32(W)/EDCH/2025-26

Amount

Carriage of all petty material of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Carriage of following material from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

PCC Pole 8.5 mtr

PCC Pole 11.00 mtr

ST Pole 11.00 mtr

33 KV CT/PT

33 KV VCB complete

Battery Charger Set

33 kv Fuse set complete

11&33 KV XLPE Cable

33 KV Isolator complete

Dog Conductor

Rabbit Conductor

Erection & Fixing of following pole in 11 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.

(a) PCC Pole 8.5 mtr. Long

(b) PCC Pole 11 mtr. Long

(c) ST Pole 11/13 mtr. Long

Erection & Fixing of 11 Mtr. PCC pole in 33 KV line after digging of suitable pits including fixing of requisite all accessories as per RESPO Drawing/Norms by providing F-Bracket and holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts., as per direction of site incharge.

Erection & Fixing of PCC Pole 8.5 mtr. long in LT. line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing L.T. Pin Clamps, M.S. Flat of size 50x6 & Schacle Insulator of size 75x90mm, with proper size nuts and bolts, as per direction of site incharge.

Laying of 200mm O/D PN-4PE-80 PN-4 grade UV stabilized HDPE pipe as per IS of 6meter, for laying of underground Cable as per RESPO/Norms, including cost of above HDPE pipe, as per direction of site incharge.

Laying of 33KV XLPE Cable 3x300sq.mm overhead and completion work properly, as per RESPO/Norms, and as per direction of site incharge. Work include all clamps, Nut bolt for safe hanging of cable

Laying of 11KV XLPE Cable 3x120/3x185sq.mm overhead and completion work properly, as per RESPO/Norms, and as per direction of site incharge. Work include all clamps, Nut bolt for safe hanging of cable

Making and filling of 33&11KV Cable Jointing Kit, Indoor/outdoor type, after duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of lugs and tape etc., as per RESPO Norms, and as per direction of site incharge.

Making filling of 33 KV streight thru cable box properly work includes digging pit making joint and refilling the earth and some as before (only cable box will be provided by department)

Eraction, fixing and commissing of 33 KV VCB in 33/11 KV Substation properly for safe opration (only VCB will be provided by Department)

Supply and Laying of copper control cable 2x2.5Sq.mm as per RESPO/Norms and as per site incharge.

Fixing and commissing of 24 volt battery charger and Battery set with all connections. As per RESPO/Norms and as per site incharge. Necessary clamp, lug with nut bolt will be provided by contractor.

Eraction, fixing and commissing of 33 KV outdoor CT in different 33/11 KV Substation Switchyard for proper opration. All necessary clamp, Nut bolt, connector will be provided by department

Eraction, fixing and commissing of 33 KV outdoor PT in different 33/11 KV Substation Switchyard for proper opration. All necessary clamp, Nut bolt, connector will be provided by department

Eraction, fixing and commissing of 33 KV isolator in different 33/11 KV Substation Switchyard for proper opration. All necessary clamp, Nut bolt, connector will be provided by department

Eraction, fixing and commissing of 33 KV LA in different 33/11 KV Substation Switchyard for proper opration. All necessary clamp, Nut bolt, connector will be provided by department

Eraction, fixing and commissing of 33 KV Fuse Set in different 33/11 KV Substation Switchyard for proper opration. All necessary clamp, Nut bolt, connector will be provided by department

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops, as per direction of site incharge.

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge.

Grouting of following ST/PCC supports in CC 1:3:6 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge.

PCC Pole 8.5 mtr. Long

ST/PCC Pole 11 mtr. Long

Wrapping of barbed wire on 11KV ST/PCC poles as anti-climbing device for a length of 0.9mtrs. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a hieght of 2.75 mtr from the ground complete, including providing & fixing of lower end & upper end clamps made of M.S. Flat 40X5mm complete with nuts & bolts and all other required material and T&P., as per direction of site incharge.

Laying , Stringing and final sagging of ACSR Weasel Conductor, as per RESPO/ Drawing Norms and as per direction of site incharge.

Laying , Stringing and final sagging of ACSR Dog Conductor, as per RESPO/ Drawing Norms and as per direction of site incharge.

Laying , Stringing and final sagging of Rabbit Conductor, as per RESPO/ Drawing Norms and as per direction of site incharge.

Providing & Fixing of G.I. pipe 6"dia Class-B over 11KV/33 KV XLPE cable before mounting the cable at double pole. The work includes fitting of clamps, sealing of top and bottom of pipe and one end of pipe is to be burried under earth about 500mm earch including mounting and clamping the cable on double pole structure and making connection with overhead line at both ends, as per direction of site incharge.

Laying & 33 KV XLPE Cable 3x300Sq.mm. in tranch by digging of trends as per RESPO/Norms. After laying of cable the tranch will be refill and restore the land as before.

Laying of 33 KV XLPE cable 3x300Sq.mm. underground in HDPE pipe by manual and drill method.

Safely dismantling work properly and carriage of old & used STP pole & other material from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Safely dismantling/removal and carriage of old & used ACSR Conductor from site of work to Electricity store center, Hapur with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge.

Jumpering of cable after filling of cable box All nut bolt, clamp, etc. provided by contractor

C B S ENTERPRISES (BID ID -5538310)

M/S YASH TRADERS HAPUR (BID ID -5542910)