SPECIAL REPAIRS TO HT UG CABLE POLE STRUCTURE GANG OPERATING DEVICE (GOD) AND OTHER CONNECTED ITEMS AT CME

Amount

Dismantling of old unsv ACSR/AAC conductors of any type and size and setting aside for credit to contractor complete all as specified and directed by Engr-in-charge

Dismantling and removing and setting aside for credit to contractor steel tubular pole any type/size by breaking PCC foundation after disconnecting electrical connection incl site clearance complete all as specified and directed by Engr-in- Charge.

Dismantling insulators any type any size complete all as specified and directed by Engr-in-charge

Dismantling cross-arms of M.S. channel or angle sections etc complete and setting aside for credit to contractor complete all as specified and directed by Engr-in-charge

S & F steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-55 (11.0 metres long) complete all as specified and directed by Engr-in-charge

M&L cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers welding, bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat and one finishing coat of silver paint all as directed by Engr-in-Charge.

Supply, laying, connecting and testing XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor for 11000 volts working voltage cross sectional area 3 core, 95 sqmm including taking down old unsv cable. complete all as specified and directed by Engr-in-charge

Supply,laying, connecting and testing XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor for 11000 volts working voltage cross sectional area 3 core, 150 sqmm including taking down old unsv cable. complete all as specified and directed by Engr-in-charge

Supply, laying and testing in reapir XLPE insulated screened PVC bedded, galvanised steel strip/ wire armoured, electric power cables (Heavy Duty) with stranded Aluminium conductor, 22000 V grade of size 3 core 300 Sqmm including taking down old unsv cable. complete all as specified and directed by Engr-in-charge

Supply, laying, connecting and testing cable XLPE insulated screened PVC bedded galvanised steel wire armoured, electric power cables(heavy duty) with stranded aluminium conductor, 22000V grade of size 3 core 150 sqm including taking down old unsv cable complete all as specified and directed by Engr-in-charge

S&F in repair cable jointing kit for 11 KV (earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm

S&F in repair cable jointing kit for 11 KV (earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 150 sqmm complete all as specified and directed by Engr-in-charge

S&F in repair cable jointing kit for 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed by Engr-in-charge

S&F in repair cable end termination, outdoor, heat shrinkable type joint complete with jointing material and accessories suitable for 22 KV, 3 core 120 to 185 sqmm, XLPE armoured aluminium conductor cable complete all as specified and directed.

S&F cable end termination, outdoor, heat shrinkable type joint complete with jointing material and accessories suitable for 22 KV, 3 core, 300 Sqmm, XLPE armoured aluminium conductor cable complete all as specified and directed by Engr-in-charge

S&F cable end termination, indoor, heat shrinkable type joint complete with jointing material and accessories suitable for 22 KV, 3 core, 300 Sqmm, XLPE armoured aluminium conductor cable complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in following :-

(a) Soft /Loose Soil

(b) Hard/Dense soil

Returning filling in including spreading levelling watering and well ramming in n.exc. 25 thick in soil complete all as specified and directed by Engr-in-charge

Removing the excavated material ( soil ) n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed by Engr-in-charge

Supply & spread, dry river sand for cushioning of cables laid in trenches all as specified in SSR Part -I and complete all as specified and directed by Engr-in-charge

Supply and laying unreinforced precast concrete cable cover, class HV, Type I flat of size 300mm x 180mm x40mm complete all as specified and directed by Engr-in-charge

S&F GI tubing light grade 100 mm dia with all fittings for protection of cable laid in trenches or fixing to pole , wall with suitable size of FI clamp including taking down old unsv one complete all as specified and directed by Engr-in-charge

S&F disc type, porcelain vitreous 145 mm high and 255 mm dia ball and socket type white, brown or green insulator single disc assembly for conductors working pressure 11 KV grade complete all as specified and directed by Engr-in-charge

S&F disc Type, Porcelain, vitreous, white, brown green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts for 22 KV complete all as specified and directed by Engr-in-charge

S&F pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, for 22KV grade complete all as specified and directed by Engr-in-charge

S&F in repair expulsion fuse unit single pole mounted on insulator & steel frame complete with fused barrel (drop out fuse) suitable for 11 KV for current rating upto 50 Amp complete all as specified and directed by Engr-in-charge

S&F in repair gang operated air Brake switch triple pole mechanically operated mounted on insulator & steel frame with operating mechanisam worked from ground level suitable for 11 KV for current rating upto 200 Amp of approved make with and including operating rod, GI tubing 25mm dia medium grade single piece of suitable length and insulated handle complete all as specifed by Engineer-in-Charge. Note : AB switch shall consist of three insulators per phase and 9 isolators in all.

S&F in repair lightning arresters expulsion type complete with all fittings transmission class discharge capacity 10 Kilo Amp suitable for 22KV complete all as specified and directed.

S&F in repair HT 22 KV outdoor type dropout fuses double stack channel type complete with insulator of rating up to 200 Amps complete all as specified and directed.

S&F in repair gang operated air brake switch triple pole mechanically operated mounted on insulator & steel frame with operating mechanisam worked from ground level suitable for 22 KV for current rating upto 400 Amp of approved make with and including operating rod, GI tubing 25mm dia medium grade single piece of suitable length and insulated handle complete all as specifed by Engineer-in-Charge. Note : AB switch shall consist of three insulators per phase and 9 isolators in all.

Dismantling and taking out old unsv earthing and material & labour for earthing using copper earth plate electrode of size 60cm X 60cm X 3.15mm thick burried directly in ground vertically at a depth not less than 2.25 mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using copper strip of size 20X3 mm by means of bolts, nuts, check nuts and washers made of GI and protected by light grade 40 mm dia GI pipe for protection of GI pipe including 20mm dia GI pipe for watering GI funnel , PCC earth pit (1:3:6) type C-2 with CI frame and RCC cover all as shown in electrical Plate No 3 on SSR Part-I (2009) including necessay excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr all as specified and directed by Engr-in-charge

Dismantling and taking down old unsv earthing and M&L for earthing complete with galvanized steel plate earth electrode 60cmx60cmx6mm thick buried directly in ground vertically in pit of depth not less than 2.25 mtr below ground level with top edge of the earth plate at depth of not less then 1.5 mtr below ground level surrounded from all sides by char coal dust and common salt in alternate layers of 15 cm depth and earth plate electrode connected to galvanised earth lead strip of size 32 x 6 mm by means of GI nuts bolts, check nuts and washers and connected to earthing test point drawn through40 mm dia GI pipe for protection of GI pipe including 20mm dia GI pipe for watering GI funnel , PCC earth pit (1:3:6) type C-2 with CI frame and RCC cover all as shown in electrical Plate No 3 on SSR Part-I (2009) including necessay excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr as specified and directed by Engr-in-charge

Dismantling and taking down old unsv earthing and M&L for earthing complete with galvanized steel plate earth electrode 60cmx60cmx6mm thick buried directly in ground vertically in pit of depth not less than 2.25 mtr below ground level with top edge of the earth plate at depth of not less than 1.5 mtr below ground level surrounded from all sides by char coal dust and common salt in alternate layers of 15 cm depth and earth plate electrode connected to galvanised earth lead strip of size 25X4.0 mm by means of GI nuts bolts, check nuts and washers and connected to earthing test point drawn through 40 mm dia GI pipe for protection of GI pipe including 20mm dia GI pipe for watering GI funnel , PCC earth pit (1:3:6) type C-2 with CI frame and RCC cover all as shown in electrical Plate No 3 on SSR Part-I (2009) including necessay excavation and earth work disposal of surplus soil to a distance not exceeding 50 mtr as specified and directed by Engr-in-charge

M&L earth continuity conductor or main earthing lead of size 25x4mm galvanised iron strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as specified and directed by Engr-in-charge

M&L earth continuity conductor or main earthing lead of size 32x6mm galvanised iron strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as specified and directed by Engr-in-charge

S&F in repair aluminium conductor, steel reinforced overhead conductors (all sizes) incl copper binding wire etc complete all directed by Engr-in-Charge

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate for foundation of poles complete all as specified and directed by Engr-in-charge

M & L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate for mass filling of poles etc complete all as specified and directed by Engr-in-charge

M&L for cement concrete as in coping including necessary form work type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified and directed by Engr-in-charge

Taking down burnt out jumpers and M&L for new jumper connection not less than 1.5 Mtr long between bus system to GOD and GOD to DO fuse unit with jumper made of 11/22 KV aluminium conductor (11/22 KV) including clamps, crimple, PVC sleeves complete all as specified and directed by Engr-in-charge

Goodluck Enterprises

ONKAR ELECTRIC AND GENERAL STORE

Techmat trading solution

Rama Electricals

Mahindra Electric Stores

M/S. Niksun Electro-Infra Private Limited

SBS Enterprises