REPAIR/RENEWAL OF EXTERNAL PERIODICALS AFTER REMOVAL OF EXISTING TREATMENT FOR BLDG NO P-185, P-186 AND P-193 AT TRV AT ICGAS DAMAN

M&L for preparation of existing serfaces of wall by Complete removal of existing treatment and applying Two coats of 100% Premium acrylic emulsion paint, single component, UV stable, water based water proofing decorative Electromeric coating with anti algea resitance having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old finished surfaces including for 2mm thick exterior grade wall care putty in two layers on wall complete all as specified and directed. Make: Asian Paints (Apex Ultima Protek) / Nerolac (Excel Rain Guard) / Berger (Weather Coat Allguard). Note: The work carried out shall be guaranteed for its effectiveness by both Contractor and applicator for a period of 5 years from the date of completion of the work. The paint work shall be carried out through authorized applicator of the manufcturer only. Contractor shall submit the documentary proof of applicator and get approved from accepting officer. Work shall commence after approval of the Applicator only. The work shall be carried out in stages as under: Stage-1 : Removal of existing treatment by scrubbing the existing surfaces and cleaning the surfaces with water to remove all loose particles Stage-2 : Application of 2mm thick exterior grade wall care putty in two layers Stage-3 : Application of Exterior grade primer as per manufacturers instructions. Stage-4 : Application of exterior emulsion paint in one coat as per manufacturers instructions. Stage-5 : Application of exterior emulsion paint in one coat as per manufacturers instructions. Contractor to proceed to next stage only after the preceding stage is approved by Accepting Officer.

M&L for preparation of old painted steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster of any description from walls including raking out joints, hacking for key, scrubbing down with water etc. and disposing off rubbish materials outside MD land all as directed.

M&L for rendering in CM 1:4, 20 mm thick in two coats (15 mm under coat plus 5mm finishing coat) on brick/concrete surfaces with water proofing compound at the rate of 3% by weight of cement in finishing coat and finishing the surface even and fair. (Note :- WPC will be measured and paid seperately).

Supply only integral waterproofing compound

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size quality or description from wooden/metal frames) glazed with putty or fixed with beads or screws etc complete all as specified and as directed.

S&F float glass 4.8 mm thick and area exc 0.5sqm each pane (cost of jhulla system included) fixed with rubber gaskets in sliding aluminium window shutters or with oil putty in wooden/steel windows etc complete all as specified and as directed.

S & F sheet glass 4 mm thick pin headed /figured glass fixed with rubber gaskets in aluminium ventilators or fixing with oil putty in steel/wooden ventilators in square not exc 0.5 Sqm in each pane (cost of using Jhulla system is included) fixed at any position including all necessary fittings etc complete all as specified and as directed.