Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹13.9 L+₹47,633 (3.54%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹14.0 L+₹54,063.50 (4.02%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹14.1 L+₹63,634 (4.73%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹14.4 L+₹95,577.50 (7.11%)Rejected-Finance | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹27,180
Closing Date
17 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) JORHAT
GE (AF) JORHAT PIN-785005
SR TO CENTRAL STERILE SERVICE DEPT IN BUILDING NO P-27 (ICU/OT) AT AFH UNDER GE (AF) JORHAT
2023_MES_587244_1
8533/E8
Open Tender
Civil Works
Item Rate
120 days
GE (AF) JORHAT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) JORHAT
₹27,180
Yes
4 May 2023
28 Mar 2023
19 Apr 2023
28 Mar 2023
17 Apr 2023
10 Apr 2023
Amount
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ) and removing serviceable tiles to store and rubbish off the permisses, complete all as specified and as directed.
Taking down cement plaster any description on brick walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with Water, etc. complete all as specified and as directed.
M&L for coloured non skid ceramic tiles of size 6 to 7 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or colured cement to match, including 20mm thick screed bedding layer in cement mortar (1:6) complete all as specified and as directed.
S&F glazed ceramic coloured tiles in vertical surfaces such as dado etc, size 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick rendering in cement mortar (1:4) as backing layer for tiles complete all as specified and as directed.
S&F as in repairs 15mm bore bib Tap, cast copper alloy, "Chromium Plated" with capstan heads handle, screwed for iron pipe complete all as specified and as directed.
S&F as in repairs 15mm bore angle cock fancy type CP with long shank and cup cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and as directed.
S&F as in repairs vitreous china squatting pan ‘ORISSA’ pattern of size 580X440 mm White, with 'P' or 'S' trap integral foot rest, providing joints between flush pipe and socket of WC pan (excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime concrete bedding, complete all as specified and as directed. Make : Parryware Cat part No :C0117 or its equivalent model from make as specified in particular specifications.
S&F vitreous China Wash Down Water Closet Pan (Pedestal Pattern) White including fixing Bolts (excluding Flushing Cistern and Flushing Pipe) with Plastic Water Closet Seat, Black, Closed Pattern with Recessed Bottom and over including Mild steel chromium plated aluminium hanging device and including taking out unserviceable WC and making good disturbed surfaces with cement mortar (1:3) complete all as specified and as directed Make : Parryware Cat part No :C0278 or its equivalent model from make as specified in particular specifications.
S&F as in repairs 10 litres capacity PVC low level syphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and as directed.
S&F plastic water closet seat of matching colour of EWC closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
S&F vitreous china wash hand basin size 550 x 400mm (flat back or angle back type) white with 32mm dia brass chromium plated waste fitting, galvanised iron 'light grade' 32mm bore waste pipe, a pair of cast iron brackets duly painted / erecting stand including cutting and pinning in ends, making good distrurbed surfaces in cement mortar (1:3) inlcuding taking down old unservicable wash hand basin and connected items complete all as specified and as directed.
S&F bevelled edges mirror of 600x450mm size with 6mm thick glass hatching on four sides fixed on wall with stainless steel studs screws with cap 20mm dia etc complete all as specified and directed.
S&F as in repairs brass CP tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long embedded in walls complete all as specified and as directed.
S&F as in repairs chromium plated toilet paper holder fixing with chromium plated brass screws complete all as specified and directed.
S&F as in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S&F as in repairs pillar taps 15mm bore, Cast Copper Alloy with Capstan Heads, fancy type, Chromium Plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe complete all as specified and as directed.
S&F as in repairs grating doom 125mm dia with waste hole of PTMT. (Minimum weight 40gms) fixed in floor including making good disturbed surfaces in cement motar (1:3) complete all as specified and as directed .
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as per specified and as directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as per specified and as directed.
S&F 15mm bore galvanised iron water tubes 'Medium Grade' with all fittings and fixed to walls or ceilings or laid in floors, complete all as specified and as directed.
S&F 20mm bore galvanised iron water tubes 'Medium Grade' with all fittings and fixed to walls or ceilings or laid in floors, complete all as specified and as directed.
S&F rotational moulded polyethylene (HDPE) water storage tank 500 litre capacity (cylindrical vertical with closed top), black in colour, three layered construction, hoisted and fixed in position all specified in MES schedule Part-I, including dismantling of water storage tank with float valve of any description complete all as specified and as approved.
S&F as in repairs 20mm dia ball brass valves, high pressure, with polythene float and flynut, screwed for iron pipe or brass ferrule complete all as specified and as directed.
S&F as in repairs vitreous china urinals, bowl type of size of 465 x 355 x 265 mm (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm each and re-fixing the same in the same opning after taking down easing and adjusting and also re-fixing builders hardware as required including renewal of unserviceable screws complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.
M&L for 40mm thick plain cement concrete (1:2:4), type B-0 (using 12.5mm graded stone aggregate) as in floors and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.
M&L for vitrified ceramic coloured tiles 10mm thick (Square / rectangular) polished light shade, area of each tile not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or colured cement to match, including 15mm thick bedding layer in cement mortar (1:6) cement as screed bed complete all as specified and as directed.
M&L for vitrified ceramic tiles 10mm thick (Square /Rectangular) polished, light shade or any shade area of each tile not exceeding 0.38 sqm, as in skirtings etc. set and jointed in neat cement slurry and pointed in white or colured cement to match, including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.
S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
M&L for applying one coat of oil bound distemper after preparation of old surfaces of wall complete all as specified and directed.
M&L for applying one coat of synthetic enamel paint after preparation of old painted wood and wood based surfaces of any description not otherwise described, over 10cm width or girth complete all as specified and as directed.
M&L for applying one coat of white wash after preparation of old decorated plastered surfaces of ceiling complete all as specified and as directed.
M&L for applying one coat of white wash to wall after preparation of old plastered or unplastered surfaces of wall and cornices by brooming down with steel wire brushing, scraping down smoke spot moulds, mass and efflorescent salts and trating oil and greay spots complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint over one coat of red oxide, zinc chrome primer after preparation of new or previously untreated steel surfaces of any description not otherwise described, over 10cm width or girth complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint after preparation of old steel surfaces of any description not otherwise described, over 10cm width or girth complete all as specified and as directed.
M&L for applying two coats of synthetic enamel paint over one coat of pink primer after preparation of new wood surfaces of any description not otherwise described, over 10cm width or girth complete all as specified and as directed.
M&L for rendering 15mm thick on other than fair faces of brick wall finished fair and even in cement mortar (1:6) complete all as specified and as direcetd.
M&L for rendering 15mm thick on other than fair faces of brick wall finished fair and even in cement mortar (1:4) complete all as specified and as direcetd.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces of ceiling finished even and smooth (without using extra cement complete all as specified and as directed.
M&L for applying two coats of cement base paint over one coat of approved primer after preparation of newly plastered surfaces of walls complete all as specified and as directed.
M&L for applying two coats of oil bound distemper after preparation of newly plastered surfaces of walls clearcolle on plastered and other surfaces, preparatory to distempering complete all as specified and as directed.
M&L for applying three coats of white wash on ceiling surfaces after preparation of newly plastered surfaces of ceiling complete all as specified and as directed.
S&F Mild steel hold fast made of flat iron conforming to 410-0 or Fe-310-0 compelete all as specified and directed.
M&L for plain cement concrete (1:3:6) type C-1 (using 20 mm graded agg) as in coping , PCC block for fixing of hold fast, sanitary fittings etc. complete all as specified and as directed.
Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.
M&L for brick work with subclass 'B' Bricks straight or curved on plan exc. 6 mtr mean radius built in CM (1:4) complete all as specified and as directed.
S&F as in repairs PVC connection 15mm size with PTMT Nuts of length 450mm complete all as specified and as directed.
