SPECIAL REPAIR TO ROAD SM LIVING TO BLDG NO -121 NEAR GURBAX LINE AND JCOS MESS TO 15 NO OTM ACCN APPROX 400 MTR AT 14 GTC SUBATHU UNDER GE KASAULI

Amount

Scarifying or picking gravelled macadam or bituminous macadam surfaces exc 50mm and not exc 100mm deep in area exceeding 400sqm complete all as specified and directed.

7.5cm thick (compacted thickness) Granite , trap or Basalt WBM, with coarse aggregates of grading 2 (63mm to 40mm size) or of grading 3 (50mm to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

All as per item No 2 above but "except materials"

Preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

Applying evenly a priming/tack coat of paving bitumen of grade VG-10@ 10kg/10 Sqm on unsurfaced surface i.e. pot holes and WBM surface complete all as specified and directed.

Preparing surface of black top by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirty etc complete all as specified and directed.

Applying evenly a priming/tack coat of paving bitumen of grade VG-10@ 5kg/ 10Sqm on black top surfaces complete all as specified and directed.

Premix bituminous macadam (consolidated thickness 75mm or less) with binder content 4% by weight of total mix, rolled with 8 to 12 ton power road roller and compacted to required camber, gradient complete all as specified and directed.

Bituminous pre-mixed asphaltic dense concrete 40mm consolidated thickness with 6% binder content by weight of total mix, using bitumen of VG 10, spread ,rolled and consolidated with with 8 to 12 ton power road roller to required gradient and camber complete all as specified and directed. Note: (i) Automatic hot mixing plant of adequate capacity shall be used for heating and mixing of aggregate, bitumen etc for premix dense asphaltic concrete and mix for both items shall be laid with mechanical pavers, (ii) Quantity of bitumen in dense asphaltic concrete shall be used as per design mix and shall be approved by the GE, any variation in quantity of bitumen in design mix shall be priced as specified in the particular specification through deviation order. unit rate shall be quoted shall be deemed to include the cost of design mix.

Repair to potholes any depth, not exc 1sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

S&F for cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

S&F for metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B-1 complete all as specified and directed

S&F for solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified and directed.

Removing spoil (material obtained from scarifying) to a distance exceeding 100 metres but not exceeding 1000 metres and depositing where directed complete all as specified and directed.

Demolition of cement concrete (unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 Using 20mm graded stone aggregate as in surface channels/drains including necessary form work complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in forms, moulds/stopped ends etc complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2, 40 mm graded stone aggregate as in sub floors, filling and mass concrete etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block 80mm thick M-40 Grade of any shape and size confirming to IS 15658-2006 with grey cement & pigment complete all as specified and directed.

M&L Sand filling under interlocking coloured paver block average 25mm thick complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm down graded stone aggregate as in kerbs and including necessary form work complete all as specified and directed.

shree balaji builders