Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.8 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹7.3 L+₹59,420.70 (8.80%)Rejected-Finance | L2 | Rejected-Finance Rejected as L2 | |
| 3 | L3₹7.5 L+₹78,384.52 (11.6%)Rejected-Finance SET NO 02 GUSAIN HOUSE LOWER KAITHU SHIMLA 03 H P | SHIMLA | HIMACHAL PRADESH | 171003 | L3 | Rejected-Finance Rejected as L3 | |
| 4 | L4₹7.6 L+₹82,659.83 (12.2%)Rejected-Finance | L4 | Rejected-Finance Rejected as L4 | |
| 5 | L5₹8.9 L+₹2.2 L (32.1%)Rejected-Finance VILLAGE P O HARIPUR SANDHOLI TEHSIL BADDI DISTT SOLAN HP | SOLAN | HIMACHAL PRADESH | 171102 | L5 | Rejected-Finance Rejected as L5 |
Tender Value
₹7.8 L
EMD Value
₹15,636
Closing Date
17 Jan 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DFO Wildlife Shimla
DFO Wildlife Division Shimla Mist Chamber Khilini Shimla
Proposed estimate for the construction of kitchen in RRC Tutikandi under Wildlife Range Kufri and Wildlife Division Shimla
2023_FD_67151_1
02-2023
Open Tender
Civil Works
Item Rate
30 days
construction of kitchen in RRC Tutikandi
As per Tender Document
7 documents required · 7 mandatory
₹500
Yes
DFO Wildlife Shimla
₹15,636
Yes
19 Jan 2023
11 Jan 2023
18 Jan 2023
11 Jan 2023
17 Jan 2023
11 Jan 2023
11 Jan 2023 - 17 Jan 2023
Amount
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :Of sectional area below 40 square centimetres.
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :Up to 10 mm thick
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.:All kinds of soil
Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete.Stone available at work site by earth work
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts
Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders,bressumers and cantilevers.
Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform
Edges of slabs and breaks in floors and shelf :Under 20 cm wide
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand): 3graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, :excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).
Rein-forcement for R.C.C. work I/c bending & binding placing in position complete upto floor two level : Thermo-Mechanically Treated bars of grade Fe-500D or more.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. :Cement mortar1:4(1 cement :4coarse sand)
Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical means.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length. : Sal wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge.:Teak /Deodar wood : 35 mm thick shutters
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : Teak /Deodar wood : 35 mm thick shutters
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. : Fixed to openings /wooden frames with rawl plugs screws etc M.S.flat/bar,angle/ squre iron & round M.S.pipe etc. @15 kg/m2
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. 300X16mm for D shutter
Providing and fixing aluminium tower bolts, ISI marked, anodised, (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm
Fixing of M.S. hooks and eyes.
15 mm cement plaster on rough & fair side of single or half brick wall of mix: 1:4 (1 cement 1: 4 fine sand)
6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. : 40 mm thick with 20 mm nominal size stone aggregate
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
Construction of open surface drain in H.D.C.R. stone masonry 15 x 23cm U shape in cement mortar 1:6 and inside plastering 20cm thick with cement mortar 1:3 i/c earth work and laying 10cm thick cement concrete 1:5:10 and 7.5cm thick cement concrete 1:2:4 i/c 20cm thick cement plaster 1:3 and finished with floating coat of neat cement. Drain around building i/c out let
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
Priming with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture
Distempering with oil bound distemper washable interiar & exteriar weather proof cement paint of approved brand and manufacture to give an even shade:New work (two or more coats) over and including water thinnable priming coat with cement primer 60%
Finishing walls with water proofing cement paint of required shade : 40%
BHUSHAN THAKUR
DALIP SINGH VERMA
SANJEEV SHARMA
kamal kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .