ADDITION / ALTERATION AND SPECIAL REPAIRS TO BLDG NO. P-01 (ADMIN COMPLEX) AT HQ 31 WEU THANE

Amount

B/R WORK Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and directed. Note: The place of disposal shall be find out by the contractor.

M & L for carefully chipping, removing carefully loose/damaged concrete including plastering (total thickness upto 60mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush and removing debris out side MD land complete all as specified and directed. Note : i) Hard concrete shall not be removed by force. ii) Item No.1.00 shall not be applicable for the locations/areas where item No.2.00 is applicable. iii) The place of disposal shall be find out by the contractor.

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan n.exceeding 6m mean radius built in CM 1:4 complete all as specified.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified . Note: The place of disposal shall be find out by the contractor.

M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, complete all as specified and directed. Note :- Mode of measurement : Superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.

M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed. Note :- Mode of measurement : superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.

M&L for providing TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in various structural RCC elements like columns, beams, Slabs etc. including cutting, bending, fixing of bars with welding/ tying as required at site with & including binding wires etc. and all relevant works like anchoring of the bars in the existing RCC Members complete all as specified and directed.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit, upto 20mm thickness while the bonding agent is still tacking, including levelling, profiling etc, complete all as specified and directed.

M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit while the bonding agent is still tacking, exceeding 20mm thickness and not exceeding 40mm thickness in two layers, each layer not exceeding 20mm, including levelling, profiling etc, complete all as specified and directed.

M&L for casting & repairing of excessively damaged distressed RCC members (exceeding 40mm in thickness) with prebatched, prepacked, single component ready to use microconcrete from Fosroc (Renderoc RG) or equivalent of Dr. Fixit as approved by GE, at any level/ height and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications and all other relevant works, complete all as specified and directed. Note : Reinforcement shall be measured and paid separately.

M&L for 10 mm thick polymer modified ready mix cement based plaster on the wall surfaces including finishing surfaces even and smooth without using extra cement complete all as specified and directed Make: Easy Plast from M/s wall plast or chemplast or readyplast from Ultratech” Note: (i) The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with ready mix plaster and nothing extra shall be payable on this account. (ii) This item shall be operated only for the locations where the thickness of existing adjoining plaster is to be matched

M&L for 5 mm thick polymer modified ready mix cement based plaster on surfaces of ceiling including finishing the surface even & smooth without using extra cement complete all as specified and as directed. Make : Easy plast from M/s wall plast or chemplast or Readiplast from ultratech. Note: The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account.

M&L for 12 mm thick polymer modified ready mix cement based plaster on the wall surfaces mixed with liquid water proofing compound in the proportion as per manufacturer’s instructions including finishing the surfaces even and smooth without using extra cement complete all as specified and directed, Make : Easy plast from M/s wall plast or chemplast or Readiplast from ultratech. Notes : (i) The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account. (ii) WPC shall be paid for separately.

Supply only liquid water proofing compound.

M&L for prepration of surfaces by cutting V groove all along the crack and seoration gap , removing , all loose materials wash down by potable water applying bond of epoxy bonding agent & cement in ratio 1:1 for bonding old and new concrete filled the gap by polymer modified mortar in CM 1:3 including polymer latex additives complete all as specified and directed.

M&L for prepration of new plastered surfaces of wall and applying 2 mm thick plaster of paris putty even and smooth and applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved shade and colour complete all as specified.

M&L for prepration of new plastered surfaces of ceiling and applying 2 mm thick plaster of paris putty even and smooth and applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved shade and colour complete all as specified.

M&L for complete removal of existing treatment of old plastered surface of ceiling and applying 2 mm thick plaster of paris putty even and smooth and applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved shade and colour complete all as specified.

M&L for complete removal of existing treatment of old plastered surface of wall and applying 2 mm thick plaster of paris putty even and smooth and applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved shade and colour complete all as specified.

M&L for prepration of new plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of approved shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over complete all as per manufacturers instructions and all as specified .

M & L for complete removal of existing treatment including washing, rubbing down and stopping of distempered and painted wall surfaces, filling holes and cracks with filling putty on wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as per manufacturers instructions and all as specified .

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

-Ditto- as per item No 24.00 above but n.exc 10cm girth.

M & L for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified .

M & L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified .

M & L for brick work with sub class 'B' bricks in one brick thick honey comb walling built in CM 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish off the premises. Note: The place of disposal shall be find out by the contractor.

M & L for dark shade double charge ultra charge vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.0 sqm in flooring set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified.

M & L for dark shade double charge ultra charge vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.0 sqm as in skirting, dado , set and jointed in neat cement paste and pointed in coloured cement to match the shade including backing coat 15 mm thick on fair faces of brick or concrete surface in cement mortar (1:4) complete all as specified.

M&L for non skid coloured ceramic tiles7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in flooring set, bedded and jointed in neat cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of tiles laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) complete all as specified

M&L for Glazed ceramic colour tiles 350x 250x 7 mm/ 450X 350X 7mm thick as in skirting, dado, set and jointed in neat cement paste and pointed in coloured cement to match the shade including backing coat 15 mm thick on fair faces of brick or concrete surface in cement mortar (1:4) complete all as specified.

M&L for coloured 300x600x7 to 8mm thick digital ceramic tiles on vertical surfaces such as in skirting, dado, set and jointed in neat cement paste and pointed in coloured cement to match the shade including backing coat 10 mm thick on fair faces of brick or concrete surface in cement mortar (1:4) complete all as specified.

M&L for 20mm thick machine cut machine polished granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms (single piece) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including screed bed or bedding layer of cement mortar 15 mm in 1:4 including moulding/rounding to edges of the slab complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick as in cills, jambs etc,laid over and including 15mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including moulding/rounding to edges of the slab complete all as specified and directed.

M&L 20 to 25 mm thick machine cut kota stone slab in flooring of any size laid, jointed and pointed in white cement slurry mixed with pigment to match with shade of stone laid over and including screed bed or bedding layer of 15mm thick in cm (1:4) including rubbing and polishing complete all as specified and directed.

M&L for Durastone Heavy Duty vitrified tiles (300x 300) x 10-12 mm thick in floor set and jointed with neat cement slurry and pointed in coloured cement to match over screed bed or bedding layer of morar 20 mm in cement mortar 1:6 complete all as specified.

M&L for providing 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement complete all as specified .

M&L for special treatment of sunken portion of WCs and Bath room as per following stages: Stage 1 :- Demolition of WC including lime concrete and cement concrete coba and preparing the surfaces of existing sunken portion of WCs or bath with wire brush to remove all loose dirt, oil, grease etc and clean with water. Stage 2:- Providing 10mm thick plaster in CM 1:4 mixed with chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd and allow to dry for 8 hours under touch dry condition Stage 4:- Applying two coats of water proofing decorative elastomeric coating system of Dr Fixit Raincoat with DFT 100 Micron or shalicry 215 of STP(The surface after painting one coat shall be allowed to dry for 6 hours before next coat) all as per manufacturers instructions. Stage 5:-Providing rendering 10mm thick in CM 1:4 mixed with Dr Fixit Pidicrete URP or plaster seal of STP Ltd. Stage 6. All CI joints shall filled with mixture of cement and fine sand and plaster seal of STP Ltd or Dr Fixit pidicrete URP. Stage 7:- Making holes in wall and fixing 600mm long 20mm dia GI spout for draining the surplus water if any and seal the surrounding as per stage 6 above.

S&F GI tubing medium grade with all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc fixed to walls and ceilings or laid in floors with suitable size GI clamps including taking down old GI tubing with fittings complete all as specified.

15mm bore.

20mm bore.

40mm bore.

S&F cast iron Nahani trap 100mm dia out let including grating connecting jointing to waste pipe with lead jointing including taking out existing unserviceable trap by hacking out concrete joints and making good disturbed surfaces as per existing complete all as specified .

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm.

S&F towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (Min wt 190 gms).

S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pully or lever complete all as specified and as directed .

S&F in repairs 15 mm dia bib taps,fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specfied and dIrecetd.

S&F in repairs 15 mm dia bib taps two way fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule complete all as specfied and dIrecetd.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs 15 mm bore pillar taps fancy type, cast copper alloy, with capstan heads chromium plated screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly nuts screwed for iron pipe or brass ferrule and fixed complete in all respect as specified.

S&F in repairs 15 mm bore stop valve cast copper alloy, chromium plated, fancy type with long shank screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or union complete all as specified.

