Replacement of Old Vintage analog type OCB into New Microprocessor logic based ACB 630 Amps, 50 KA, 4 Pole adjustable type Panel Board and connected items of works required at ESI Hospital, Salem.

MV Panel :- Supply & Erection of Panel indoor type fabricated with 16 SWG CR sheet with Powder coated, dust and vermin proof, size of panel should duly accomodated & comprising with following incomer and outgoings switch gears and connected items required at site for cable glands, Aluminium lugs off sizes, control wirings, ferrule with copper lugs with necessary connections with existing system by providing pedastal with PCC and civil work required at site as directed including taking down the unserviceable old one:-

Cost of 16 SWG CR Sheet:-(12.60 Kg/Sqmtr =32 SqMtrx12.60 =403.2Kgs

Cost of fabrication work:- Welder = 5x1250 =6250 Helper = 5x 900 = 4500 Welding rods/Cutting(Approx) = 9250 Cost of cutting/denting =5000

Disconnection/Dismantling of old systems:- Elect =4x1250 =2500 Helper =3x900 =2700

Aluminium lugs off sizes 400/185/150/10 Sqmm as required at site including crimping with T&P charges :- (a) Elect = 1x1250 =1250.00 (b) Helper =1x900 = 900.00 (c ) Aluminium lugs =LS =5250.00

Cost of angle irion of size 50x50x6 mm (4.5 Kg/Mtr) =10 mtrs x4.5= 45 Kgs

Cost of Nuts, Bolts with washers and connected items (LS)= 6000.00

Cost of cable galands off sizes 400/185/150/10 (LS) = 5000.00

Cost of control wirings off sizes 2.5/4 sqmm FRLS single core multistranded copper conductor (LS)=5000.00

Cost of copper lugs/ferrules required at site for control wirings.(LS) = 2500

Cost of Powder coated 2 coats of smoke grey paint over a coat of red oxide primer:- (a) Painter = 4x1250 =5000.00 (b) Helper =4x 900 =3600.00 (c ) Red oxide primer (LS) =2000.00 (d) Smoke Grey paint (LS) =5000.00 (e) Process of powder coating(LS) =4400.00

Cost of civil work and connected items of works required at site:- (a) Mason =04x1250 =5000.00 (b) Labour =04x 900 =3600.00 (c ) Bricks (LS) = 3000 =3000.00 (d) M' Sand (LS) = 3000 =3000.00 (e) 40/20 mm graded aggrigate(LS) =3000 =3000.00

Testing & commissioning charges with new systems:- (a) Supervisor =1x1500 =1500 (b) Elect =3x1250 =3750 (c )Helper =2x900 =1800

Cost of Transportation charges (LS) (Manufacturing workshop to Site) (LS)=5000.00

Cost of CT's,RYB indicating lamps and Danger notice plate including consumables (LS) = 2500 CTs of Ratio 600/5 =3x2000=6000

ACB 630 Amps micro processor based adjustable type with the min of 40% of its total load, 50 KA,4 Pole, Mannually Operated Draw Out, Omega model with 01 No x Under Voltage Release coil and 08 Nos x Terminal Adaptor Make: L&T/BCH/GE/Havells/Siemens/Schneider

Setting up of Mechanical inter locking with key

3 Phase Digital Multi Functional Meter.Make:L&T/HPL/Elmeasure/GE/CG/ABB

3 Phase Earth Fault Relay Make:L&T/Rishab/Usha/Siemens

Single Phase Preventer Make:L&T/Minilec/Universal/Semicon/GE/GIC

MCCB 250 Amps, 4 pole, (DG Incomer) L&T/BCH/GE/Havells/Siemens/Schneider

For Outgoings:-

250 Amps SFU + links Make : (for (a) to (e) L&T/BCH/GE/Havells/Siemens/Schneider

200 Amps SFU + links

160 Amps SFU + links

63 Amps TP MCCB

63 Amps TP MCCB

Copper Bus Bar 3 Nos of size 2 1/2"x1/4" for phase and 01 No of size 1 1/4"x1/4" for NE suitable for the panel. =170 Kgsx900=153000

Copper flat earth strip of size1"x1/8" suitable for the panel.=11 kgsx900=9900

Cost of 16 SWG CR Sheet:-(12.60kg/sqmtr) =6.02 Sqmtrx12.60=75.85Kgs Say=76 Kgs

Cost of fabrication work:- Welder = 2x1250 =2500 Helper = 2x 900 = 1800 Welding rods (Approx) = 1500

Disconnection/Dismantling of old systems:- Elect =1x1250 =1250 Helper =2x900 =1800

Aluminium lugs off sizes as required at site including crimping with T&P charges :- 185/150/10 Sqmm (a) Elect = 1x1250 =1250.00 (b) Helper =1x900 = 900.00 (c ) Aluminium lugs =LS =1000.00

Cost of angle irion of size 50x50x6 mm (4.5 Kg/Mtr) =(0.60+1.00+0.60+1.00)=3.20 Mtrsx4.5=14.40 Kgs say=14.50

Cost of Nuts, Bolts with washers and connected items (LS)= 3500.00

Cost of cable galands off sizes 185/150/10 (LS) = 1500.00

Cost of control wirings off sizes 2.5/4 sqmm FRLS single core multistranded copper conductor (LS)=2500.00

Cost of copper lugs/ferrules required at site for control wirings.(LS) = 2500.00

Cost of Powder coated 2 coats of smoke grey paint over a coat of red oxide primer:- (a) Painter = 2x1250 =2500.00 (b) Helper =2x 900 =1800.00 (c ) Red oxide primer (LS) =1000.00 (d) Smoke Grey paint (LS) =3000.00 (e) Process of powder coating(LS) =1000.00

Cost of civil work and connected items of works required at site:- (a) Mason =04x1250 =5000 (b) Labour =04x 900 =3600.00 (c ) Bricks (LS) = 2000 =1000.00 (d) M' Sand (LS) =3000 =3000.00 (e) 40/20 mm graded aggrigate(LS) =3000.00

Cost of Transportation charges (LS) (Manufacturing workshop to Site) (LS)=2500.00

Incomer :-

MCCB 250 Amps TP Make: L&T/BCH/GE/Havells/Siemens/Schneider

Cost of CT's,RYB indicating lamps and Danger notice place including consumables (LS) = Cts=3x2000=6000 +2500

Out goings:-

MCB 63 Amps SP Make: L&T/BCH/GE/Havells/Siemens/Schneider

Copper Bus Bar of size 3x1"x1/4" for phase and 1x 1"x 1/8" for NE suitable for PDB.

MCB DB, 7 Segment double door Make: (a) to(d) L&T/BCH/GE/Havells/Siemens/Schneider

MCB, 32 Amps, TP

ELCB 32 Amps, DP

MCB, 6-32 Amps, SP

3.5Cx400 Sqmm, ALAR XLPE cable Make: polycab/Havells

3.5Cx400 Sqmm end termination materials

3.5Cx185 Sqmm end termination materials

3.5Cx150 Sqmm end termination materials

4.0Cx10 Sqmm end termination materials

Cable laying charges for 3.5Cx400 Sqmm

Taking down old U/s one and Errection of new 7 segment DB and make good the distrubed surfaces to match with existing one