Taking down chowkat or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm and not exc. 4sqm each complete all as specified and as directed.
Taking down chowkat or frame with shutter (without taking off shutters from the frame) n exc 1.5 Sqm each complete all as specified and directed.
S&F 2nd class hard wood plain ,solid, straight, chowkhat and framed, wrought, rebated on the solid,rounded or chamfered, put together with pinned at joints complete all as specified and directed
S&F 35mm thick factory made 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F 30mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as per specified and as directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as per specified and as directed.
S&F factory made Solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded palin colour PVC 'C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for TOP rail, lock rail and bottom rail on on either side and as gap insert for top rail and bottom rail . Panellining of plain colour PVC sheet to be fitted in the MS frame welded /sealded to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.
Taking down old windows of any description and size and S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm plain float glass and 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade complete all as specified and directed.
Dismantling aluminium door shutter including assembly exceeding 1.00 Sqm but not exceeding 2.00 Sqm and repair for proper functioning by adjusting moving assembly of floor spring, pivot, hinges etc and re-erecting the shutter including straightening , cutting, tightening of door shutter and making easy movement of the shutter including replacing of mortice lock door, door handles, rubber glass beading complete all as specified and as directed. (Note : Floor springs & mortice locks are to be measured and paid separately under relevant item here-in-after)
Taking down partitions of any descriptions and other similar works and S&F aluminium partition with powder coated aluminium frame work with standard sections of medium size and weight not less than 1.90 Kg/rm and confirming to catalogue of Jindal or equivalent. The partition shall be fixed with 12mm thick prelaminated particle board with decorative lamination on both sides of approved colour, in bottom panel and with 5.5mm thick glass of approved make in top panel. The frame shall be with one or more rebates including joining cleats , glazing clips, standard rubber beading etc, including fixing properly at floor level and wall / column faces properly complete all as specified and directed .
S&F aluminium grill of standard section, type 'A' diagonal, with U rail necessary jointing cleats, screws fixed with frame etc. complete all as specified and as directed. Make Jindal / Hindalco its equivalent model from make as specified in particular specifications.
S&F aluminium louvered ventilators of size 100mmx25mmx1.50mm section including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. after taking down existing steel ventilator complete all as specified and as directed
S&F as in repairs locking arrangements for aluminium doors i.e , by placing new brass lock 4 lever, vertical type of 65mm, with triplicate key etc complete all as specified and as directed.
M&L for 12mm thick Prelaminated particle boards exterior grade, prelaminated both sides with decorative choice lamination including necessary fitting complete all as specified and directed.
S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.
S&F as in repairs door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed with aluminium (extruded section body) complete all as per specified and as directed.
S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.
S&F 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.
S&F 100mm size MS butt hinges, medium weight, cold rolled complete all as specified and as directed.
S&F 250 mm long sliding door bolt aluminium alloy, anodised with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F 100mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.
S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.
S&F as in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and as directed.
S&F solar control film 25 micron exc 1.5 sqm, reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.
Dismantling mild steel work of any description complete all as specified and as directed.
Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
S&F rolled mild steel square / round hollow sections as in posts, main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde-E- 250) quality-A complete all as specified and as directed.
S&F Pre- painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw complete all as specified and as directed.
S&F Pre- painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,ridge,facia etc.complete fixed with self tapping screw complete all as specified and as directed. Note:- The contract sum shall be calculated by deducting the amount shown in schedule of credit attached to this tender, from total amount of Schedule 'A'/BOQ.
M/S RK SAHA AND CO
M/S PAUL CONSTRUCTION
jawaharlal jaiswal and co
M/S PS ENTERPRISE
SURAJIT GOGOI
M/S D J ENTERPRISE
M/S Deep Construction
Bidder Name
M/S RK SAHA AND CO
M/S D J ENTERPRISE
M/S Deep Construction
M/S PAUL CONSTRUCTION
M/S PS ENTERPRISE
RAJIB AND CO
jawaharlal jaiswal and co
SURAJIT GOGOI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .