REPAIR TO WOODEN/ STEEL / ALUMINIUM JOINERY IN OTM ACCN NORTH SIDE UNDER AGE BR-III OF GE (N) BATHINDA AT BATHINDA MIL STN

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.

Taking down shutters only of any description area not exceeding 1.0 sqm each and removing from site complete all as specified and as directed by Engineer-in- charge.

Taking down shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and removing from site complete all as specified and as directed by Engineer-in- charge.

Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and refixing in same opening after necessary easing, adjustments, minor repairs, oiling, adjustment with cutting or fixing plain fillets/planks made from second class hard wood etc to remove gap between floor and shutter complete all as specified and as directed by Engineer-in- charge.

Supply and fixing in repair new Beads, straight (any size as per existing) for glazed or gauzed joinery, renewed, including mitres etc. made out of 2nd class hard wood and removing old beads including painting work to match the existing complete all as specified and as directed by Engineer-in-charge.

Supply and fixing factory made 75 x 60mm pressed steel frames, thickness of sheet 1.25mm for doors with one or more rebates including supply and fixing necessary lugs and lock strike plate, etc. , including fixing butt hinges suitable Nos as directed for each leaf, including making good disturbed wall surface (brick and plastering work) complete all as specified and as directed by Engineer-in- charge. Note : - (i) Butt hinges shall be measured and paid separately under appropriate item of BOQ.

Supply and fixing factory made 105 x 60mm pressed steel frames, thickness of sheet 1.25mm for doors with one or more rebates including supply and fixing necessary lugs and lock strike plate, etc. , including fixing butt hinges suitable Nos as directed for each leaf, ncluding making good disturbed wall surface (brick and plastering work) complete all as specified and as directed by Engineer-in- charge. Note : - (i) Butt hinges shall be measured and paid separately under appropriate item of BOQ.

Supply and fixing factory made 125 x 60mm pressed steel frames, thickness of sheet 1.25mm for doors with one or more rebates including supply and fixing necessary lugs and lock strike plate, etc. , including fixing butt hinges suitable Nos as directed for each leaf, ncluding making good disturbed wall surface (brick and plastering work) complete all as specified and as directed by Engineer-in- charge. Note : - (i) Butt hinges shall be measured and paid separately under appropriate item of BOQ.

Material and Labour for mild steel framed/unframed work using MS angle iron, flat iron, T section with web and flange conforming of Fe-290 Gde E 165, cut to shape, drilled, including welding work, counter shunk for screw incl bending as necessary guesset plate, bolting/riveting etc for cooler stands, brackets, for door frame (chowkhat) or in any position, including making good disturbed wall surface (brick, plastering and PCC work ) including taking down old steel as scrap complete all as specified and as directed by Engineer-in-charge.

Cutting holes in brick wall in cement mortar for inserting holdfast/angle of cooler stand and making good dismantled portion in cement mortar 1:3 or cement mortar 1:2:4 type B-1 using not exc half brick wall depth of embedded portion of holdfast or lugs measured from the face of the jamb into walls, complete all as specified & directed by Engineer-in-charge.

Material and labour for PCC (1:3:6) type C-0, using 12.5 mm graded aggregated as in back filling of chowkhats and for filling in block of hold fast complete all as specified and as directed by Engineer-in-Charge

Supply & fixing factory made plain framed panelled shutters (two or three panels as approved), 35mm thick of 2nd class hard wood (Hollock) with lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces or timber flat on both sides (feather edged). The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhat complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.

Supply & fixing factory made glazed and skeleton shutter, 35mm thick of 2nd class hard wood (Hollock) open rebated (two or three panels as approved) and prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/wire cloth, etc. Sizes of members as specified in SSR Part-I, Section 8 and fitted to chowkhats, menbers shall be kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item of BOQ. (ii) Glazing or wire cloth shall be measured paid separately under appropriate item of BOQ.

Supply & fixing flush shutter 35mm thick, solid core construction with block board core and plywood face panels, commercial type on both sides including adhesive for pasting and screws for fixing to timber frame complete all as specified and as directed by Engineer-in- charge.

Supply & fixing stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified & directed by Engineer-in- charge.

Supply & fixed in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified & directed by Engineer-in- charge.

Supply & fixing mild steel barrel tower bolt stove enamelled black with bright bolt 200 mm long, fixed complete all as specified & directed by Engineer-in- charge.

Supply & fixing mild steel sliding door bolts 300mm long, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts washers, four on bolt plate and two on staple plate complete all as specified & directed by Engineer-in- charge.

Supply & fixing mild steel pressed handle of size 200mm, oval type, stove enameled black complete all as specified & directed by Engineer-in- charge.

Supply and fixing 300mm ordinary rat tail rod pattern spring including roller and roller plate and fixing to wooden frame with screw or with welding to metal frame as required complete all as specified and as directed by Engineer-in- charge.

Supply and fixing in replacement 300mm ordinary rat tail rod pattern spring including roller and roller plate and fixing to wooden frame with screw or with welding to metal frame as required complete all as specified and as directed by Engineer-in- charge.

Supply & fixing 150mm long (overall length of cover plate ) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, including sutable screws for fixing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out 5mm thick plain clour PVC sheet reinforced with MS square tube including painting of edges to match with sheet, all as specified & shown in relevant drawing of item No. 8095 in MES Schedule SSR-2020 (Part-II), fixed in opening using MS screw 75mm long with PVC fastener including making good disturbed wall surfaces (brick, plastering, tiles and painting work as per existing) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing factory made solid core PVC door shutter 30mm thick (stiles) consisting of frame made out of MS tubes of 19mm gauge thickness and size of 19mmx19mm for stiles and for top and bottom rails 15mmx15mm. MS frame shall have a coat of red oxide primer of approved make and shall be covered with heat moulded plain colour PVC sheet, 'C' channel of size 30x50mm forming stiles and 5mm thick wide PVC sheet strip of 20mm width stuck inside with solvent cement for stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and 10mm (5x2mm) thick, 20mm thick PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side and joined together with solvent cement adhesive and an additional 5mm thick PVC strips of 20mm width is to be stuck on interior side of C channel using PVC solvent adhesive as per manufacturer's instructions, door to be fixed to frame with and including 3 Nos MS powder coated butt hinges heavy duty of size 75mm long x 25mm wide and 2mm thick and 32mm long steel screws drilled suitable to pass through both the walls of the MS tube complete all as specified in SSR-2009 (Part-I, specifications) & shown in relevant drawing of item No. 8080 in SSR-2020 (Part-II, rates). The width of stiles & rails will be in proportion to the width of the door shutter as specified in SSR-2020 (Part-II). complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm thick Plain colour PVC Sheet on back face, with Particle board core, door to be fixed to frame with and including 3 Nos MS powder coated butt hinges heavy duty of size 75mm long x 25mm wide and 2mm thick and 32mm long steel screws drilled suitable to pass through both the walls of the MS tube complete all as specified in SSR (Part-I, specifications) & shown in relevant drawing of item No. 8102 in SSR (Part-II, rates) complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing powder coated aluminium anodised frame, made out of aluminium section weighing 0.98 Kg/mtr, for doors, windows, ventilators with one or more rebate including jointing cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. Note :- If aluminium section used other than above mentioned weighing then weight of each section shall be physically ascertained through a board of officers convened by Accepting officer and payment shall be made only after the actual weight at site.

Supply & fixing powder coated anodised aluminium door shutter, made out of aluminium section weighing 0.55 Kg/mtr, including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos and aluminium hinges 04 Nos in each leaf (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed by Engineer-in-Charge. Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass (supply only) shall be measured and paid separately under appropriate item of BOQ.

Supply & fixing powder coated anodised aluminium window/ ventilator fixed type without sash bars, made out of aluminium section weighing 0.55 Kg/mtr, including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws etc. including fixing of glass, complete all as specified and directed by Engineer-in-Charge. Note ;- Glass (supply only) shall be measured and paid separately under appropriate item of BOQ.

Supply & fixing powder coated anodised aluminium window/ventilator shutter side hung type without sash bars, made out of aluminium section weighing 0.55 Kg/mtr, including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 No. for ventilator and 3 Nos for window each shutter) suitable handle (1 No.), including fixing of glass, complete all as specified and directed by Engineer-in-Charge. Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass (supply only) shall be measured and paid separately under appropriate item of BOQ.

Supply only sheet glass and glazing with beading of any size of 5.5mm thick, complete as specified and as directed by Engineer-in-Charge.

Supply & fixing aluminium (extruded section body) body door closer hydraulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg, ISI marked complete all as specified & directed by Engineer-in-charge.

Supply & fixing in replacement aluminium (Die cast) body door closer hydraulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg, ISI marked complete all as specified & directed by Engineer-in-charge.

Supply & fixing in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified & directed by Engineer-in-charge.

Supply & fixing 140mm long (overall length of cover plate ) Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, including sitable screws for fixing complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair Mortice lock, aluminium body, 4 levers, vertical type, size 100 mm complete all as specified & directed by Engineer-in-charge.

Taking down aluminium shutter of any description (with or without frame as per site requirement) area exceeding 1 sqm but not exceeding 2 Sqm each and refixing in same opening after necessary easing, minor repairs, adjustment /alignment, replacement broken beading and rubber packing, tigtening of screws, adjustment of hinges, adjustment of fittings like handle/tower bolt/door stopper etc (glass if required for taking out, same shall be refix as per original, if any damage during repair same shall be replaced by contractor without any extra cost to department) complete all as specified and as directed by Engineer-in- charge.

Taking down aluminium shutter of any description (with or without frame as per site requirement) area not exceeding 1 Sqm each and refixing in same opening after necessary easing, minor repairs, adjustment /alignment, replacement broken beading and rubber packing, tigtening of screws, adjustment of hinges, adjustment of fittings like handle/tower bolt/door stopper etc (glass if required for taking out, same shall be refix as per original, if any damage during repair same shall be replaced by contractor without any extra cost to department) complete all as specified and as directed by Engineer-in- charge.

Supply and fixing 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed by Engineer-in-charge.

Supply and fixing stainless steel butt hinges 100mm, medium weight, cold rolled, complete as specified and as directed by Engineer-in-Charge.

Supply and fixing Extruded aluminium alloy handles, fabricated type, anodised,150mm long complete all as specified & directed by Engineer-in-charge.

Supply and fixing 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed by Engineer-in-charge.

Supply and fixing Extruded aluminium alloy handles, fabricated type, anodised,125mm long complete all as specified & directed by Engineer-in-charge.

Supply and fixing stainless steel butt hinges 75mm, medium weight, cold rolled, complete as specified and as directed by Engineer-in-Charge.

Supply & fixing 100mm long aluminum anodised hasp & staple, safety type, with mild steel hinge pin including bolt to hinge plate fixed with and including screws complete all as specified and directed by Engineer-in-charge.

Supply & fixing, factory made steel window confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with glazing bars including fixing of lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks / plastering works and painting work etc complete all as specified & as directed by Engineer-in- charge.

Supply & fixing, factory made steel window confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, without glazing bars including fixing of lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks / plastering works and painting work etc complete all as specified & as directed by Engineer-in- charge.

Material and labour for mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, framed work of water tanks and similar works including taking out old rusted steel as scrap complete all as specified and as directed by Engineer-in- charge.

Supply & fixing, factory made steel ventilators all as per IS 1038/83, with top hung shutters including hinges, suitable steel handle, steel peg stay, fixing lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks/plastering works and painting work etc complete all as specified & as directed by Engineer-in- charge.

Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete including fabrication as directed, including hold fast, locking arrangement, sliding door bolt, stopper etc conforming to Fe-410-W (Gde E-250) quality A including taking out old rusted steel as scrap complete all as specified and as directed by Engineer-in- charge

Material and labour for steel rolling shutters push pull or manual type made out of 1.25 MM thick lath, without ball bearing, as specified including top cover, anchoring rod hasp and staple, guide channel, lock, hold fast, complete all as specified in SSR Part-I (2009) para 10.23 including PCC block, erected in position as directed including two coats of synthetic enamel paint over a coat of red oxide primer both sides on exposed surfaces including taking out old defected/rusted shutter and making good the disturbed wall surfaces (brick, plastering and painting work as per existing) complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing in repair/replacement 18-20mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including cutting and made to shape as required complete all as specified & directed by Engineer-in- charge.

Supply and fixing in repair/replacement 18-20mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws/nails/fevicol to timber frame work as in cupboard shutter, shelves etc. including cutting and made to shape as required complete all as specified & directed by Engineer-in- charge.

Supply & fixing Continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap when open 30mm complete all as specified and as directed by Engineer-in-charge .

