COMPREHENSIVE MISC REPAIRS TO CHIEF OFFICE AND CERTAIN OTHER BLDG IN NAVAL DOCKYARD REPAIR TO BOUNDARY WALL BARBED WIRE AT ENGR MESS AND CHIEF OFFICE AND CERTAIN OTHER AREA UNDER AGE BR I UNDER GE (NW) KUNJALI COLABA MUMBAI

Amount

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings Complete all as specified and directed by Engineer-in-Charge

Material and labour in repairs for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hook and including scaffolding upto any height. Complete all as specified and directed by Engineer-in-Charge.

Material and labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for Complete all as specified and directed by Engineer-in-Charge

Material and labour mild steel for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc FE 410-W(Gde E-250) quality A Complete all as specified and directed by Engineer-in-Charge

Material and labour Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., of grade Fe 410 -W(Gde-E- 250) quality- A complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.

Material and labour for Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment. Complete all as specified and directed by Engineer-in-Charge

Material and labour for Rolled mild steel in Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. Complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing New or previously untreated steel surface of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide Primer Complete all as specified and directed by Engineer-in-Charge

Dismantling of Wall panelling, partition and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including Aluminium grid frame work. Complete all as specified and directed by Engineer-in-Charge

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish of the premises. Complete all as specified and directed by Engineer-in-Charge

Material and labour for (450mm x300mm ) x 7 mm thick coloured glazed ceramic tiles as in dado/vertical set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in cm 1:4 complete all as specified and directed.

Material and labour for (300mm x300mm ) x 7 mm thick coloured glazed ceramic tiles as in Floor/roof set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 20 mm thick screed bed in cm 1:4 complete all as specified and directed.

Material and labour for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling board/tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50 x 40 x 0.63 mm and cross tee of size 23.50x23.50x0.63 mm and angle size 19x19x0.63 mm including 3 mm GI wire for suspending holts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/far as required including making necessary recesses/projected pattern complete all as spoecified and as directed.

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

Supply and fixing in repairs 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :- Measurement shall be taken along the centre line of the pipes) Complete all as specified and directed by Engineer-in-Charge

Supply and fixing 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in floors/trenches. Complete all as specified and directed by Engineer-in-Charge

Supply and fixing 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls and laid in floors/trenches. Complete all as specified and directed by Engineer-in-Charge

Supply and fixing for PVC (SWR) bends any radius 160mm bore complete Complete all as specified and directed by Engineer-in-Charge

Supply and fixing 110 mm dia PVC ( SWR) grade double T/Y with access doors including fixing clips Complete all as specified and directed by Engineer-in-Charge

All as per item No 25 above but 75mm dia

Material and labour Plain, black, mild steel sheeting, 1 mm thick in ridges, hips, valley gutters,drip and straight flashings (length and girth as fixed) Complete all as specified and directed by Engineer-in-Charge

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc Complete all as specified and directed by Engineer-in-Charge

Material and labour for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and but half brick thick wall built in CM 1:4. Complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick / surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc Complete all as specified and directed by Engineer-in-Charge.

Material and labour for Water proofing plaster 15 mm thick on Brick masonry surface or surface in 1:6 and finished even and smooth with out using extra cement. complete all as specified and directed by EIC (Note : WPC will be measured and paid seperated). Complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering 20mm (15 mm thick backing coat in CM(1:6)+ 5mmthick finishing coat in CM (1:4) thick on fair faces of brick work or concrete Surface and finished even and smooth with out using extra cement. complete all as specified and directed by EIC (Note : WPC will be measured and paid seperated). Complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering 5 mm thick in CM 1:3 on ceiling surface Complete all as specified and directed by Engineer-in-Charge

Supply only Waterproofing chemical of ISI marked complete all as specified and directed by Engineer-in-Charge

Material and labour for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying One coats of oil bound distemper over a coat of wall primer. Complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of new plastered wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer. Complete all as specified and directed by Engineer-in-Charge

Material and labour for New treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding Complete all as specified and directed by Engineer-in-Charge

Material and labour for Preparation of new Plaster Surface of Ceiling and applying three coat of White wash on ceiling . Complete all as specified and directed by Engineer-in-Charge

Supply and fixing Powder coated aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. Complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 3 mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab incircular/rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm C/C on exceeding column/beam/slab to hold APC cladding etc (Note : colour/pattern of ACP sheet shall be given by GE).

Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each Complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each Complete all as specified and directed by Engineer-in-Charge

Supply and fixing concealed star lock powder coated for aluminium window fixed as per manufacturers instructions Complete all as specified and directed by Engineer-in-Charge

Demolition of Unreinforced cement concrete of any description and in any position not other wise specifically provided for all as specifed and directed.

