SE/CEDC/N/CBE/C/No.26/25-26

Earthwork excavation and depositing on bank with initial lead of 10 m and lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders in all soils including the cost of all materials, T&P 's, leads, lifts, etc., complete.

Earthwork excavation and depositing on bank with initial lead of 10 m and lift of 2m in Soft Disintegrated Rock (SDR), laterite, soft rock or kankar, not requiring blasting. including the cost of all materials, T&P 's, leads, lifts etc., complete.

Earthwork excavation and depositing on bank with initial lead of 10 m and lift of 2m in MR & DMR not requiring blasting including the cost of all materials, T&P 's, leads, lifts, etc., complete.

Filling with crusher stone sand for filling the foundation including cost of crusher stone sand, filling charges, with all leads and lifts, watering, consolidation etc., complete.

Plain cement concrete in CC 1:3:6, using 40mm HBG metal including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG downgraded metal machine crushed for raft foundation including cost of cement, all materials, labour, curing, all leads, lifts as per standard specification etc., complete (but excluding cost of steel reinforcement).

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG downgraded metal machine crushed for column above ground level including cost of cement, all materials, labour, curing, all leads, lifts, cost of shuttering as per standard specification etc., complete. (but excluding cost of steel reinforcement).

Brick work in CM 1:5 using class II bricks for super structure including cost of all materials, labour charges, scaffolding charges, curing, all leads and lifts etc., complete and as directed by Engineer.

Brick work in CM 1:3 using class II bricks for partition wall and others including cost of all materials, labour charges, scaffolding charges, curing, all leads and lifts etc., complete and as directed by Engineer.

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG downgraded metal machine crushed for cover slab including cost of cement, all materials, labour, curing, all leads, lifts as per standard specification etc., complete (but excluding cost of steel reinforcement).

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG downgraded metal machine crushed for lintel beam including cost of cement, all materials, labour, curing, all leads, lifts, cost of shuttering as per standard specification etc., complete. (but excluding cost of steel reinforcement)

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG downgraded metal machine crushed for Roof beam including cost of cement, all materials, labour, curing, all leads, lifts, cost of shuttering as per standard specification etc., complete. (but excluding cost of steel reinforcement)

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG downgraded metal machine crushed for sill beam including cost of cement, all materials, labour, curing, all leads, lifts, cost of shuttering as per standard specification etc., complete. (but excluding cost of steel reinforcement)

Reinforced cement concrete 1:1.5:3 mix using 12mm to 20mm HBG downgraded metal machine crushed for sunshade including cost of cement, all materials, labour, curing, all leads, lifts, cost of shuttering as per standard specification etc., complete. (but excluding cost of steel reinforcement)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Lofts (75mm tk) including cost of cement, all materials, labour, curing, vibration charges, without shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement).

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof slab of 125 mm thick including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, etc., complete. (but excluding cost of steel reinforcement.)

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for Roof slab of 100 mm thick including cost of cement, all materials, labour, curing, vibration charges, including shuttering all leads, lifts, etc., complete. (but excluding cost of steel reinforcement).

Providing steel reinforcement TMT rods up to 16 mm dia for reinforced concrete works, including cost of steel rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete.

Wall Plastering in CM 1:5, 12 mm thick on both sides of brick wall after electrical piping work including the cost of all material, cement, labour charges, all leads, lifts, as per standard specification.

Plastering in CM 1:3, 12 mm thick on both sides of brick wall including the cost of all material, cement, labour charges, all leads, lifts etc., as per standard specification.

Ceiling plastering in CM 1:3, 10 mm thick including the cost of all material, cement, labour charges, all leads, lifts as per standard specification. First floor

White washing two coats with approved quality of white cement for ceiling including cost of all materials, labour, leads & lifts and as directed by Engineer at site.

Colour washing two coats using oil bound distember over one coat of white washing with white cement of best quality for inside wall including cost of all materials, labour, curing, all leads & lifts etc., complete, as per standard specification.

Colour washing two coats with exterior emulsion paint of approved quality and colour over one coat of primer for outer wall including cost of all materials, labour, all leads & lifts etc., complete.

Exterior Wall Waterproof cum Decorative Coating Providing and Applying high build exterior waterproof coating for external wall, parapet & Chajja, which is single component, cold applied, Reactive Acrylate copolymer technology. Apply one base coat of universal elastomeric exterior waterproof coating @0.25L/m2 and 2nd coat with Acrylic emultion top coat which can be tinted to any colour @ 0.17L/m2, including 2 coats DFT will be min. 170 microns, The material having followed technical properties: Attains hairline crack bridging up to 2 mm as per EN 1062 part 7, Elongation of >100 % as per ASTMD 412; Tensile strength 2.50 Mpa per ASTM D 412, including priming the surface with 1 coat of Efflorescence resistant penetrating primer dilute with water in the ratio 2:1 spreading at the rate of 0.125 l/m2 in the SSD condition. The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification.

Dadooing walls with glazed tiles 300mmx200 mmx6mm of approved colour and make quality of ISI mark, laid in CM 1:2, 10mm thick and pointing with white cement using 0.30kg/m2 including finishing the joint and pointing flush with tile surface including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete as per standard specification.

Supplying and laying of Double charged Vitrified floor tiles of size 600x600x8 mm of approved quality and colour laid in CM. 1:3 , 20 mm thick and pointing with white cement using 0.40Kg./m2 including finishing joint and pointing Flush with tiles surface including cost of cement, all materials,labour,curing, leads and lifts etc., complete.

