REPAIR AND MAINT OF EARTHING AND SOLAR HEATING APPLIANCES LIGHTNING PROTECTION AND ELECTRIC ENERGY METERS OF VARIOUS CENTRAL INSTITUTE AND BLDGS UNDER GE SOUTH UDHAMPUR

Amount

Supply and fixing Air terminations Single pointed aluminium rod 12mm dia and 300mm long with necessary fixing arrangements on roof including taking down of old rusted complete all as specified and as directed.

Supply and fixing Air terminations Single pointed copper rod 12mm dia and 300mm long with necessary fixing arrangements on roof including taking down of old rusted complete all as specified and as directed.

Supply and fixing test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25mm, drilled and screwed including 3 nos 8mm dia 25 mm hexogonal head screw including taking down old rusted complete all as specified and as directed.

Supply and fixing rectangular PVC insulators for copper/aluminium/GI strip complete all as specified and as directed.

Supply and fixing solar water heater panel 1000 LPD FPC type (Panel type) servicing, cleaning, brazing, cutting, opening of glass etc with replacement of end caps & rubber cover complete all as specifed and as directed by Engr-in-charge/GE.

Supply and fixing solar water heater panel 500 LPD FPC type (Panel type) servicing, cleaning, brazing, cutting, opening of glass etc with replacement of end caps & rubber cover complete all as specifed and directed by Engr-in-charge/GE.

Supply and fixing solar water heater panel 350 LPD FPC type (Panel type) servicing, cleaning, brazing, cutting, opening of glass etc with replacement of end caps & rubber cover complete all as specifed and directed by Engr-in-charge/GE.

Supply and fixing Heating element capacity 3 KW for Solar water heater 1000 LPD complete all as specified and as directed.

Supply and fixing Heating element capacity 2 KW for Solar water heater 500 LPD/300 LPD complete all as specified and as directed.

Supply and fixing solar flat plate collector complete all as specified and as directed by Engr-in-charge/GE.

Supply and fixing solar water heater tank capacity 350 LPD (Innet tank material - stainless steel 304,inner tank thickness 0.5mm, Insulation thickness 45mm, Insulation material - Polyurethene foam (PUF), end cap thickness 0.4mm & Pipe material - stainless steel 304 & pipe size 3/4") complete all as specified and as directed by Engr-in-charge/GE.

Supply and fixing GI tubing medium grade of 15 mm bore complete all as specified and as directed by Engr-in-charge/GE.

Supply and fixing GI tubing medium grade of 20 mm bore complete all as specified and directed by Engr-in-charge/GE.

Supply and fixing GI tubing medium grade of 25 mm bore complete all as specified and directed by Engr-in-charge/GE.

Bib taps size 20mm , cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass errule and fixed complete all as specified and directed by Engr-in-charge/GE.

Stop valves size 20mm,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge/GE.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe (Minimum weight 20mm-210gms) and fixed complete all as specified and as directed by Engr-in-charge/GE.

Supply and fixing aluminium Strip 25 x 3.15mm and fixing screws from aluminium air termination rod to test point terminal as down conductor and roof conductor including taking down of old rusted complete all as specified and as directed. Note:- All the joints shall be made with nuts & bolts to get proper conductivity.

Supply and fixing Copper Strip 20 x 3.15mm and fixing with screws as continuous lead from Copper air termination rod to test point ternimal as down conductor, roof conductor and continuous earth lead to test point terminal including taking down of old rusted complete all as specified and as directed. Note:- All the jonts shall be made with copper brazing to get proper conductivity.

Fixing only old aluminium/ copper strip of any size on insulator including straightening to old strip etc complete all as specified and directed.

Earthing complete with Copper earth plate electrode 600mm x 600mm x 3.15mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level with top edge of earth plate not less than 1.5 m below the normal ground level) connected with and including to copper strip as earth wire 20 x 3 mm dia by means of bolts, nuts, check nuts and washers of brass all as shown in elelctrical plate No 3 including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, 40mm dia GI light grade protection pipe with funnel and wire mesh, PCC Pit in 1:2:4 type B 1 using 20mm graded stone aggregate with angle iron 40x40x5mm frame, RCC pit cover of suitable size complete all as specified and directed by Engineer-in-Charge/GE and testing for required value complete. Note :- (i) Item include the cost of earth lead and GI protection pipe upto 7.5 mtr length. (ii) On completion of Earthing Contractor should check Earthing Results and submit the Test Report to Engr-in-charge. If desired results are not obtained then Earthing shall be redone by the contractor at his own cost.

Cutting of concrete in paving exceeding 15cm thickness but not exceeding 30cm below ground level by using mechanical concrete cutting machine complete all as specified and as directed.

Cement concrete type C1 (1:3:6) using 20mm graded aggregate for making good distrubed surface per existing finished even and smooth complete all as specified and as directed by Engr-in-Charge/GE.

Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6.00mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level with top edge of earth plate not less than 1.5 m below the normal ground level) connected to galvanised iron strip 25 x 4mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel as shown in elelctrical plalte No 3 including charcoal dust, commen salt, 20mm bore GI medium grade watering pipe, 40mm dia GI light grade protection pipe with funel and wire mesh, PCC Pit in 1:2:4 type B 1 using 20mm graded stone aggregate with angle iron 40x40x5mm frame, RCC pit cover of suitable size complete all as specified and directed by Engineer-in-Charge and testing for required value complete. Note :- (i) Item include the cost of earth lead and GI protection pipe upto 7.5 mtr length. (ii) On completion of Earthing Contractor should check Earthing Results and submit the Test Report to Engr-in-charge. If desired results are not obtained then Earthing shall be redone by the contractor at his own cost.

Earthing complete with galvanised steel earth plate electrode of size 600x600x6.00 thick as earth electrode burried directly in ground earth plate not less than 2.25m deep below normal groung level with top edge of earth plate not less than 1.5 m below ground level connected to and including galvnised steel earth lead wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed inculding providing earth wire protection pipe GI light grade 15mm dia from earth plate to main switch board / panel , watering GI pipe medium grade 20mm dia with mesh and funnel at top , earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of characoal dust and salt all around the earth plate , earth work in any type of soil, remaning surplus excavated material all as required at site and specified in EP no 3 of SSR part I 2009 or directed by Engineer-in-Charge/GE. Note :- (i) Item include the cost of earth lead and GI protection pipe upto 7.5 mtr length. (ii) On completion of Earthing Contractor should check Earthing Results and submit the Test Report to Engr-in-charge. If desired results are not obtained then Earthing shall be redone by the contractor at his own cost.

Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I of capacity 500 Ltrs.

Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I of capacity 1000 Ltrs.

Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I of capacity 2000 Ltrs.

Supply and fixing single phase electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH

Supply and fixing three phase electronic meters temper proof LCD display with polycarbonate cover 415 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH

DEV RAJ MAGOTRA

PAUL TRADERS

SINGH CONST CO