Meterial and labour plain Cement concrete 25 mm thickType B1 1:2:4 (20 mm graded aggregate) as floor all as specified and directed by Engineer-in-Charge

Material and labour for cement concrete type B1 1:2:4 (20 mm graded aggregates), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. Complete all as specified and directed by Engineer-in-Charge

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store all as specified and directed by Engineer-in-Charge.

All as per item No 47 above but 20 mm bore GI Pipe all as specified and directed by Engineer-in-Charge

Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required Complete all as specified and directed by Engineer-in-Charge

Supply and fixing 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed Complete all as specified and directed by Engineer-in-Charge

As per item No 50 above but 20mm dia medium GI Pipe

Supply and fixing 100 mm stainless steel Butt hinges all as specified and directed by Engineer-in-Charge

Supply and fixing Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed by Engineer-in-Charge

Supply and fixing aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm all as specified and directed by Engineer-in-Charge

Supply and fixing Extruded aluminium anodised alloy handles, fabricated type 150mm size all as specified and directed by Engineer-in-Charge

Material and labour for Floor door stopper of aluminium alloy body 150 mm long and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs wall hung WC with UF Soft close slim seat cover hinges, fixing accessories, accessories set incl trap/connecting piece Complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs vitreous china wash down water closet pan coloured (pedestal pattern) including plastic sheet cover with nuts and bolts etc Complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete Complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs 10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets etc. Complete all as specified and directed by Engineer-in-Charge

Supply and fixing white glazed earthen ware vitreous Oval type china wash hand basin of size 600x700 mm with and including CI brackets, with granite including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc Complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair for urinal pot with sensor size 370x900x610 mm star white complete all as specified and directed (Hindware CAT PPART NO-60018) or as approved by GE

Supply and fixing overhead shower of 100 mm round shape single flow (ABS Body chromium plated with gray face plate) with rubit cleaning system ( Make- Jaquar CAT PART NO- OHS-1989) or as approved by GE complete all as specified and directed by Engineer-in-Charge

Supply and fixing Corner glass shelf with brackets (Make - Jaquar CAT PART NO- CAN-1173) or as approved by GE complete all as specified and as directed

Supply and fixing in repairs CP Pillar cock taps 15 mm bore with lift type operating knob and base flange complete all as specified and directed by Engr-in-Charge. (Make - Jaquar CAT PART NO- FLR-CHR-5015) or as approved by GE

Supply and fixing in repairs CP bib cock 15 mm bore complete all as specified and as directed by Engr-in-Charge (Make Jaquar CAT PART No- CON-CHR-047KN) or as approved by GE

Supply and fixing in repairs CP angular stop cock with wall flange of 15 mm bore (Make - Jaquar CAT PART NO- CON-CHR-059KN). Complete all as specified and directed by Engineer-in-Charge or as approved by GE

Material and labour stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. Complete all as specified and directed by Engineer-in-Charge

Supply and fixing towel rail 60cm long between flange, fixed in repairs (Make - Jaquar CAT PART NO- ACN-CHR-1111NM). Complete all as specified and directed by Engineer-in-Charge.

Material and labour Cast Iron Nahani trap 75mm, plain with grating including setting and jointing with silvent cement to waste pipe fixed in cement concrete type B1 (1:2:4). Complete all as specified and directed by Engineer-in-Charge.

Dismantling of Stone slabs laid, bedded and pointing in any mortar and tiles of any description or thickness in floors, aprons etc. Complete all as specified and directed by Engineer-in-Charge

Material and labour for hard wear stone (of any type) granite stone slab 20 mm thick in flooring machine cut, in plateformbedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizescomplete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repair 12 mm thick Prelaminated medium density fibre board both side decorative lamination interior grade, fixed in aluminium/wooden frame work Complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified Fixed in repairs. Complete all as specified and directed by Engineer-in-Charge

Supply and fixing Vitreous china urinal partition white of size 310x700 mm slabs, terminating about 40 cm above floor line, fixed in repairs Complete all as specified and directed by Engineer-in-Charge

Supply and fixing 32mm dia PVC waste pipe for WHB and urinals fixed in repairs Complete all as specified and directed by Engineer-in-Charge

Supply and fixing Bathroom Cabinet Mirror 500x400 mm screwing in all conrner with chromium plated brass screws and cup washers Complete all as specified and directed by Engineer-in-Charge (Make Prayag : Cat Part No 556) or as approved by GE

Supply and fixing Push type taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm dia iron pipe or for brass ferrule and fixed in repairs Complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs 140mm dia overhead shower round shape single flow with air effect (ABS body & Face plate chrome plated) with rubit cleaning system all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs CP toilet roll holder with flap (Make - Jaquar CAT PART NO_ 1153N or as approved by GE) Complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts, screwed for iron pipe and fixed Complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed Complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs fancy type angle Stop Cock valve chromium plated cast copper alloy 15mm bore with crutch or butter fly handle Complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs Roller venetian blinds type made out of standard cloth of approved texture with necessary accessories etc Complete all as specified and directed by Engineer-in-Charge

Removing building material exc. 1.50 km but n exc. 5 km and depositing where directed. Complete all as specified and directed by Engineer-in-Charge

Material and labour for 12 mm thick Medium density fibre board, exterior grade, fixed to timber/ Aluminium Frame work framework with .screws all as specified and directed by Engineer-in-Charge

Material and labour for preparation and applying two coat of floor/Roof paint (Make-Indigo Floor paint) or as approved by GE. Complete all as specified and directed by Engineer-in-Charge

Material and labour for machine pressed precast concrete interlocking paver block With Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete over 25 mm thick Sand cushion Complete all as specified and directed by Engineer-in-Charge.

Material and labour for machine pressed precast concrete interlocking paver block With Grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete over 25 mm thick Sand cushion Complete all as specified and directed by Engineer-in-Charge.

Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with glossy finished of approved colour in equal proportions & pigments with red and yallow colour over including 15mm thick screed bed in CM 1:6. Complete all as specified and directed by Engineer-in-Charge

M &L for machine cut kota stone slab flooring 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 20 mm thick screed bed in cement mortar 1:4 Complete all as specified and directed by Engineer-in-Charge

M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 Complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (un-reinforced) in ground floor and pavings n.exc. 15cm thickness (below or above ground level) Complete all as specified and directed by Engineer-in-Charge

Supply and fixing of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Grade – E 165 Complete all as specified and directed by Engineer-in-Charge

Material and labour for 15 mm thick back coat in cement mortar 1:4 in vertical surface. Complete all as specified and directed by Engineer-in-Charge

Material and labour for 18 – 20 mm thick machine cut black granite stone slab as in skirting / dado, laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including necessary cutting, grinding, rubbing, polishing rounding to exposed edges Complete all as specified and directed by Engineer-in-Charge

Excavation in post holes in soft/loose soil for n.exc 0.50 cum including getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering, and removing surplus soil to a distanc n.exc 50mtr Complete all as specified and directed by Engineer-in-Charge

Material and labour PCC (1:3:6) Type C-1 using 40mm graded stone aggregate) as in foundation filling. Complete all as specified and directed by Engineer-in-Charge

Supply and fixing for MS round bars 10mm dia and over as in RCC posts & securing chainlink fencing fixed to RCC fencing post Complete all as specified and directed by Engineer-in-Charge

Supply and fixing angle iron in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) in-cluding all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 Complete all as specified and directed by Engineer-in-Charge

Supply and fixing MS flat for securing chain link fencing with post confrming to 410-0 or 310-0 Complete all as specified and directed by Engineer-in-Charge

Supply and fixing of mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed ends to be fitted with washer and one hexagonal or square nut, exc. 5 cm and not exc. 10 cm long and 11 to 15 mm dia of shank Complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing the new steel surfaces of any description n.exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. Complete all as specified and directed by Engineer-in-Charge

Material and labour for Preparation of new steel surfaes of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer. Complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs Galvanized 2 stand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts ,including securing or tying at crossings with and provision of galvanized mild steel wire , staples or steel pins etc. as directed(each line wire to be measured). Complete all as specified and directed by Engineer-in-Charge

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc.6 mtr radius built in cement mortar (1:6). Complete all as specified and directed by Engineer-in-Charge

All as per item No 108 above but except bricks

Material and labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4). Complete all as specified and directed by Engineer-in-Charge

Providing precast cement concrete type B0 1:2:4 (12.5 mm graded aggregate) louvres and jallies, 25mm thick set in Cement mortar 1:6 (measured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item 04032). Complete all as specified and directed by Engineer-in-Charge

Dismantling of post or strut embedded in concrete (wood, steel or RCC), any section including taking out embedded portion and making good the disturbed ground Complete all as specified and directed by Engineer-in-Charge

Material and Labour for 15mm thick cement plaster in cement mortar (1:4) on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement Complete all as specified and directed by Engineer-in-Charge

Shetty Construction Co

Nilesh Construction

jalandhara construction

siddharth and company

ASHOK CONSTRUCTION