Supplying and laying of anti skit ceramic tiles of approved size and design of approved quality and colour laid in CM. 1:3 , 20 mm thick and pointing with white cement using 0.30Kg./m2 including finishing joint and pointing Flush with tiles surface including cost of cement, all materials,labour,curing, leads and lifts etc., complete.

Plastering with CM 1:3, 20 mm thick including cost of cement, labour, curing, all leads and lifts etc., complete as per standard specification.

Supplying and fixing of Doors (Double leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Iron anodized fittings, including Painting two coats ready mixed enamel paint with one coat of primer approved quality and colour, cost of all materials, leads, lifts labour, etc., complete as per standard specification.

Supplying and fixing of Doors (single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Iron anodized fittings, including Painting two coats ready mixed enamel paint with one coat of primer approved quality and colour, cost of all materials, leads, lifts labour, etc., complete as per standard specification.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with overall the edges of frame and shutter the shutter will beprovided with Espag multi power point locks and also it operates as handle.The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong lockingsystems and as per size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window sho

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size of outer frame 60mmx58mm and shutter profile size of 60 x78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm.The EPDM rubber (black colour) covered with allover the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers.The ventilator should be fixed to the wall with 100% packing with screws and silicon packing allround the frames.The ventilator should be got approved before use on work

Supplying and fixing in position white/ Colour glazed model floor Mounted European water closet of best quality and approved make with 100mm 'P' or 'S' trapconnecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing , spun yarn, teak wood plug, brass screw, etc., including supply and fixing 10 litre capacity PVC/ 12.5 litres capacity porcelin low level flushing tank with pair of CI brackets, etc., complete with all fittings, such as 15mm brass ball valve with polythene flot with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as 15mm brass connections, 15mm nylon connection, TW plugs, screws and also giving necessary connections to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re- doing the dismantled masonry to original condition, including cost of all materials, labour, lead, lift, etc., complete, complying with standard specifications. ( The EWC and flushing tank with all accessories should be got approved by the site Engineer before use on works)

Supplying and fixing glazed earthen ware without pedastal Hand wash basin of size 550x400mm reputed make with cast iron brackets, 32mm CP waste coupling rubber plugged chain 15mm GM wheel valve, Nylon hose connection, materials, lead, lift, transporting, labour charges etc., complete as per standard specification.

uld be got approved before use on work

Supplying and fixing best quality of mirror of size 600x450mm mirror with SS soap tray, 600 mm SS towel rod, screw and fixing near the wash basin teak wood round block including cost of all materials, labour, lead, lift, etc., complete.

Providing PVC down fall rain water pipe of 110 mm dia of 4 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete.

Supplying, fixing, laying and testing of 25mm Dia UPVC pipe pressure of approved good Quality ISI make for distribution of water supply including cost of pipe, GI specials, all materials, lead, lift, etc., complete as per standard specification.

Supplying, fixing, laying and testing of 40mm Dia UPVC pipe pressure of approved good Quality ISI make for distribution of water supply in rooms including cost of pipe, GI specials, all materials, lead, lift, etc., complete as per standard specification.

Supplying and fixing locking arrangements with lock 6 levers with 3 keys Godrej Navthal or any other approved good quality lock of reputed make including cost of all materials, labour, lead, lift, etc complete., as per standard specification.

Supplying and fixing cuddapah slab polished both sides for Cup-Board 20mm thick including cost of all materials, leads and lifts and fixing in position, including one coat of black paint in both side, etc., complete as per standard specification.

Providing fixing 15mm PVC heavy duty type screw down bib cock water supply tap including cost of pipe and labour fixing charges lead, lift, as per standard specification etc. complete.

Providing and fixing ventilating shaft of PVC pipe 110 mm dia of 6 kg /cm2 ISI make including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete.

Supplying and fixing 110 mm dia PVC Tee including cost of bend, Elbow and shoe, including cost of all materials, labour, lead, lift, as per standard specification etc., complete.

Providing sewage line with 110mm dia PVC pipe 6kg/cm2 of ISI certified including all specials and cost of all material, lead, lift, etc., complete as per standard specification.

Providing cast iron man hole cover of size 0.60x0.60m for inlet, outlet and man hole of heavy duty including cost all materials, labour, all leads and lifts etc., complete as per standard specification.

Wiring with 2x1.50 sq.mm.PVC unsheathed SC copper cable of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories and with T.W suitable box on wall, covered with hylem sheet of 3mm thick with painting of suitable colour continuous earth wire connection of 14 SWG TC. wire for concealed PVC light and fan point.

Wiring with 2x1.50 sq.mm.PVC unsheathed SC copper conductor of 1100V. Grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in with 150mm x100mm x113mm T.W switch box with 3mm thick Hylem sheet cover for 5A 3pin non inter locking CS plug with continuous earth wire connection of 14SWG TC wire for concealed PVC plug point.

Supply and fixing of 4' 18W LED 3000k flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting.

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stoped electronic 300w regulater with 300mm down rod on the existing clamp.

Supply and fixing of CFL bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for incandescent lamp with guard and 11 W CFLbulb.

Supplying and fixing of ISI make 4 way triple pole and natural MCB Distn Board with 1No. 32 Amps DPIC switch of 500V as incoming 6 Nos.32 Amps SPMCB outgoing necessary hug with wall and making good of concealed portion with PWD earthing etc., complete as per standard specification.

Providing Cup-board Shutter with frame using termite /water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved before use on work.

Polishing two coat of cub board frame wood work for Touch wood polish with one coat of primer polish of approved colour including cost of all materials, lead, lift ,labour charges etc., complete.

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only