PROVN OF LOW SECURITY WALL IN LIEU OF TEMPORARY BARBED WIRE FENCING AROUND BUTCHERY AT INS CHILKA UNDER GE CHILKA

Amount

Dismantling posts or struts (wood, steel , RCC) any section, including taking out embeded portion in concrete , brick work, masonry etc and making good disturbed ground complete all as specified and as directed.

Dismantling structural steel work including door gates but excluding framed truss etc of any description complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement or lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and as directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc. or for , manholes not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

M&L cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation,filling and mass concrete complete all as specified and as directed.

M&L for walling of random rubble , uncoursed , well bonded and solidly hearted , built in cement mortar 1:6 complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in wall,retaining wall, pillars ,columns, posts etc complete all as specified and as directed.

M&L for providing reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in foundation, footing,plinth beam, bases of column and similar works complete all as specified and as directed

M&L for providing reinforced cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as in column ,pillars,pier, posts and struts complete all as specified and as directed

Use and waste of form work to sides of concrete foundation, footing, bases of column,side and soffit of foundation and plinth beam, rough finished surfaces of concrete complete all as specified and as directed

Use and waste of form work to sides of pillar, post, struts,columns, rough finished surfaces of concrete complete all as specified and as directed

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and as directed

All as per item No 13 above but 5 mm dia and over upto 10 mm dia as in stirrups, spacers and binders complete all as specified and directed

M&L cement concrete 1:2:4 type B-1 using 20 mm graded aggregate as plinth course, coping, bed plate etc including necessary use and waste of form work complete all as specified and as directed.

S&F mild steel post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc and conforming to similar work Fe-290 grade E-165 complete all as specified and as directed.

S&F mild steel framed work as gates, including pintle hinges, stops, hand made sliding bolts, etc, with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed.

M&L 10 mm thick rendering on fair faces of brick work or stone masonary surface in cement mortar 1:4, surface finished even and fair complete all as specified and as directed

M&L 15mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 , surface finished even and fair complete all as specified and directed.

Taking down existing Galvanised steel barbed wire of any type and of any description complete all as specified and as directed. Note : Each line of wire shall be measured.

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed. Note : Each line of wire shall be measured.

Fixing only old serviceable galvanised steel barbed wire of any type and of any description complete all as specified and as directed. Note : Each line of wire shall be measured.

M&L for preparation of new steel surface of any description over 10 cm in width or grith and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L preparation of new plastered surface of external walls and applying two coats of weather proof acrylic emulsion paint exterior grade (100% Acrylic) of silver streak shade of Asian paints of any colour as approved over a coat of primer on prepared external surfaces of walls complete all as specified and as directed

S&F for concertina coil (dia 600 mm) SRPBT made up hot dip GI wire (Spring centre) have 50 No of turn 125 clip barb length 23.5mm, 2.5 mm high carbon core wire, tape with 18.60 mm, centre with 7.4 mm including anticorrosive bitumineous paint coated all as per IS 158 (as per sample) complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

Removal excavated soil exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

HARI PALAI

BHARAT KUMAR BALL

M/S JAGANNATH SASMAL

SUBAL CHARAN PRADHAN

d ravichandran