REPAIR / REPLACEMENT OF SANITARY FITTINGS, PLUMBING, ROOFING,FLOORING AND PLASTERING OF CERTAIN BLDGS AT MH AREA AND OTHER OTM ACCN UNDER AGE B/R-I AT GE JHANSI

Amount

Demolition of cement concrete incl terrazo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar, complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L for semi-skid cermaic coloured tiles of size 300 X 300mm, 7 to 8mm thick, as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles colour, laid over and including 15 mm thick screed/ bedding layer in CM (1:6), complete all as specified and directed. Make - Kajaria / Nittco / Jhonson / Somany / Orient

M&L for Jointless Vitrified colour tiles of size 600 x 600mm, 9 to 10mm thick, as in flooring etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles colour, laid over and including 15 mm thick screed/ bedding layer in CM (1:6), complete all as specified and directed. Make - Kajaria / Nittco / Jhonson / Somany / Orient

All as per Srl item No 04, mentioned here-in-above, but in skirting with and including 10mm thick rendering in CM 1:4 on wall, complete all as specified and directed.

M&L for Jointless ceremic colour tiles of size 600 x 600mm, 9 to 10mm thick, as in flooring etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles colour, laid over and including 15 mm thick screed/ bedding layer in CM (1:6), complete all as specified and directed. Make - Kajaria / Nittco / Jhonson / Somany / Orient

All as per Srl item No 06, mentioned here-in-above, but in skirting with and including 10mm thick rendering in CM 1:4 on wall, complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles of size 300 x 450mm, 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles colour with and including 10mm thick rendering in CM 1:4 on wall, complete all as specified and directed. Make - Kajaria / Nittco / Jhonson / Somany / Orient

M&L for 16 - 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including moulding, rubbing & polishing, and laid over and incl 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 18-20 mm thick and laid over and incl 15mm thick screed bed in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab, with and including Cutting / Griding / mirror Polishing on Kota stone as per local trade practice, complete all as specified and directed.

All as per Srl item No 10, mentioned here-in-above, but on vertical surfaces such as skirting/dado over 10mm thick CM rendering in CM 1:4.

M&L for 25mm thich PCC type B0 1:2:4 (using 12.5mm graded aggregate) as in levelling course, complete all as specified and directed.

M&L for factory made PU coated, chequered cement concrete tiles of any colour 30 cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 25mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate), complete all as specified and directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment, made of PVC moulded (or rubber mould) with vibrating system laid over 50 mm thick sand cushion, with and incl CM (1:3) in edges of pavers, complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in coping, surface channels, benchings of manholes, suacer drain, haunching and the like including weathering, slightly rounded or chamfered angles and throating, finished fair and even, with and including neccessary form work, complete all as specified and directed.

M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path, laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

Dismantling of wall and ceiling boards( fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillats, complete all as specified and directed.

S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof/Slab/truss incl wall/perimeter runner/channel of 15 mm size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed. Make : Gyproc / V-Board / Everest

Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for half brick thick wall with fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:4, complete all as specified and directed.

Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10 mm thick rendering in CM (1:4) on other than fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:3) on fair faces of concrete surfaces of ceiling, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying 3 coat of white wash, complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying 3 coat of white wash, complete all as specified and directed.

M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping, watering and applying two coats of oil bound distemper over and incl one layer of Birla/JK White wall care putty to get level and smooth surface on old plastered surface of internal wall, complete all as specified and as directed.

M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.

M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of white wash, complete all as specified and directed.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of distemper oil bound white or any tinted complete all as specified and directed.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of walls and applying applying one coat of cement based paint, complete all as specified and directed.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of white wash (lime) on walls surface, complete all as specified and directed.

M&L for preparation of surface by washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of white wash (lime) on ceiling surface, complete all as specified and directed.

M&L for writing or repainting letters or figures (Block, Roman, Italic, Indian) exc 15.0 cm but not exc 30 cm in height and line of letters or figures not exc 2.0 cm wide for Bldg No / Name and similar works etc with two coat of synthetic enamel paint, complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed.

All as per item No 40 above but not exc 1.5 sqm each

Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 Sqm and not exc 2.0 Sqm each, complete all as specified and directed.

S&F of 25mm thick flush shutter for cup board door / shelves solid core construction with block board core and prelamination one face with decorative face veneer with lipping/frame to match and other side prelamination with balancing white, with and incl min 5 mm thick wooden beading fixed all around, complete all as specified and directed.

S&F 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work, complete all as specified and directed.

S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick Wooden texture moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing, complete all as specified and directed. Make : Rajshree / Sintex

S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed PVC sheet and matching edges, reinforced with MS square tube, as specified in SSR Part-II 2010 (Section 8, on Page no - 175), complete all as directed. Make : Rajshree / Sintex

S&F 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.

S&F 75mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.

S&F for 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all specified and directed

S&F 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. (Make : Ashish, Classic)

S&F 100mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. (Make : Ashish, Classic)

S&F Mild steel sliding door bolts,300mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt 250mm length with hasp staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all specified and directed. (Make : Ashish, Classic)

S&F of 150mm long mild steel pressed handles, oval type, stove enamelled black and fixed with screws, complete all as specified and directed.

S&F for 150mm aluminum handle cast type anodized complete all specified and directed. (Make : Ashish, Classic)

S&F for 100mm aluminum handle cast type anodized complete all specified and directed. (Make : Ashish, Classic)

S&F mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed

S&F for Door stopper 140 mm of aluminium alloy body anodised with tongue of rubber bush at one end fixed to door, complete all as specified and directed.

S&F of rubber door seal strip with powder coated GI holder 20 to 30mm wide, fixed in doors with screws, complete all as directed.

M&L for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed.

M&L for stainless steel rod 15mm dia steel pipe for cupboard, cutting into length as required at site with and incl SS mounting brackets, complete all as specified and directed.

M&L for box type steel window with 80x40x1.25 m MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using 12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x25mm and 3.0mm thick.

M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10Cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 20mm x 20mm x25mm and 3.0mm thick.

S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed. Make : Rajshree / Sintex / Greenlam

M&L for factory made, kiln seasoned, chemically pressure treated, 30 mm thick Second class hard wood glazed & skeleton shutter for doors, open rebated & prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section–8, clause 8.24(a) and conforming to IS-1003 Part-I & II, complete all as specified and directed. Make : M/S MP Wood Product (Indore) or equivalent

M&L for factory made, kiln seasoned, chemically pressure treated, 35 mm thick Second class hard wood glazed & skeleton shutter for doors, open rebated & prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section–8, clause 8.24(a) and conforming to IS-1003 Part-I & II, complete all as specified and directed. Make : M/S MP Wood Product (Indore) or equivalent

M&L for factory made, kiln seasoned, chemically pressure treated, 30 mm thick Second class hard wood glazed & skeleton shutter for window & ventilators, (fully glazed), minimum two panels divided into squares (without sash bars) and prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section–8, clause 8.24(a) and conforming to IS-1003 Part-I & II, complete all as specified and directed. Make : M/S MP Wood Product (Indore) or equivalent

M&L for second class hard wood. Plain, solid, straight chowkhats and frame, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixing, complete all as specified and directed.

S&F 105x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F 125x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

M&L for mild steel angles, bars, flats etc, as in supports for hold fasts, pipe clamps, plain angle cleats for securing purlins, door frame, stay clamps incl nut & bolts (as required) and similar small articles confirming to Fe-290 Gde E-165, complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in bed block for hold fast & filling in pressed steel door frame, cills, pre-cast lintel not exc 1.5mtr, coping, benching, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as directed.

S&F of 3 mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed.

S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed.

S&F in replacement of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed.

Taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern, complete all as specified and directed.

S&F of Ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed.

S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, complete all as specified and directed.

S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed.

S&F PVC(SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed.

S&F PVC nahani / floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed.

S&F PVC Gully trap of 125/110 mm outlet, jointing to waste pipe with cement solvent, complete all as specified and directed.

Taking down steel tubing with and incl connections, of 15 mm dia bore, complete all specified and directed.

Taking down steel tubing with and incl connections, of 20 mm dia bore, complete all specified and directed.

M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 15 mm bore, concealed or exposed, complete all as specified and directed. Make : Jindal / Prakash Surya/ Tata

M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 20 mm bore, concealed or exposed, complete all as specified and directed. Make : Jindal / Prakash Surya/ Tata

M&L for cutting chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, complete all as specified and directed.

Dismantling of water tank of 500 to 1000 ltr capacity of any description, complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for cleaning the tank with bleaching powdred, scrubber, repairs if required like nipple, washer ( rate included) etc. and re-fixing in same position of exc. 250 litres & not exc. 500 litres capacity of tanks, complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for cleaning the tank with bleaching powdred, scrubber, repairs if required like nipple, washer ( rate included) etc. and re-fixing in same position of exc. 500 litres & not exc. 1000 litres capacity of tanks, complete all as specified and directed.

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed. Make : Sintex / Vectus

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed. Make : Sintex / Vectus / Supreme

S&F in replacement of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in replacement of 15 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. Make : Prayag / Polytuff / Pearl

S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. Make : Prayag / Polytuff / Pearl

S&F in replacement of bib cock, 15 mm dia with wall flange, fancy type, made of cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, ISI marked, complete all as specified and directed. Make : Hindware / Cera / Parryware / Prayag

S&F in replacement of bib cock, 15 mm dia, long body type with wall flange, fancy type, made of cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, ISI marked, complete all as specified and directed. Make : Hindware / Cera / Parryware / Prayag

S&F in replacement of angular stop cock 15 mm dia with wall flange, fancy type, made of cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, ISI marked, complete all as specified and directed. Make : Hindware / Cera / Parryware /Prayag

S&F in replacement of Stop cock with long shank and cup (concealed type), 15mm dia with handle & wall flange, fancy type, made of cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, ISI marked, complete all as specified and directed. Make : Hindware / Cera / Parryware / Prayag

S&F in replacement of pillar taps, 15 mm dia, made of cast copper alloy, with capstan heads, chromium plated, fancy type, suitable for high pressure flow, with or without lettered 'Hot' or 'Cold', long screwed shanks and fly-nuts, complete all specified and directed. Make : Hindware / Cera / Parryware / Prayag.

S&F in replacement of wash basin mixer, pillar tap with out popup waste system made of cast copper alloy, chromium plated fancy type, suitable for 15 mm dia bore pipe, complete all as directed. Make : Hindware / Cera / Parryware.

S&F in replacement of pillar taps, 15 mm dia, made of cast copper alloy, with capstan heads, chromium plated, fancy type, suitable for high pressure flow, with or without lettered 'Hot' or 'Cold', long screwed shanks and fly-nuts, complete all specified and directed. Make : Hindware / Cera / Parryware / Prayag.

S&F in replacement of overhead shower of dia 125 mm round shape single flow, ABS body, chrome plated fancy type, with and incl swivel type shower arm and wall flange, made of cast copper alloy, chromium plated, fancy type, complete all specified and directed. Make : Hindware/ Cera/ Parryware / Prayag

S&F in replacement of self closing angular stop cock, push button type, 15 mm dia with wall flange made of cast copper alloy, chromium plated fancy type, suitable for urinal spreader union discharge pipe, complete all as directed. Make : Hindware / Cera / Parryware

S&F in replacement of handshower (health faucet) with 8 mm dia, 1.0 mtr long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Hindware/ Cera/ Parryware / Prayag / Pearl.

S&F in replacement of SS grating of square/round shape, overall size of 125 mm with and incl fixing with CM to floor/nahani traps etc, complete all specified and directed. Make : Hindware / Cera / Parryware / Prayag.

S&F in replacement of bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Hindware/ Cera/ Parryware / Prayag.

S&F in replacement of PVC connection 450 x 15mm dia PTMT (PVC), complete all specified and directed. Make : Hindware / Cera / Parryware / Prayag.

S&F in replacement of Brass CP connection, 15mm dia and 450mm long with 2 Nos brass check nuts and washers, suitable for hot water connection, complete all specified and directed. Make : Hindware/ Cera/ Parryware / Prayag

S&F in replacement of PVC waste pipe 32 to 40 mm dia 750 mm long with for wash hand basin or kitchen sink, complete all as specified and directed.

S&F in replacement of waste coupling, chromium plated (half or full threaded), 32 mm dia size, complete all as directed. Make : Hindware/ Cera/ Parryware / Prayag / Pearl.

S&F in replacement of waste coupling, chromium plated (half or full threaded), 40 mm dia size, complete all as directed. Make : Hindware/ Cera/ Parryware / Prayag / Pearl.

S&F in replacement of plastic seat covers for water closet, of existing colour, closed pattern with flat bottom with chromium plated hinging device, complete all as directed. Make: Hindware / Cera / Pearl / Parryware / Prayag

S&F in replacement of towel rail 600 mm long with wall bracket, made of cast copper alloy, chromium plated, complete all specified and directed. Make : Hindware/ Cera/ Parryware / Prayag

S&F in replacement of Vitreous China wash basin, white colour, flat back, size 550x400mm with and including fixing brackets, 32mm dia SS waste coupling, 32 mm PVC Waste pipe 800mm long, complete all as specified and directed. Make : Cera (Ist Quality), Parry ware (super fine), Hindware (Ist Quality), Prayag (Ist Quality).

M&L for 1st quality vitreous china ware European type WC with "P" or "S" type traps and same make plastic seat cover of white colour including flush pipe, fixing bolts etc and making good of the wall & floor surface, complete all as directed. Make : Hindware / Cera / Jaquar / Parryware.

S&F in replacement of Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm, white colour with integral foot rests exluding flushing cistern & flush pipe, duly fixed in cement concrete bedding and making good of floor surface, complete all as specified and directed. Make : Cera (Ist Quality), Parry ware (super fine), Hindware(Ist Quality), Prayag (Ist Quality).

S&F of 1st quality vitreous China white urinal flat back (Large size) with and incl CP waste coupling of suitable size, wall brackets, PVC waste pipe of 750mm long, cast copper alloy CP spreader union with discharge pipe duly connected to auto closing angle cock, complete with necessary fittings, complete all as directed. Make : Hindware (Cat No - 60002) / Cera (Cat No - 5001)/Parryware (Cat No - C0575).

S&F in replacement of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white colour, dual flush type, ISI marked with and incl inlet ball valve, float and handle etc with and including wall bracket, 450mm long PTMT PVC connection, 32 mm dia PVC flush pipe, duly connected to squat pattern / pedestal pattern water closet, , complete all as specified and directed. Make: Hindware / Cera / Parryware / Prayag

S&F in replacement of SS sink with approx bowl size of 500 x 400 x 200 mm, made of 1.0 mm thick SS sheet (SS-304), ISI marked, with and incl cantilever brackets etc, duly bedding in cement mortar to dwarf wall, complete all as specified and directed. Make : Nirali / Prayag / Cera / Parryware

Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over and including a coat of red oxide, complete all as specified and directed.

Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over and including a coat of Pink primer, complete all as specified and directed.

Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (Ordinary tint), complete all as specified and directed.

Preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (Ordinary tint), complete all as specified and directed.

M&L for demolition of cement concrete of any description and in any position of WC’s/Bathroom etc in sunken portion area, removing demolished material completely and old waste pipe from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:3 on fair faces of brick work and concrete surfaces duly mixed with liquid WPC @ 150 ml in 50 Kg of cement by weight, on vertical and bottom surface of sunken portion, complete all as specified and directed. Note :- The WPC will be measured and paid separately.

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding, levelling etc and roof kerbs with liquid water proofing solution (mixed @ 150ml in 50 Kg of Cement by weight), finished even and fair with proper slope as prepatory works to water proofing treatment, complete all as specified and directed. (Note : Water proofing compound, as required, shall be measured & paid separately under respective item only)

M&L water proofing treatment to toilet area of sunken floor complete all as specified and directed by Engr in charge with following course of description below :- (a) Applying first layer of cement slurry @ 0.488Kg/Sqm mixed with acrylic based polymer modified cementation composite compound coating @ 0.253Kg/Sqm of make as approved in technical instruction 5/2003 and be allowed to air cure for 4 Hours (b) Second layer of cement slurry @ 0.242Kg/Sqm mixed with acrylic based polymer modified cementation composite compound coating @ 0.126Kg/Sqm and be allowed to air cure for 4 Hours (c) Followed with water curing and testing for leak proof by ponding test for 48 Hours

M&L for PCC 1:5:10 type E2 (40mm grade stone aggregate) as in mass concrete, filling in two layers in sunken portion, complete all as specified and directed.

M&L for 50mm dia PVC pipe, medium grade, as in spout to drain out, in sunken portion, complete all as specified and directed.

Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as directed. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika

M&L for Cutting/ Griding/ polishing on existing terrazzo flooring as per local trade practice, complete all as specified and directed

M&L for Cutting/ Griding/ polishing on existing terrazzo on vertical surface as per local trade practice complete all as specified and directed

Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime cova 80 to 100mm thick mud phuska/cement concrete/lime cova etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush, with and incl demolition of cement concrete tiles, complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding, levelling etc and roof kerbs with liquid water proofing solution (mixed @ 150ml in 50 Kg of Cement by weight), finished even and fair with proper slope as prepatory works to water proofing treatment, complete all as specified and directed. (Note : Water proofing compound, as required, shall be measured & paid separately under respective item only)

M&L for 10 mm thick rendering in CM (1:4) mixed with water proofing compound @ 0.20 Ltr/bags on roof surface when concrete is green, complete all as specified and directed. (Note : Water proofing compound, as required, shall be measured & paid separately under respective item only)

M&L water proofing treatment to roof slab with AAPP based modified polymeric membrane, seven layered with centre core 100 micron HMHDPE, outer film 20 micron each, having thickness 3mm weight not less than 3kg/Sqm with 100mm overlap laid as per manuacturer's instructions, complete all as specified and as directed by Engineer-in-Charge with following course of description below:-

(a) 1st coat applying bitumen primer confirming to IS-3384-1965 @ 0.40 Kg/Sqm to be applied on prepared roof surface till the surface is properly impregnated

(b) 2nd coat of bonding material using blown type bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm

(c) 3rd course ie. laying of APP Based modified membrane described herein before with 100mm overlap in longitudinal direction and 150mm in transverse direction, all joints and changes in all direction should be covered covered with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane.

(d) Forth course of bounding materialusing blown grade bitumen 85/25 conforming to IS-702 @ 1.20 Kg Per Sqm and over spread course sand for making roughening the surface to receive the next layer treatment.

M&L for cutting grooves in brick wall, 75mm wide and 65 mm deep and shapping horizontal face of groove with cement mortar (1:3), complete all as specified and directed.

M&L for applying one coat of bituminious aluminium paint @ 0.20 Kg Per Sqm over APP membrane, complete all as specified and directed.

M&L for factory made plain cement concrete tiles with grey cement and no pigment, of size 20 cm x 20cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6 mixed with with water proofing compound @ 0.20 Ltr/bags, complete all as specified and directed.

Dismantling of asbestos cement/steel sheeting (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed.

Dismantling timber scantling under 40 Sqcm in section in any position unframed work, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description, complete all as specified and directed.

M&L for 6.0mm thick asbestos cement, corrugated or semi-corrugated sheets, fixed with L-type or J-type or cranked hook bolts in roofs, walls etc, complete all as speified and directed.

M&L for 6.0mm thick asbestos cement, one piece plain angular ridge or two piece adjustable plain wing ridge, fixed with L-type or J-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed.

S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed. Make : Jindal / Tata / Everest

S&F in replacement of 25x5 mm thick MS flat iron as in wind tie for roof including securing bolts confirming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed.

M&L for structural steel, as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe-410-W(Gde-E-250) quality-A, complete all as specified and directed.

Demolition of RCC not exceeding 15cm thickness in roofs, floors (other than ground floors), beams staircases, landing, chajjas, Cover slab and similar suspended work, complete all as specified and directed.

M&L for RCC (nominal mix) Type A1 1:1.5:3 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc, complete all as specified and directed. (Note : The steel reinforcement shall be measured and paid separately).

M&L for RCC (nominal mix) Type A1 1:1.5:3 (using 20mm graded stone aggregate) as in chajjas, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

All as per Srl item No 163, mentioned here-in-before but mild steel TMT bars of 5mm dia and over upto and incl 10mm dia as in stirrups, spacers and binders.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exc 200mm thick (Horizontal or sloping), complete all as specified and directed.

Use and waste of form work to soffits of chajjas and similar work including edges complete for rough finished surface, complete all as specified and directed.

M&L for 50 micron powder coated aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm, complete all as specified and directed.

M&L for 50 micron powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated 100mm aluminum hinges 03 Nos in each door, powder coated 200mm aluminum tower bolts 01 No in each door, 06 lever mortise lock 100 mm size - 01 No, powder coated aluminum snap beading, screws etc, complete all as specified and directed.

M&L for 50 micron powder coated aluminum window shutters, side hung type without sash bars, aluminium sections for frame weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing, powder coated aluminum snap beading, screws, powder coated aluminum fittings such as peg stays 150mm long (01 No), hinges type B-21 100mm long (02 No), suitable handle (01 No), complete all as specified and directed.

M&L for 50 micron powder coated aluminium wall partition, window and ventilator shutters, fixed type without sash bar, fabricated out of powder coated aluminium hallow square or rectangular section of required size weighing 0.55 Kg/m incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified.

M&L for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg, complete all as specified and as directed.

M&L for double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and as directed.

S GOURAV PRAKASH ENTERPRISES

M/S AADI TRADERS

A K ENTERPRISES

M/s Jagdish Chandra Arora

S C KHARE

HARNAM SINGH ANIL SINGH

M/S Kesav Dev Agarwal

m/s ramesh saran agarwal