Loading
Loading…
Loading…
Tender Value
₹62.3 L
EMD Value
₹1.2 L
Closing Date
9 Jul 2024, 10:30 pmClosed
Rural Drinking Water and Sanitation Department
Chayamani
8884218615
Providing FHTCs to150 Households in Kunduru & kundur kalasapura habitation of kundur village in yeliyur G.P of Kunigal Taluk in Tumkur district by Augmentation & Retrofitting through SVS
RWSSD/2024-25/WS/WORK_INDENT8162
RWSSD/2024-25/WS/WORK_INDENT8162
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
RWSSD Division Office Tumkur
14 documents required · 14 mandatory
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Satisfactorily Completed as prime contractor at least One similar work to an extent of 50 percentage of Amount Put to Tender value not less than Rs 31.16 lakhs
Achieved in at least Two financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs. 124.64 Lakhs. usually not less than two times the Amount Put to Tender
Liquid assets and or availability of credit facilities of not less than Rs 18.70 Lakhs through submission of unconditional Credit line letter of credit/ certificates from banks for meeting the fund requirement etc
₹1,560
₹1.2 L
30 Jun 2024
30 Jun 2024
10 Jul 2024
8 Jul 2024
4 Jul 2024
Providing FHTCs to150 Households in Kunduru & kundur kalasapura habitation of kundur village in yeliyur G.P of Kunigal Taluk in Tumkur district by Augmentation & Retrofitting through SVS
Cutting of road surface for pipeline trenches and disposing of the excavated stuff as directed including barricading, danger lighting etc. in the following classification. [V -5, SR 2021-22 Chapter No...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
Supplying HDPE pipes conforming to IS 4984:1995 with latest amendments and conveying to work site including loading and unloading at both destination and rolling, lowering into trenches, laying true t...
ELECTRO FUSION COUPLER [BWSSB-V SR 2021-22 Page no 3 ] 63 mm
ELECTRO FUSION COUPLER [BWSSB-V SR 2021-22 Page no 3 ] 75 mm
ELECTRO FUSION TEE [BWSSB-V SR 2021-22 Page no 3 ] 63mm
ELECTRO FUSION TEE [BWSSB-V SR 2021-22 Page no 3 ] 75mm
ELECTRO FUSION TEE [BWSSB-V SR 2021-22 Page no 3 ] 90 mm
ELECTRO FUSION ELBOW [BWSSB-V SR 2021-22 Page no 3 ] 63mm
ELECTRO FUSION ELBOW [BWSSB-V SR 2021-22 Page no 3 ] 75mm
ELECTRO FUSION REDUCER [BWSSB-V SR 2021-22 Page no 4] 90 x 75 mm
ELECTRO FUSION REDUCER [BWSSB-V SR 2021-22 Page no 4] 75 x 63 mm
Supplying of Electro fusion End Cap with pipe of 0.2 m length[BWSSB-V SR2021-22 Page no 4] 63mm dia
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments [BWSSB-V SR 2021-22 Chapter No: 15 Item No: 27.3,Pg No-162]
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge...
Supplying and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, desi...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Supply and delivery of Woltman model with removal mechanism water meters confirming to ISO 4064 part I,II,III class B or IS 779 and IS 2373 with life cycle test certificate from FCRI/ NABL accredited ...
Cutting road surface for pipeline, trenches and disposing of the excavated stuff directed Including barricading danger, lightning, etc. In the classification for , Cutting cement concrete road surface...
Cutting in Asphalt Road Surface to demarcate the trench width of the surface [CSR VOL V 2021-22 Chapter No:2 SOR code A105B, Page No-63 ]
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Providing & fixing electro fusion saddle comply with Bs EN12201 -3:2011, PN-12.5 rating and food grade raw material as per BS 6920 with material of construction PE 80 or PE 100 and colour of fitting -...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply...
Flow control Valve 5LPM/10LPM/15LPM: Providing & fixing Flow control Valve using food grade materials SS 316 ball/1/2*[15mm including cost of all materials,labour charges HOM & Testing completes as pe...
Supplying and fixing Multijet class B inferential type, AMR compatible water meters with IP 68 protection totalizer confoming to IS 779 with its latest amendments of following size to service connecti...
Supply and fixing of HDPE water meter box with locking arrangement to protect the water meter of Class ‘B’ Multijet type of size 15 to 32 mm including HDPE box with base dia 300mm x lid dia 200mm ...
Supply of PPR Female Threated Coupling conforming to IS 15801-2008 and DIN Standard 8077/8092 (B191B)2nd addendum vide Ref 222 CE Office,BWSSB 2022-23 Dt:07/06/2022
Supply of PPR End cap conforming ro IS 15801-2008 and DIN Standard 8077/8092 (B181B)2nd addendum vide Ref 222 CE Office,BWSSB 2022-23 Dt:07/06/2022
Supply of PPR Union conforming to IS 15801-2008 and DIN Standard 8077/8092 (B184A) 2nd addendum vide Ref 222 CE Office,BWSSB 2022-23 Dt:07/06/2022
Supply of PPR Gate Valve conforming to IS 15801-2008 and DIN Standard 8077/8092 (B196A) 2nd addendum vide Ref 222 CE Office,BWSSB 2022-23 Dt:07/06/2022
Providing and fixing brass bib cock of approved quality [CSR VOL II 2021-22 ,Item No: 13.2.2,Page No- 115 ]
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...
Supply and fixing of RCC demarcation stones of 30cms x 15cms and 90cms using 1:2:4 CC and 6mm dia rods for verticals and stirrups and rendered smooth,including engraving letters "KWD and ARROW" 6mm de...
Supplying at site pot rest slab of 0.45m x 0.3m x 0.2m in CC 1:2:4 proportion with granite metal 20mm and down size including plank centering and form work,machine mixing,tamping including plastering ...
Wall painting with acrylic, emulsion, paint of approved brand and manufacture to give in even shade Two coats on new work after thoroughly brooming the surface to remove all dirt,dust, drops and forei...
Providing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to gie an even shade
Earth work excavation by manual means for drains,canals, waste weir,draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and tec...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for columns, braces and ring beam above ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per re...
Providing and laying in position Reinforced cement concrete for shell portion, bottom dome / slab and ribs over the staging. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregat...
Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level. The granite/ trap/basalt crushed graded coarse aggregates and fine agg...
Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...
Labour charges for fabricating mild steel or torsteel bars of all sizes for reinforcement for RCC works including conveying steel to work spot with all lead including cleaning, straightening, bending,...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Ladder inside the container: Providing anodized aluminium ladder using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x 25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an ornam...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick, 0.23 M width with copper floats indicators and flexible nylone wires, painting figures with approved enamel pai...
Supplying and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Supplying, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...
Providing 80 mm dia Bell mouthed pipes (flanged) confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any cost of all materials, labour charges etc. complete. (RDW&S SR 2019-20 Ch. No...
Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Double Socket Duck Foot DI Bends:[WS&UW CSR 2021-22, Vol :V, Chapter No: 8, Item No:24.1, SOR CODE:H260A]
Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS 1865 and of grade GGG 40/50, shaft of stainless steel, wedge ...
Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc. before removal of scaffolding for new R...
Providing plastering in CM 1:3 proportion for RCC over head tanks,including smooth finishing,minimum 2% of approved quality water proofingcompound, curing, scaffolding and giving satisfactory water pr...
Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...
Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. (“ii) English and Roman [PWD & SRB 2...
Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding, aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm ...
Supplying and fixing 40mm dia. GI pipe medium duty pipes hand railing 3 rows fixed to RCC 1:2:4 vibrated post of 150x150mm at bottom and 100x150mm at top, placed at 2 Mtrs. intervals for a height of 7...
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments.[WS&UW CSR 2021-22, Vol-V,Chapter No: 15, Item No: 27.3, SOR code P250C]
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...
Providing 80mm dia air valve conforming to IS 1538 (Part-1 to 22) 1978 with latest amendments
75 MM ELECTRO FUSION COUPLER CSR-2021-22 Vol-V Page No.3 Item No 95
75 MM ELECTRO FUSION ELBOW CSR-2021-22 Vol-V Page No.3 Item No 97
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
TENDER NOTIFICATION 05 KUNIGAL MADHUGIRI KORATAGERE FINAL.pdf
Others - tender notification copy • 4.86 MB
8162 KW 3.docx
Tender Document • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].