Construction of 50 bedded Capacity of Working Women Hostel at Technical University Daruhi, Distt. Hamirpur (HP).

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kind of soil including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, with all lead and lift. All kind of soil including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

Stone filling behind retaining walls including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm.(Thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in situ-reinforced concrete and plain concrete work, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.:-(a) Foundation footing bases of columns etc. and mass concrete.

b) Columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in Super-structure for all floor level in all heights.

(c) Beams, cantilevers, girders and lintels sides and soffits of beams, beam hunchings, cantilevers, bressumers and lintels up to any depth in Super-structure for all floor level in all heights.

(d) Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto any thickness in Super-structure for all floor level in all heights.

d) Stair cases (except spiral staircases) excluding landing but prepairing of the surface and finishing of nosing upto all floor levels.

e) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge including carriage of material in all leads and lifts. (A) All works upto plinth level

(B) Above Plinth level

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all heights thermo-Mechanically Treatedbarsofgrade Fe-500D or more.

Brick work using common clay burnt building bricks in superstructure above ground level in cement mortar 1:6 (1cement: 6 sand) 1st class bricks upto all height.

Half brick masonry in comman burnt clay building bricks in superstructure above plinth level upto floor two level with cement mortar 1:4(1cement:4 sand) 1st class bricks

Providing and Fixing PPGI (Pre-Painted Galvanized Iron) door/window frames are made from high-quality galvanized iron sheets coated with a layer of paint (12 guage sheet and weight not less then 3.64 Kg/mtr) as including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

Providing & fixing machine made Laminated flush shutters for doors including black enamelled iron butt hinges with necessary screws etc. complete 40mm thick. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

Providing and fixing Powder coated anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws ACP Sheet 4mm thick and Glass in glazing. All complete as per architectural drawings and the directions of Engineer-In-Charge.

P/F wire gauge shutters using galvanised M.S. Wire gauge of I.S. Gauge designation 85 G with wire of dia.0.56mm for doors,windows & clerestorey windows i/c bright finished black enamelled iron hinges with necessary screws.40mm thick 2nd class deodar wood. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clearstory windows including black enamelled iron butt hinges with necessary screws. 40mm thick 2nd. Class Deodar Wood. including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts. : (A) 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :(A)200x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (a) 125 mm

P/L Granite Stone in flooring 20mm thick base in Cement Mortar 1:4 (1 Cement : 4 Sand) i/c jointing with grey cement slurry mixed with pigment to match the shade of pigment to match the shade of granite stone i/c rubbing and polishing complete 20mm thick.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

Providing and laying spartic ceremic tiles 5.5mm thick in flooring 300x300mm size on treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cement including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

6mm cement plaster in ceiling with cement mortar 1:3(1cement:3 sand) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastring upto all floor levels including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. within all leads and lifts.

Applying birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete.

Distempering (two coats) with oil boud washable disremper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and menufacture after thoroughly brushing the surface free from mortar dropping and other forign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.

Finishing wall with Apex of Asian brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : (A) Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing on wall face PVC (D-plast) rain water pipes for working pressure not less than 4.5kg/sqm i/c filling the joits with the approved adhisives complete of Phinolex/ D-plast. (A) a)110 mm diameter

P/f P.V.C. Fittings and accessories of Phinolex/ D-plast. (A) P/f PVC plain bend ISI marked including fixing with approved adhesives etc. Complete 110 mm

Providing and fixing M.S. holder bat clamps ISI marked of approved design with steel screws and raw plugs etc. complete. 110mm

Making khurras 45x45cm with average minimum thickness of 5 cm. cement concrete 1:2:4 (1 cement :2 sand: 4 stone aggregate of 20 mm nominal size) finished with 12 mm cement plaster 1:3 (1 cement : 3 sand ) and coat of neat cement rounding the outlet complete

Providing under layer for plinth protection of 75 mm (Seventy five millimeter) thick (unconsolidated) bed dry brick/stone aggregated 40 mm (Forty millimeter) nominal size with rammed and consolidated and grouted with fine sand including preparation of ground, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge and 50 mm (Fifty millimetre) thick in cement concrete 1:3:6 (One cement isto three sand isto six graded crushed stone aggregate 20mm (Twenty millimetre) nominal size including finishing the top surfaces of concrete smooth as per HP. PWD. Specifications of 1990 Volume-I, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and fixing Mild steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts. Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg)With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked black solid plasticseat and lid

Providing and Fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and Fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and Fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and Fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 600x450 mm (outer dimensions)

Providing and Fixing towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive, cost of cutting and making good the walls and floors complete. 110mm x 75mm including carriage of material in all leads and lifts.

Providing and fixing 100 mm stainless steel grating or nahani trap.

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore

Providing & Fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm

Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) 20 mm

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 ltr Capacity

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall. (A) 15 mm dia nominal bore

(B) 20 mm dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : (A) 15 mm nominal bore

(B) 20 mm nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.15 MM dia

Providing and fixing high pressure PVC spigot and socket soil waste and ventilating pipes including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts (A) 110mm dia.

(B) 75mm dia.

Providing and fixting PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts (A) 110mm dia.

(B) 75mm dia.

Providing and fixting PVC single equal branch with oval access door, insertion rubber washers 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts. A) 110mm dia.

75mm dia

Providing and fixting PVC door bend with oval access door, insertion rubber washers 3mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts. A) 110mm dia.

75mm dia.

Providing and fixing M.S. holder bat clamps ISI marked of approved design with steel screws and raw plugs etc. complete. (A) 110 mm nominal size

(B) 75 mm nominal size

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Circular shape 450 mm internal diameter

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.

Providing and laying 100mm(Hundred millimetre) dia PVC pipe weep holes in brick masonry/stone masonry ,plain/reinforced concrete abutment,wing wall,return wall and retaining /breast walls extending through the full width of the structure with slope of 1(V):20(H) towards drainage face complete as per drawing and MORTH technical specifications clause2706 and as per direction of Engineer-in-charge including carriage of materials witin all leads and lifts and other incidental The rate including octroi, royality, Malkana, toll tax sale tax, GST or other taxes imposed by the Government .

RAKESH GOEL (BID ID -545306)

JEET KUMAR GUPTA (BID ID -545936)

Suket Construction Co. Pvt. Ltd. (BID ID -546281)

Manohar Lal (BID ID -546673)

Rattan Lal Sharma (BID ID -546678)