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

S&F vitreous china, table top wash hand basin oval shape of size 420mm x 420mm x135 mm fixed on granite top including 32 mm dia brass CP, waste fittings, plugs with rings with long screwed shanks and fly nuts, flange end fixed to wash basin and making all connections complete all as specified. Make- Cat No : ARS-WHT-0538 of JAQUAR Note: Granite slab, RCC platform, brick wall support etc shall be measured and paid separately)

S & F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame/aluminium frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Supply only stainless steel wire cloth 0.36mm mm nominal dial of wire and average width or aperature 1.40mm for fixing to wooden door/ window shutters in any position with new beads/ steel section as required for securing including dismantling of old jalli and painting to match with existing complete all as specified and as directed.

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane fixing to wooden door/aluminium window shutters in any position with new beads/ steel section as required for securing including dismantling of old jalli and painting to match with existing complete all as specified and as directed.

S&F 4 mm thick figured glass, pin head type, glazing with oil putty area not exceeding 0.50 Square Metre in each pane complete all as specified .

S& F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S& F in repairs mild steel, chromium plated brackets for item 59.00 above complete all as specified and directed.

M&L for PCC (1:2:4 ) type B-1 (using 20 mm graded stone aggregate) as in levelling course over RCC roof surface to achieve required slope including rounded or chamfered edges mixed with water proofing compound @ 3% by weight of cement and finishing surface even and smooth without using extra cement complete all as specified NOTE :- WPC shall be measured and paid separately as supply only.

M&L for rendering 10mm thick in cement mortar (1:3) and finished even & smooth without using extra cement mixed with WPC @ 2% by weight of cement complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.

M & L for taking down existing APP membrane and preparing RCC roof surface with wire brush to remove all foreign matters and washing with water to remove loose particle and applying APP based polymer membrane complete all as specified with the following specifications :- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application method with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%. (d) Over the membrane provide a finishing with solar reflective bitumen aluminium paint @ 0.10 Kg/Sqm as prescibed by manufacturer.

M&L for salt glazed stoneware drain pipe, grade 'A', laid in trenches and jointed as specified, internal diameter of pipe 150 mm demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete), set in cement concrete and removing debries outside MD land.

S&F 150 mm bore Bends and taper bends suitable for salt glazed stoneware drain pipe complete all as specified .

S&F 150 mm bore single Y junction suitable for salt glazed stoneware drain pipe complete all as specified .

S&F PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joint fixed to wall with suitable size PVC clamps by maintaining 30 mm clear gap between finished wall surface and pipe including dismantling existing pipes of any description and in any position including all fittings complete all as specified .

S&F 110 mm bore PVC(SWR) bend any radius, diminishing pieces or tapers (Large bore will be measured) with rubber ring joints complete all as specified .

S &F PVC (SWR) junction, single (single T) 110 mm bore equal or unequal with rubber ring joints complete all as specified .

S&F PVC (SWR) rain water pipe 150mm bore single socketed in any length with rubber ring joint fixed to wall with suitable size PVC clamps by maintaining 30 mm clear gap between finished wall surface and pipe including dismantling existing pipes of any description and in any position including all fittings complete all as specified .

S&F 150 mm bore PVC (SWR) bend any radius, diminishing pieces or tapers (Large bore will be measured) with rubber ring joints complete all as specified .

S &F PVC (SWR) junction, single (single T) 150 mm bore equal or unequal with rubber ring joints complete all as specified .

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or S trap and provision of lime concrete bedding complete all as specified.

S&F in repairs vitreous china wash down water closet pan (Padestal pattern) coloured, including matching plastic sheet cover, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodized hinging device icluding making good disturbed portion of floor in cement concrete 1:2:4 type B-0 complete all as specified and directed.

M & L for removing plant/growth alongwith soil/vent/rain water pipe including removing complete roots of plant and treated with HCL and making good disturbed surfaces with cement mortar 1:4 at any storey level including safety arrangement and scaffolding complete all as specified and directed.

M&L for 18/19 mm thick marine plywood bonded with undiluted Phenol Formal dehyde resin, Boiled Water Proof, Specific gravity 0.80 (minimum), moisture content 8-12%, water absorption <5%, provided with and including 1mm thick plastic laminated sheet on both sides of plywood (plastic laminated sheet shall be with decorative choice lamination on one side and other side balancing white lamination) as in kitchen cabinets, cup board, shelves etc, Fixed with screws to frame work, complete all as specified and directed, Note: Glass panels shall be measured and paid separatly as "supply only".

S&F stainless steel electro polish of grade 202 as in kitchen trolley for modular kitchen consisting of cutlery cup / soucer, thali basket, drawers, plain basket, bottle pullout basket etc, complete all as specified and directed. NOTE: The design and specifications of the above item shall be got approved by the contractor from the GE before procurement

S&F D-handle of size 96mm long of stainless steel with matt or glossy finish for modular kitchen shutters complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) exc.1.5 Sqm but not exc 4 Sqm each complete all as specified .

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & manufacturers instructions.

S&F 30 mm thick factory made solid panel PVC door shutter (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & manufacturers instructions.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant as per specifications drawing as directed by the Engineer - in -charge . Material test certificate and authentication should be compulsory provided by the manufacturing company.and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be measured and paid separately.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel complete all as specified.

S&F aluminum anodised barrel tower bolts of extruded section of size 150 mm length complete all as specified.

S&F 150 mm extruded aluminum alloy handles, fabricated type anodised complete all as specified.

S&F aluminum anodised sliding door bolts with hasp and staple ( bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, length of bolts 300 mm.

M&L for mild steel bands, straps , supports or stays for rain water, ventilating pipes including bolts, clamps, hold fasts etc and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified..

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in bed blocks for holding hold fasts including necessary form work complete all as specified.

M&L for preparing new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S & F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

Taking down carefully aluminium sliding window shutters from the frames or chowkhat and supply and fix new locking arrangement and refixing the shutter in existing position complete all as specified .

Taking down carefully aluminium sliding window shutter and re-fixing the shutter in existing position after replacement of broken glass/stainless steel wire mesh with rubber gasket, area of window exc 1.20 sqm but not exc 4 Sqm each including necessary scaffolding etc complete all as specified . Note: Glass & stainless steel wire mesh will be measured and paid separately.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket . Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete as per directions of Engineer-in-Charge.

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodizing coating of grade AC 15) of approved design/pattern and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete as per direction of Engineer-in- charge.

Supply and fix hot dipped GI imposed grid with 24mm wide T section exposed flanges, powder coated frame work comprising of main runner made from 0.33 mm thick gs sheet of size 24mmx32mmx3000 mm @1200 mm C/C GI wire 4mm dia fixed by rawl plug, level adjusters and screws etc flush fitting of 1200mm long cross tee interlocked between main runners @ 600mm c/c to form 1200mmx600mm modules cross tee longer than 600 mm to be supported independently 600mmx600mm modules shall be formed by fitting 600mm long cross tee centrally between 1200mm cross tee ,perimeter wall angle shall be GS of size 19mmx19mm and 0.45 mm thick 300mm long including 600mmx600mmx8 to 10mm thick Armstrong gypsum reinforced board complete all as specified and directed.

Supply and fixing suspended false ceiling using (ACP) Aluminium Composite Panel sheet 3mm thick and Aluminium rectangular pipe for grid system fixed to concrete /plaster surface with stainless steel screws including requisite size aluminium fillets complete all as specified and directed.

M&L for stainless steel buffed pipe of grade 316-L (Fabricated in any type, design as approved by the GE) as in Staircase railing complete all as specified .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified .

S&F rotational moulded polyethylene water storage tank 2000 Ltr capacity, (cylindrical vertical with closed top) including all connections for inlet, outlet, overflow and washout etc hoisted and fixed in position all as specified in SSR Part-I including approved PVC cover with locking arrangement including dismantling existing PVC water tank any type and pattern and in any position complete all as specified.

S&F rotational moulded polyethylene water storage tank 1000 Ltr capacity, (cylindrical vertical with closed top) including all connections for inlet, outlet, overflow and washout etc hoisted and fixed in position all as specified in SSR Part-I including approved PVC cover with locking arrangement including dismantling existing PVC water tank any type and pattern and in any position complete all as specified.

S & F 20 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified .

S & F 25mm bore gun metal, globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as specified.

S F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F toughned glass 10 mm thick as in hinged doors , partitions autometic doors and similar work incl cutting to shape , drilling holes requred including adecute locking system fixed at bottom of door panel complete all as directed.

S&F toughned glass 12 mm thick as in hinged doors , partitions autometic doors and similar work including cutting to shape , drilling holes requred including adecute locking system fixed at bottom of door panel.

Supply only 30 cm long ornemental type stainless steel door handles fixed to 10/12 mm toughened glass door pattern and design as approved by GE.

M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam,tee, angle, channel or flat sections)incl distance pieces, cleats, etc conforming to grade Fe-410W-(Gde E-250 Quality A).

S & F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile stength of 550Mpa as in roof coverings/cladding to wall, fixed with self tapping screws including dismantling existing plain/corrugated steel sheeting, any gauge or thicknessas complete all as specified.

Supply & fix in repair steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp ,spring and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type thickness of laths 1.25 mm complete all as specified and directed.

S & F Ball bearing suitable for rolling shutters complete all as specified and directed.

M&L for PVC tiles/ sheets 1.5 mm thk, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified

M&L for PVC tiles/ sheets 1.5 mm thk, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in vertical surfaces complete all as specified.

M&L for mild steel structural framed work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.

M&L for mild steel framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal of debris out of MD land. Note: The place of disposal shall be find out by the contractor.

M&L for 100 mm thick PCC 1:2:4 type B1(using 20 mm graded stone aggregate) in floors, surfaces finished even & smooth without using extra cement complete all as specified.

M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is nor provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete

M&L for post construction anti-termite treatment to wood work in contact with masonry such as frame of doors, windows, cupboard, ward robes, ventilators, wooden loft, switch board and wooden structures etc by drilling holes of 6mm dia with a downward slant at 45 degree to the core of wood work @ 150 mm C/C and injecting chemical chlorophyriphos 1% concentration with kerosene based solution till refusal and sealing the hole with white cement mixed with coloured pigment to match the surface complete all as specified

S&F floor door stopper of brass body and tongue with hard drawn steel spring overall length of cover plate 140mm complete all as specified and directed.

S&F door closer (Aluminium extended section body) hydraulically regulated designation No. 3 Universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg complete all as specified and directed.

E/M WORKS Taking down carefully copper / aluminium point wiring (light, fan socket or power) through steel / PVC conduit / casing caping including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, buzzer, bell, switch sockets, etc removing and making good to the disturbed surfaces of walls/ceiling etc, with its original specification complete all as specified and directed.

M & L for point wiring with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLSH copper conductor cable (using colour code as per IS), 1100 volts grade drawn through and including suitable size surface PVC casing caping (ISI marked) with all accessories and terminated in and including 2 mm thick pressed steel terminal boxes concealed in wall covered with laminated sheet top cover 3 mm thick for mounting switches / sockets / fan regulators including 1.5 sqmm size PVC insulated, unsheathed, multistranded FRLSH copper conductor cable for continuous earth conductor (using green colour) and connecting to earth dolly for One light/ fan / bell point controlled by one switch 5 Amp, SP, one way 240 volts.

-Ditto- as per item No. 127.00 above but for one 5A 2pin/3pin socket outlet multipurpose on the same board with other switches.

-Ditto- as per item No. 127.00 above but for one 5A 2pin/3pin switch socket out let multipurpose on independent Board.

-Ditto- as per item No. 127.00 above but but point wiring complete with 2.5 Sqmm PVC insulated and unsheathed multistranded FRLSH copper conductor cable for 3 pin 15 Amps socket multipurpose on independent board

S&F in repairs modular switch 6A one way SP 1 module conforming to IS: 3854-1997 with finger proof terminal complete all as specified and directed.

S&F in repairs modular type 2/3 pin combined shuttered type 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F in repairs modular type 2/3 pin combined shuttered type16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.

S&F in repairs modular switch 16 A one way SP 1 module confirming to IS: 3854-1997 with finguer proof terminal complete all as specified and directed.

S&F in repairs modular type 120W, 5 step fan regulator of 2 module conformng to IS: 11037-1984 complete all as specified and directed.

Supply & Fix in repairs Modular Bell push flush type 6 Amp, 1 module, 230 Volts complete all as specified and directed.

Supply and fix in repairs bell ding dong AC 230 V single pole. complete all as specified and directed.

S & F in repairs Modular Blank plate 1 module suitable for Modular switch boards all as specified and as directed

S & F Modular cover plate 12 modules

S & F Modular cover plate 8 modules

S & F Modular cover plate 6 modules

S & F Modular cover plate 4 modules

S & F Modular cover plate 3 modules

S & F Modular cover plate 2 modules

S & F Modular cover plate 1 module

S&F in repairs ceiling rose three terminal, 230 Volts PVC / Polycarbonate body, complete all as specified and directed.

Supply and fix in repairs LED Batten fitting 4 ft long made out of extruded aluminium, operating on 230V, 50Hz AC supply having power consumption of 20 watts, CCT 6500K, THD<10%, luminous efficacy not less than or equal to 100 lm/watt, including microwave sensor for energy efficiency and suitable to reduce light intensity during non-occupancy complete all as specified and directed.

Supply and fix in repairs LED based 2 ft x 2 ft luminous, recessed mounted, made out of white powder coated CRCA housing with flat white high transmission acrylic cover of capacity 36 watt, operating on 230 V, AC supply, 50 Hz, CCT 5700 K, THD<10% Luminous efficacy not less than or equal to 120 lm/watt complete all as specified & directed.

Supply and fix in repairs LED fitting 2 ft long ,made out of engineering plastic with white acrylic cover sleek design & high efficiency suitable for surface mounting on wall, operating on 230 V, 50 Hz, AC supply, of capacity 10 watts, CCT 6500 K, THD < 10%, luminous efficacy not less than or equal to 120 lm/ watt, complete all as specified and directed

Taking down carefully old unserviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.5 mfd - 01 No., PVC canopy - 02 No's and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide zinc chrome primer and refixing in the same position complete all as directed.

Supply & fix Heavy Duty metallic Exhaust fan high speed type of sweep 300 mm, speed 1400 RPM, air delivery 1300CMH, power 70W (approx) comprising of double ball bearing, blades, louvers, mounting anchor fasteners, aluminium louvers made of aluminium sheet of 0.5 mm thickness, provision of three core 1.5 Sqmm PVC insulated copper cable from ceiling rose to fan complete all as specified and directed. Note -: The Contractor shall submit 1 years warranty certificate from OEM of exhaust fan

Supply and fix in repairs white domestic Exhaust fan 250 mm sweep operating on 230 V, 50 Hz, AC supply, compete with high air delivery complete including all fixing arrangement with suitable nuts, bolts & washers and making provision for fixing on wall/ window all as specified and directed. Note -: The Contractor shall submit 1 years warranty certificate from OEM of exhaust fan.

S & F in repairs MCB DB, 12 way, SPN, double door, 240 Volts including cutting chases in wall for concealing enclosure in wall and making good disturbed surfaces as per existing and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.

S & F in repairs MCB DB, 8 way, SPN, double door, 240 Volts including cutting chases in wall for concealing enclosure in wall and making good disturbed surfaces as per existing and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.

S & F in repairs MCB DB, 4 way, TPN, double door, 415 Volts including cutting chases in wall for concealing enclosure in wall and making good disturbed surfaces as per existing and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.

S & F in repairs MCB SPN 20 to 32 Amps, 240 Volts, 50 Hz, 10 KA Breaking capacity 'C' curve complete all as specified and directed.

S & F in repairs MCB SP 5 to 32 Amps, 240 Volts, 50 Hz, 10 KA Breaking capacity 'C' curve complete all as specified and directed.

S & F in repairs MCB TPN 63 Amps, 415 Volts, 50 Hz, 16 KA Breaking capacity 'C' curve complete all as specified and directed.

S&F in repairs single pole and neutral enclosure with a two pin and earth and metal clad plug socket with one single pole MCB 20 Amp 240 Volts including cutting chases in wall for concealing enclosure in wall and making good disturbed surfaces as per existing complete all as specified.

M&L for sub main wiring with two single core 4.0 Sqmm PVC insulated FRLS copper conductor cable 660/1100 volts grade drawn through and including non metalic PVC casing caping including PVC insulated 4 Sqmm single core copper conductor cable as continous earth wire in green colour connected to common earth dolly including taking down existing submain wiring complete all as specified and as directed. Note : Three runs of 4.0 Sqmm cable and one run of PVC casing capping shall be measured and paid as one unit.

M&L for sub main wiring with two single core 6 Sqmm PVC insulated FRLS copper conductor cable 660/1100 volts grade drawn through and including non metalic PVC casing caping with and including PVC insulated 6 Sqmm single core copper conductor cable as continous earth wire in green colour connected to common earth dolly including taking down existing submain wiring complete all as specified and as directed. Note : Three runs of 6 Sqmm cable and one run of PVC casing capping shall be measured and paid as one unit.

M&L in repairs for sub main wiring with two single core 1.5 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 1.5 Sqmm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed. (Make :- PRESFIT/ PRECISION - Casing caping), (Make :- FINOLEX/ KEI/ POLYCAB - PVC Copper wire) Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.

Supply and fixing LED street light fitting 30-35 Watt 230 V AC outdoor type with high pressure die cast aluminium housing along with prismatic polycarbonate optic with IP66 ingress protection having 4 kv in built surge protection with top opening driver cover for easy maintenance, efficacy not less than or equal to 100lm/W, CCT 5700K complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics including MS clamps, bolts, nuts, washers, anchor fasteners etc suitable for fixing security light of Cat No -: ENXT P 35L WH PO PC SD of Bajaj or equivalent from Philips/Jaguar/ Wipro/ CG, complete all as specified and as directed. Note for item No: 147, 148,149 & 163 A warranty certificate of 02 years for LED light fittings alongwith LM-70, LM-80 test certificate from OEM will be provided by the Contractor.

S & F in repairs GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts complete all as specified and as directed.

M & L in repairs for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanised MS strip 32 x 6 mm by means of bolts, nuts, check nuts and washers connected to earthing test point including testing on completion and including excavation and earthwork in any type of soil, PCC earth pit with 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. complete as all specified and as shown in Electrical Plate No.3 of SSR part I.

S&F in repairs aluminium earth strip as roof/down/earth continunity conductors of size 25mm x 4mm with saddles, insulators, screws at any position / location of sheds/ buildings of height up to 5 metre complete all as specified and directed. Note - i) The quoted rate is deemed to inclusive of T & P/scaffolding/staging etc for executing the work in buildings of height up to 5 meter. ii) The rate is deemed to be provision of Procelain insulator, screws, Plugs

Supply & fix in repairs GI cable tray with cover of size 300 mm X 100 mm (Appx 2.0 mm thickness) including spacers, screws, saddles for fixing the trunking in wall/GI sheets of shed complete all as specified and directed.

Supply & fix DLP ducting of cables/ wires including spacers, screws, saddles for fixing the trunking in wall/GI sheets of shed complete all as specified and directed.

Taking down carefully Window and split type AC 1.5/2.0 TR capacity including servicing of outdoor & indoor units which includes cleaning of cooling coils, tightning of loose terminations and refixing the same in existing position and carrying out brazing/ welding and replacement of worn out connected items and testing on completion complete all as specified and directed.

Supply and fix in repairs copper tube of size 1/4" bore including brazing with rubberised insulation and tape suitable for supply pipes for air conditioners complete all as specified and directed.

Supply and fix in repairs copper tube of size 5/8" bore including brazing with rubberised insulation and tape suitable for supply pipes for air conditioners complete all as specified and directed.

Supply and fix in repairs PVC drain pipe of size 5/8" bore of air conditioners complete all as specified and directed.

Supply and fix in repairs 4 core 2.5 sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade ISI marked complete all as specified and directed.

Supply and fix in repairs Heavy duty Water Proof Powder coated bracket for mounting of outdoor unit of air conditoner made out of 2 mm thick high grade steel with suitable fastener, MS nuts, bolts M8 x 45mm, washer, bolt M8 x 30mm nut, bolts & washers etc. complete all as specified and directed. Make :- Companion Sleek, Aircool Sales Corporation or equivalent make as approved by GE

Taking down carefully existing ceiling Diffuser and re-fixing the same after spray painting with two coats of synthetic enamel paint of whie colour after preparation of surfaces complete all as specified and directed. Note : Any changes in AC duct opening after false ceiling work shall be modified and rate quoted shall be inclusive of the same

Supply and Fix in repairs square (600 x 600 mm) type Air Diffuser made out of aluminium sheet 18 gauge with butterfly damper reverts complete all as specified and directed. Note : Any changes in AC duct opening after false ceiling work shall be modified and rate quoted shall be inclusive of the same

Vishal Builders

mp construction co

the bhimani group of companies

Joy builders

MUKESH CONSTRUCTION CO

Star Construction Co.