Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.0 LAccepted-AOC BALSUA P O JHAKOLARI PATHANKOT PATHANKOT PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹40.6 L+₹2.1 L (5.58%)Rejected-AOC BHANDARI NIWAS BHARAT NAGAR TEH DISTT PATHANKOT PIN 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹41.3 L+₹2.8 L (7.35%)Rejected-AOC H NO B III 95 MOHALLA GHARTHOLI MISSION ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹42.3 L+₹3.8 L (9.81%)Rejected-AOC 451 NEAR RADHA KRISHAN MANDIR VPO MAMUN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-AOC Rejected | |
| 5 | L5₹42.3 L+₹3.8 L (9.89%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Enginneer(N) Mamun
Garrison Enginneer(N) Mamun
ANNUAL COMPREHENSIVE MAINTENANCE TO OTM ACCN AT ZONE D-V UNDER AGE B/R-II OF GE (N) MAMUN
2022_MES_553468_1
GE(N)/M-24/2022-23
Open Tender
Civil Works
Item Rate
180 days
Garrison Enginneer(N) Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Enginneer(N) Mamun
₹90,000
28 Nov 2022
21 Sept 2022
19 Oct 2022
21 Sept 2022
17 Oct 2022
5 Oct 2022
Amount
Taking down chowkhats of frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as spd.
All as per Srl Item No 1 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm(without taking off shutters from the frames) all as spd.
Taking down shutters of any description n exc 1 Sqm each including removing to or from store complete.
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each incl removing to or from store complete.
S&F 2nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc ( divided into squares with plain chamfered or rounded , mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified & directed.
S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood rail and style and two panel with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated all as specified.
S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick (Stile) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face all as specified and directed .
S&F Soild PVC door frame wood grain color coated of size 50mm x 95mm made out of 5mm wood grain colour PVC sheet reinforced with MS Sqaure tube , supply and fixing in opening as per specification & drawing
Pressed steel frames 125mmx60mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends incl 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface, etc complete all as specified and directed.
Pressed steel frames 105mmx60mm for door, made out of 1.25 mm thick MS sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc and back filling for chowkats in PCC (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) tarring ends incl 02 coats of synthetic enamel paint over a coat of red oxide primer on exposed surface, etc complete all as specified and directed.
S&F Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed ot welded incl 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to F I frame work , incl other fittings ,hinges ,handles tarred hold fasts PCC blocks including two coats of synthetic enamel paint over a coat of primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as spd.
S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.
Preparation of new or previously untreated Steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer on exposed surface, etc complete all as specified and directed.
M & L preparation of wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F Mild steel sliding door bolts (ISI Marked) 250mm long, plate type, stove enameled black, with bright bolt not less than 12mm dia with & incl a minimum of 6 bolts & nuts, four on bolt plates and two on staple plate all as specified and directed
S&F in repair Mild steel barrel tower bolts stove enameled black with bright bolts of length 150mm all as spd ISI Marked
S&F in repair Mild steel sliding door bolts (ISI Marked) 250mm long, plate type, stove enameled black, with bright bolt not less than 12mm dia with & incl a minimum of 6 bolts & nuts, four on bolt plates and two on staple plate all as specified and directed
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane including hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads all as specified and directed.
S&F in repair Stainless steel wire cloth 0.34mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanized wire staple, etc complete all as specified and directed.
S&F Stainless steel wire cloth 0.34mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanized wire staple, etc complete all as specified and directed.
Taking down cement plaster on brick walls or stone w alls any descrition etc including raking out joingts, hacking for key, scrubbing down with water etc all as specified and directed.
M&L Rendering 10mm thick cement plaster on faces of brick work , concrete or fair faces surfaces in cement mortar (1:6) finished even and fair without using extra cement all as specified and directed.
Rendering 15mm thick in two layers (base layer 10mm & finishing layer 5mm thick) in cement mortar (1:4) using liquid water proofing compound in finishing layer on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement, etc complete all as specified & directed. (Note : WPC shall be measured and paid separately)
M&L for 10mm thick cement plaster in CM 1:3 on concrete surface of ceiling,, chajja etc finishing the surfaces even and smooth without using extra cement all as specified.
Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.
Supply only liquid water proofing compound
M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plaster in CM 1:4 and dismantling existing surface complete all as specified and directed
M&L for vitrified tiles light shade10 mm thick ( Square or rectangular) polished, area of each tile n. exce 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) including dismantling existing surface all as spd and directed
M&L for vitrified tiles light shade 10 mm thick ( Square or rectangular) polished, area of each tile n. exc 0.36 sqm in daddo, skirting and like that set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 10mm thick screed bed in CM (1:4) including dismantling existing surface all as spd and directed
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) including dismantling existing surface all as spd and directed
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in daddo, skirting and like that set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 10mm thick plaster in CM (1:4) including dismantling existing surface all as spd and directed
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) including dismantling existing surface all as spd and directed
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in dado, skirting and like that set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 10mm thick plaster in CM (1:4) including dismantling existing surface all as spd and directed
M&L three coats of white wash on newly plastered surface of walls including preparation of surfaces all as specified and directed.
Preparation of newly plastered surfaces of wall and apply two coats of distemper oil emulsion (OBD) over a coat of cement wall primer (from same manufacturer of OBD) over a layer of wall care putty not less than 2mm thick etc complete all as specified and directed.
Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint incl curing complete all as specified & directed.
M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd and directed.
Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.
Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed.
S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.
Fixing only the 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling etc all as specified.
S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.
Fixing only the 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling etc all as specified.
S&F Ball valve high pressure of PTMT with epoxy coated alum rod & high density plastic ball screwed for 20mm bore iron pipe and fixed (minimum weight 20mm -210 gms) fixed complete all as specified and directed.
S&F in repair Bib taps cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair angle valve / stop valve cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.
All as per Srl Item No 48 here-in-before, but two-in-one type angle valve complete all as specified and directed.
S&F in repair concealed type angle valve / stop valve cast copper chromium plated fancy type alloy with long shank and cup ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed complete all as specified and directed
S & F in repairs Vitreous china wash hand basin, white flat back,size 550 x 400 mm including waste pipe , brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia waste pipe all as spd and directed
S & F in repair pillar tap 15 mm bore cast copper chromium plated screwed down, high pressure screwed for iron pipe complete all specified and directed
S & F PVC shelf of PTMT fixed with and incl chromium plated brass screws and wooden and plastic cleats ( min wt 300 gms)
S&F in repair grating 100 mm dia of PTMT. (Minimium weight 25gms)complete all as spd & directed .
S&F for 18 to 20 mm thick PVC prelaminated solid board with one side decorative choice laminate and other side balancing white and with weight of sheet not less than 9kg per sqm as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed.
S & F Continuous (piano) hinges width of flap is 30 mm, mild steel, bright finish or electrogalvanised all as specified and as directed.
S&F in repair Magnetic catcher for shutter of approved pattern fitted with suitable screws complete all as specified and directed.
S & F in repairs PVC waste pipe 32 mm dia for wash hand basin and urinal
S & F in repair PVC connection 15 mm size with PTMT nuts or length 450 mm.
S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed.
S&F in repair vitreous china, squatting from Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including provision of lean concrete bedding connection to drain out pipe and to flush pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required all as specified.
S&F Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe incl plasticseat and cover ( As directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed.
Taking down brick tiles,terracing tiles, single layer from roof laid, bedded and pointed in any mortar all as specified & directed.
Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.
M&L for 40mm thick brick tiles laid on cement mortar & joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement over and including 15mm thick screed bed or bedding layer of mortar in CM 1:6 etc complete all as directed.
All as per item 65 above but except brick tile using serviceable brick tile retrieved from item above complete all as specified
M&L PCC 1:2:4 type B-0 padding, surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and as directed.
APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.
M&L APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.
Rotational moulded polyethylene water storage tanks three layer of capacity 500 litre, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball etc complete including taking out existing water tanks of any description all as specified & directed. Note: Marking of CA No with synthetic enamel paint using stensil shall be carried out by Contractor without any extra cost. Size of letter/ alphabet is decided and directed by Engr-in-Charge.
Rotational moulded polyethylene water storage tanks three layer of capacity 1000 litre, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball etc complete including taking out existing water tanks of any description all as specified & directed. Note: Marking of CA No with synthetic enamel paint using stensil shall be carried out by Contractor without any extra cost. Size of letter/ alphabet is decided and directed by Engr-in-Charge.
S&F in repair towel rail CP 600 mm long complete all as specified and directed.
S&F in repair over head shower 125mm size for 15mm bore pipe, cast copper alloy chromium plated fixed in repairs of Make - Jaquar , Marc and Johnson complete all as spd and directed.
S&F in repair 20mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC powder coated brackets, funnels etc suitable for single curtain rod, fixed in repair, etc complete all as specified and approved by GE.
Providing and fixing Eco 3000 Series Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/Sq. Mtr.) with total coated thickness of 0.60 mm. Paint Specifications: Coated Sections should be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Dimensions of Sections: Section for frame should be 48mm x 50mm, Section for Mullion should be of 48mm x 50mm, Section for Glazed Shutter Frame should be of 47mm x 20mm, and Section for Fixed Glass Bead should be of 12mm x 12mm.Fixing Details: Frame and Shutter Frame Sections should be cut to length and metre joined with Polypropylene Corner Brackets. Mullion Section should be joined with Frame/Mullion using Nylon Mullion Cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in all as specified and as directed. Make: M/s NCL/ M/s Aswani & Sons/ M/s Ashish Industries
S&F powder coated anodised aliminium frame for doors, windows, ventilators (including grills) with one or more rebates including joining cleats for fixing etc complete all as specified and directed.
S&F powder coated anodised aliminum widnow and ventilators shutters, side hung type without sash bars, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing anodised aliminium snap beading screws anodised aluminium fitting such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 Nos), tower bolt 100 mm long (01 no) and suitable handles 125 mm long (1 Nos) complete all as specified & directed.
S&F powder coated anodised aluminium doors 100mm x 40 mm x 3.15 mm side & top rail 150 mm x 40 mmx3.15 mm middle & bottom rails of side hung type without sash bars, aluminium sections including necessary joining cleats glazing clips rubber packing anodised aliminium snap beading screws anodised aluminium fitting such as 150mm long (1 Nos), hinges type B-21 100mm long (3 Nos), 2 Nos tower bolt 150 long, suitable aluminium handles 150 mm long (2 Nos), aluminium door stoper complete all as specified & directed.
S & F in repairs for Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and fixed complete all as specified and directed
S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing
S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
M&L Granite ( As directed) work 12-15mm thick (table rubbed and polished) in steps, jambs, pillars, steps, window cills,cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of granite including demolition of the same all as specified.
S&F in repairs stainless steel kitchen plate rack of size 750 x 900 mm of approved make fixed with mild steel screw complete all as spd & directed.
S&F in repairs 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)
Extra over for 100 mm dia CI fitting with oval access door
Extra over for 75mm dia CI fitting with oval access door
S&F CI floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating all as specified.
S&F Cast iron waste and vent pipes sand cast 100mm dia bore in any length with or without ears with cement joints fixed to walls with all fittings includign taking down the unservicable pipe with fitting complete all as spd and directed
S&F Cast iron waste and vent pipes sand cast 75mm dia bore in any length with or without ears with cement joints fixed to walls with all fittings includign taking down the unservicable pipe with fitting complete all as spd and directed
CI branch pipece single of 100mm bore or with parallel branches all as spd and directed
CI branch piece single of 75mm bore or with parallel branches all as spd and directed
S&F sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as spd & directed.
Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified
10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed(WPC shall be measured and paid separately)
M & L for bitumen blown any grade, applied hot, two coats, to concrete/plastered surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.
M & L for 25mm thick P. C.C type B-0, 1:2:4 ( using 12.5mm graded aggregate) as in sub floors for laying floor finish in sunken floorcomplete all as specified and directed.
M & L Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in sunken floors and all as specified and directed.
Deduct Total amount of SCHEDUL 'A' SECTION-II (SCH OF CREDIT) Rs 44,575.00 ( to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.
M/s GIrdhari Lal Rakesh Kumar
M/S HIMANSHU BUILDERS
RD Engineers
Alishan Builders
M C ENTERPRISES
M/s Rajeev Vashist
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .