CERTAIN MISC PETTY B/R DAY TO DAY REPAIR WORK TO

Amount

Petty repairs to plumbing / internal water supply works through Authorized Service personnels by OEMs of connected to sanitary fittings, such as repair to leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low levelled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon taps and including small GI fittings such as GI elbow, socket, union, etc as required at site and as directed by the Engineer-In-Charge.

S&F in repairs of 1" dia size, MS curtain rods of Antique Brass Circular Brushed finished, complete, etc, all as specified and as directed.

S&F in repairs of brass curtain rod brakets suitable for fixing 1" dia size curtain rail, fitted over wooden round gatta, complete etc, all as specified and as directed.

Supply only of Brass Door handles (Fancy type) of size 9" to 10", complete, etc, all as specified and as directed.

Supply only of brass finished door stopper, complete, etc, all as specified and as directed.

Supply only of brass tower bolt, 8" complete, etc, all as specified and as directed.

Supply only Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as directed by Engr-in-Charge.

Supply only Aluminium Mortice lock of 4 levers in vertical type of size 100 mm

Supply only brass 300mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repairs all as specified and as directed.

Petty repairs to joinery works such as easing of doors, windows, kitchen cabinets, refixing builder hardware gauage, etc, by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works directed by the Engineer-In-charge.

Petty repairs to aluminium joinery works such as aluminium windows, aluminium ventilators and like similar works auch as easing of doors, refixing of doors, windows, refixing builder hardware such as aluminium beeding, etc., as required at site and as directed by the Engineer-In-Charge.

Petty repairs to plumbing / internal water supply works such as repair to leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low levelled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon taps and including small GI fittings such as GI elbow, socket, union, etc as required at site and as directed by the Engineer-In-Charge.

S&F in repairs Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan and fixed-in-repairs, complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet pan (Pedestal pattern) white, fixed in repairs (excluding fixing bolts, flushing cistern and pipe) including taking down.

S&F in repair Vitreous China wash down water closet pan (Pedestal pattern - Cascade Type), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, flush pipe and plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromoium plated amluminim hinging device complete all as specified. Make: Jaguar / Cera /HINDWARE

Supply and fix plastic water closet seat cover any colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixing in repairs.

Dismantling floor hearth or wall tiling including cement mortar bedding including backing (if any) removing serviceable tiles to store and rubbish off the premises.

M&L for Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in cement mortar 1:4 etc complete.

M&L for Light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:3 etc complete

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in cement mortar 1:4 etc complete

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:3 etc complete

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in cemewnt mortar 1:4 etc complete

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surfaces set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:3 etc complete

S & F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ball valve float and handle including brackets and flush pipe of polyethylene of density of PVC 32 mm for low level cistern etc complete all as specified and directed.

S&F in repair wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed.

S&F in repairs 32mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed.

S&F PVC Connection 15mm size with PTMT Nuts of length 60cmmm and fixed-in-repairs, complete all as specified and as directed.

S&F in repairs, health faucet (ABS Body) mild steel chrominium plated suitable for 15mm dia pipe with 1.25 metre long flexible connection and fixing in position, complete all as specified and as directed.

S & F in repairs 15mm bore Pillar taps, cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed

S & F in repairs bip taps 15mm chromium plated cast copper alloy with crutch or butterfly handle, screw down for iron pipe or for brass ferrule all as specified and directed.

S&F in repairs two in one Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge

S&F in repairs of powder coated curtain rod brakets suitable for fixing 1" dia size curtain rail, fitted over wooden round gatta, complete etc, all as specified and as directed.

S&F in repair Chromium plated fancy type bib taps (Long Body) with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.

S & F in repairs stop valves 15mm , cast copper alloys, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions all as specified and directed.

S&F in repairs Brass CP mixer Pillar Tap for hot & cold (SINGLE LEVER BASIN MIXER) water screwed down for iron pipe complete all as specified and directed.

S&F in repairs Brass CP mixer for mixing hot & cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed, all as specified and directed.

S&F in repairs , Brass chromium plated shower rose 125mm size

M & L PVC floor trap with grating including jointing with solvent cement, 75 mm dia outlet.

Taking up or down steel tubing and connections, 15mm bore.

Taking up or down steel tubing and connections, 20mm bore.

S & F 15 mm bore of tubes medium grade, galvanised with all fitting and complete to walls and ceilings or laid in floors complete all as specified.

S & F 20 mm bore of tubes medium grade, galvanised with all fitting and complete to walls and ceilings or laid in floors complete all as specified.

Taking down rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends etc complete.

Supply and fix PVC (SWR) pipes single socketed 75 mm bore fixed in walls/Sunken floor.

Supply and fix PVC (SWR) bends 75 mm bore of any radius.

Supply and fix PVC (SWR) door Tee of size 75 mm.

Hacking out old broken glass ( any thickness, size, quality or description) from metal frame frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones including supply and fix 4mm thick sheet glass ordinary quality in square or n. exc 0.5 sqm each pane up to 4th floor complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass ( any thickness, size, quality or description) from metal frame frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones including supply and fix 4mm thick sheet glass ordinary quality in square or exc 0.5 sqm each pane above 4th floor complete all as specified and directed by Engr-in-charge.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc incl removing of debrie all as specified and directed.

Material and Labour for PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete as directed.

Material and Labour for PCC (1:2:4) type B-O using 12.5 mm graded stone agg as in padding over roof for filling depression and making proper slope complete all as directed.

S&F in repairs of Mirror Cabinet 12"x18" of size, fixed to walls complete, all as specified and as directed

M & L for rendering 5mm thick cement plaster in cement mortar 1:3 on ceiling including finished even and smooth without using extra cement

Rendering 10 mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement

Rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound.

M&L for preparation of new surface/undecorated surfaces surface of ceiling and applying three coats of white washing.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified

S&F in repair galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm dia and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

Removing demolished material to a distance n.exc 5 KM outside MOD land and depositing where directed at a level n.exc 1.50 M above the starting points all as specified.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 250 liters and not exc 500 liters and writing date of cleaning with white paint on each tanks complete all as specified and as directed.

Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc exc 500 liters and not exc 1000 liters and writing date of cleaning with white paint on each tanks complete all as specified and as directed.

Dismantling water tanks capacity exc 250 n.exc 500 litre and removing to store etc. complete all as directed by Engr-in-Charge.

Dismantling water tanks capacity exc 500 n.exc 1000 litre and removing to store etc. complete all as directed by Engr-in-Charge.

S&F in repairs rotational moulded polythylene water storage tanks 500 ltrs capacity ISI MARKED (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed by Engineer-in-Charge. Make- SINTEX/ POLYCON/ ROTEX

All as per item No 67 above but 1000 Ltrs capacity.

S&F in repair round moulded PVC water tank lid for 500 litres/1000 litres, complete all as specified and directed.

S&F steel plate rack for kitchen of approved make and size all as directed and as specified (Size - 900x600x200mm) Make- Blue star/ Paryag/ Nirali/Jayna

S & F in repairs old Floor door stopper aluminium alloy body and tongue, 150 mm overall length, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed

S& F in repairs of Acrylic Bathroom Corner Shelf 8"x8" inch curved shape, fixed in walls all as specified and as directed. Make- Paryag/ Jaquar

S& F in repairs of Acrylic Soap Dish of 5" size, fixed in walls all as specified and as directed

S&F in repairs Glass Soap dish fancy type, fixed in walls all as specified and as directed. Make- Paryag/ Jaquar

Dismantling of granite stone slabs of any description and of any size laid bedded and pointed in any cement mortar all as specified and directed .

M & L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillers, windows-cill, cooking platform and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with of pigment to match with shade of granite etc., including 20mm screed bed in CM1:4 all as specified and as directed.

M& L for Rounding to edges of granite stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified.

S&F in repairs of Ball brass valves, for 20mm dia pipe high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.

S&F in repairs of Ball brass valves, for 25mm dia pipe high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.

S&F in repairs Vitreous china Urinal, half stall type, white (Excluding flushing cistern, flush pipe and waste pipe) Fixed in repair.

S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe for half stall urinals. Make- Paryag

M&L in repairs for 18/19mm thick Perlaminated particle boards, interior grade perlaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used and edges will be painted to match with printed sheet including reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading. colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100 mm long butt hinges extruded Aluminium alloy with galvanised mild steel hinge pin, bright polished Type B-21 fixed to PVC door with screws complete all as specified.

S&F 150mm long Aluminium anodised barrel tower bolts of extruded section fixed to PVC door with screws complete all as specified.

S&F 150 mm long Aluminium anodised handles extruded section fixed to PVC door with screws complete all as specified.

S&F in repairs MS piano hinges for cupboards of size 18mm width fixed complete, all as specified and as directed

S&F in repairs of Toilet paper holder of brass, chromium plated or stainless steel, fixed to walls, complete, all as specified and as directed

S&F in repairs MS Helical Door Spring fixed to doors complete, all as specified and as directed

Supply only integral water proofing compound.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in hard/dense soil all as specified and directed.

Excavation in trenches n.exc. 1.5 m wide and exc. 1.5 m and n. exc. 3.0 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in hard/dense soil all as specified and directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick each all as specified and directed.

Removing the excavated soil to a distance exc 250 m and n.exc 500 m and depositing where directed all as specified.

Demolition and breaking up drain pipes(salt glazed ware,AC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed for 150mm bore pipe all as specified and directed. .

All as per item no 97 above but 200 mm bore pipe.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40 mm grade crushed stone aggregate for 150mm bore drain pipe all as specified and directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40 mm grade crushed stone aggregate for 200 mm bore drain pipe all as specified and directed.

M&L for SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified.

M&L for SWG drain pipe grade 'A' of 200 mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting ou existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm bore SWG pipe all as specified and directed.

Description All as per item no 103 above but 200 mm bore.

M&L for Cleaning of all blockage of Nahani trap/ floor trap, bottle trap, gully trap P or S traps of WCs, 100/75mm dia CI pipes upto 1st MH, CI/SGSW pipes between gully trap and 1st MH, CI/PVC 'T'/ Door bends etc to maintain internal sewage system and any type of sewage line ie branch sewer line, main sewer line etc, manholes of any section and depth, any situation by way of cleaning/disludging manholes by using any type of manually,mechanically or by way of any other suitable means including foreign materials as well as rodding of sewer lines and between successive from block manholes where required and ordered by Engineer-in-charge and keeping the sewage line functional cleaning trap,water closet,soil waste/vent pipe,gully traps upto final drop out let into septic tanks or central sewage system treatmenting in other adjoining Zone/Area of into sewage well (working in foul condition with taking precautionary measures) equipment as required or applicable all as specified and directed. manholes of any size and depth and removing the sludge/material and depositing outside the MOD land complete all as directed by Engr-in-Charge.

NOTE : (i) Sufficient number of persons shall report daily for working under the area Vishwa Vihar (AF) camp cell in charge JE in all working days from 08.30 Hrs to 16.30 Hrs with necessary T&P. (ii) Complaint must be attended within 24 hours of receipt of complaint else recovery of Rs. 100/-per complaint/ per day will be Charged. (iii) The cost of transportation (to and from) and other necessary T&P, flexible rods, wires, bamboo sticks and other equipment and safety gear shall be arranged/ bought by contractor to complete the job and no extra cost cost shall be paid to the contractor in this effect. (iv) Apprroximate length of sewage line is 1050 Rm. (v) Apprroximate No. of MH IS 150Nos. (vi) Apprroximate No. of Md Accn is 100 No. and OTM 10 No.

Cleaning and de-sludging of existing septic tanks / deep manholes up to 4 metre deep including taking out sewage water / sludge in any form alongwith all other foreign materials by mechanical equipment or manually or by way of any other suitable means including removal of sludge and other foreign materials out side the MD land by any means complete(working in foul condition) all as specified and directed.

Removal / taking out of sludge muck consisting of loose aggregate sediments mud etc from filter bed and refilling the same after cleaning/washing into the filter bed.

Excavation in trenches for exposing the sewage line and breaking SGSW pipe horizontally on top to help cleaning the sewer line from Manhole to the location where the SGSW pipe is broken and covering the broken portion of SGSW pipe from the top and sealing the opening in CM (1:3) including returning filling and ramming in trenches with excavated earth and disposal off surplus earth to a distance not exceeding. 50 m complete all as directed by Engr-in-charge (irrespective of depth and type of soil).

Demolition of existing SWSG gully trap including PCC kerb etc and supply and fix SWG gully trap square mouthed 100mm size set in PCC (1:3:6) type C1 block measuring 450mm and 100mm thick bed concrete and jointing to drain pipe in CM (1:1) including 100x150mm high PCC kerb in (1:2:4) type B1 with CI perforated grating 150x150mm bituminous coated including disposal of waste/sludge complete all as directed.

Demolition of PCC around floor trap and dismantling existing floor trap and cleaning the blockage of pipe from floor trap to gully trap and supply and fix PVC floor/Nahani trap in existing pipe and embedding in CM (1:1) including lowering or raising with vertical piece with PVC pipe for jointing trap and fixing gratings at true level of floor complete all as directed.

Demolition of Brick / stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M & L for Pre-cast cement concrete block masonry( type C-1) 1:3:6 (20mm agg) with solid blocks, exc 10 cm in width and setting in mortar 1:6 complete all as specified and as directed.

Material and Labour for Cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, benching including finishing the concrete surface even & smooth without using extra cement including necessary form work complete all as specified and as directed.

Material and Labour for forming fair finish to channel in manholes using extra cement.

Material and Labour for rendering 15mm thick in cement mortar 1:4 on brick or cement concrete surfaces & finished even and smooth without using extra cement. (WPC will be meausred and paid separately)

Material and Labour for PCC (1:3:6) type C2 using 40mm graded stone aggregate in foundation.

Demolition of reinforced cement concrete of any descripition and any position not other wise specially provided all as specified and as directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover & septic tank covers slabs etc including necessary form work and set in CM (1:4) all as specified and directed. Note:- Reinforcement will be measured and paid seperately

S/F MS TMT bars 10 mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.

S/F MS TMT bars 6mm to 8mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking down rain water pipes / Drain pipes/ Soil waste pipes of any description and any size any pattern incl all fittings heads, shoes bends etc all as specified and as directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm all as specified and directed..

S&F branch pieces, single (equator unequal) ordinary or inverted (size or socket type) or with parallel branches with oval access door bore of pipe 100mm. all as specified and directed.

S&F PVC(SWR) bends 110 mm dia.

S&F PVC(SWR) junction double,(double T),equal or unequal. 110 mm dia with access door.all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed.

S&F for PVC (SWR) gully trap of 125/110 mm dia set and jointing wilh solvent cement complete all as specified and directed.

S&F straps, supports or stays for rainwater, ventilating pipes, including bolts, if required with MS Flat Iron brackets for fixing PVC (SWR) pipes of 110mm dia single socketed in any length with @ 2.0 mtr interwell fixed to walls complete all as specified and directed.

Removing building materials etc to a distance of 5km outside MOD land, beyond the lead included in the rates, including loading, unloading and stacking at the destination.

G K CONSTRUCTIONS (BID ID -3078081)

Moulya Builders (BID ID -3079700)