PROVIDING LT LINE WITH 45 WATT LED STREET LIGHTS BEHIND SHOPPING CENTRE AND IN FRONT OF GH-I SEC-23 U/E PANCHKULA. (INCLUDING THREE YEARS FREE MTC./ DEFECT LIABILITY PERIOD FREE OF COST).

[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required.

NS Item -Supply and Erection of ACSR conductor 50 mm2 conforming to IS 398 (Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments as per UHBVN specification including stringing and sagging as well as jointing and binding with insulators at supports complete in all respect upto the entire satisfaction of Engineer-in-Charge (Ex-GST 18%)

NS Item -Supply and Erection of Galvanized steel item (Flat, Angle, Channel) and Nut and Bolts etc. including cutting, bending to the required shape, drilling hole, carriage, loadingunloading complete in all respect up to the entire satisfaction of Engineer-in-charge.(Ex-GST 18%).

S/E of G.S.L. wire 8 SWG conforming to ISS: 280/1978/1963 with latest amendments complete in all respect and erection of the same upto the entire satisfaction of Engineer-In-charge. Ex-GST 18 %

S/E of M.S. Stay set complete with elbow and Nuts complete in all respect made out of M.S. Rod 18mm dia and 1.8mtr. long to with stand 1000 Kg load under tension and upper and theaded upto 0.25 Mtr. Length and elbow made out of 16mm dia M.S. round shall be welded firmly on M.S. Angle of size 50 x 50 x 6mm of 180mm and (conforming o ISS 226, ISS 1732/1971) with latest amendments three of and hexagonal Nuts conforming to ISS 136/1971 with latest amendments on pole complete in all respect upto the entire satisfaction of Engineer-In-Charge. S/E of stay set 2 No. for 9 Mtr. Long PCC pole alongwith GSS wire and Disc insulator complete with Clamps and Nuts and Bolts.Ex-GST 18 %

Supply and Erection of ACSR conductor 30 mm2 conforming to IS 398 (Part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and IS 1778-1980 with latest amendments as per UHBVN specification including stringing and sagging as well as jointing and binding with insulators at supports complete in all respect upto the entire satisfaction of Engineer-in-Charge (Ex-GST 18%)

Supply and erection of bracket 1 Mtr long made of 32mm dia (Nominal), medium gauge G.I. pipe for fixing of street light fitting on 9 Mtr long PCC poles including cost of 6 Nos. GI nut and bolts with two nos. clamps made of 50x6mm GI flat complete in all respect upto the entire satisfaction of the Engineer-in-charge (Ex-GST 18%)

Supply, Erection and Transportation up to site including all taxes as per latest Govt. Instruction amended time again of Prestressed cement concrete pole as per IS: 1678/1960. 9 Mtr. Long 105mm x 115mm at top and 105mm x 315m at bottom with working load of 200kg. Buried 1.80 min ground or as per UHBVNL specification complete in all respect up to the entire satisfaction of Engineer-in-Charge(Ex-GST 18%).

Supply, Installation Testing and Commissioning of LED Street Light Fixture with Wattage range of (45 Watt) with body made of High Pressure Single Piece Die Cast Aluminum Alloy and cover made of PMMA (polymethymethacrylate) having system Lumen)120Ipw with inbuilt Protection against Short Circuit, Miswiring, Over Voltage and Surage Protection of 6 KV. The IP of fixture and Driver Compartment should be IP66 and same for the LED Compartment. The driving current should be ( 700mA with THD ( 5% and PF ). 90 and Operating Voltage between 120-270V and CRI ) 70 and Impact Resistance of IK)05. The specifications as mentioned above should be duly tested and Mentioned in LM79 Report from Govt. Approved NABL Accredited Labrotary and LM80 Report of LED Chip from the Manufacturer required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-Charges of the work. (Warranty- 3 Years Including Driver against any manufacturing defect) (Including Three Years replacement warranty and three years Free Mtc./Defect Liability Period Free Of Cost). The logo of company should be embossed on the fixture. (Make: Bajaj / Philips / LT/Panasonic/Wipro or equivalent make approved in HSVP).