest royalty and all aplicable taxes complete as directed.

(ii) 60cm equilateral triangle

8.5: Direction and Place Identification signs upto 0.9 sqm size board. (Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing). This includes loading unloading, haulage, forest royalty and all aplicable taxes complete as directed.

1. HAZARD MARKER

2. CHEVRON SIGN

3. PLACE IDENTIFICATION

4. DIRECTION IDENTIFICATION

5. HOSPITAL AREA

6. School Ahead

7. NO PARKING

8. NO DOUBLE PARKING

MIDAS CONSTRUCTIONS

P K Company