Supply and fixing cupboard knob 40mm dia fixed with nut, screw and washer complete all as specified and as directed by Engineer-in-charge .

Supply and fixing in replacement drapery curtain rod 19/20mm dia, fabricated out of mild steel pipe with PVC coating (ABS), wall thickness of pipe not less than 20 guage, including fancy type brackets and decorated end knobs (finials), stop roller etc, fixed on wall for doors and windows curtains, cuttings as required length and fixing at site including fixing arrangements, rawl plug, screws etc. including taking out old any type rod or pelmet boxes with curtain rod complete all as specified & directed by Engineer-in- charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, oil putty complete all as specified & directed by Engineer-in- charge.

Supply & fixing and cutting as per size requirement 4mm thick sheet glass ordinary quality in squares/retangular exceeding 0.5sqm in each pane and fixed in any type of doors / windows / ventilators (openable/fixed type) with fixing material complete all as specified & directed by Engineer-in- charge.

Supply & fixing and cutting as per size requirement 4mm thick sheet glass ordinary quality in squares/retangular not exceeding 0.5sqm in each pane and fixed in any type of doors / windows / ventilators (openable/fixed type) with fixing material complete all as specified & directed by Engineer-in- charge.

Supply & fixing, 4mm thick frosted eatched (one side) in squares/retangular not exceeding 0.5sqm in each pane and fixed in any type of doors/windows/ventilators with fixing material complete all as specified & directed by Engineer-in- charge.

Repairs to existing steel members, door frame/mild steel window frame, repair to steel gates/ door of garrage by welding (metal to be welded) by Running welding at site in any position not exceeding 6mm in thickness complete all as specified and as directed by Engineer-in-charge.

Repairs to existing steel members, door frame/mild steel window frame, repair to steel gates/ door of garrage by welding (metal to be welded) by welding at site in any position not exceeding 6mm in thickness and not exceeding 2.5cm in length of welded members at site in any position complete all as specified and as directed by Engineer-in-charge.

Supply & fixing 100mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with and including screws complete all as specified and directed by Engineer-in-charge.

Supply & fixing 125mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with and including screws complete all as specified and directed by Engineer-in-charge.

Demolition of brickwork or stone / boulder masonry, built in cement mortar or cement lime mortar in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge.

Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge.

Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rendering/plastering 15mm thick in cement mortar (1:6) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Demolition of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from the site to a distance not exceeding 100 metre and deposited as directed complete all as directed by Engr-in-Charge

Material and labour for Glazed ceramic coloured tiles of size 350mmx 250mm / 450mmX 350mm// 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick (Av thickness) bedding layer (rendering) in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for vitrified ceramic coloured tiles (light shade) 10 mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

Material and labour for vitrified ceramic coloured tiles (light shade) 10mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (screed) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

Material and labour for Non Skid ceramic coloured tiles 7 to 8mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (screed) in cement mortar (1:4) including making good excess taking down plaster area (above skirting tile ) complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engineer-in- charge.

Material and labour for Preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engineer-in- charge.

Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying two coats of oil bound distemper paint as per approved tint/colour with using paint brush complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying two coats of cement base paint as per approved tint/colour with using paint brush complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing anodised aluminium snap grid frame work of size of grid 605 x605mm for false ceiling including necessary notching and prepared holes, the snap grid shall consist of anodised aluminium main tee of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/RM, cross and Intermediate tee of size 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM. The main and cross tee shall be jointed at junction with steel screws or MS bolts, nuts and washers, the snap grid (main / cross tee sections) shall be supported at ends all along the wall with anodised aluminium angle of size 35mm x25mmx 2mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and duly suspended with 4mm GI wire hangers (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 12mm thick gypsum board in grid fixed in false ceiling grid made of aluminium including taking down of old ceiling/ wall board of any size as per above specifications complete all as specified and as directed by Engineer-in-charge.

Material and labour for hollow PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification, inluding taking down old PVC wall panelling and wall boards complete all as specified and as directed by the Engineer-in-Charge.

M/s MITTAL CONSTRUCTIONS

V K CONTRACTOR

M/s DHEERAJ JAIN CONSTRUCTION COMPANY

M/s Vandana Builders

M/S VIAJY BUILDERS & DEVELOPERS

M/S SAI BUILDERS

M/s Kamal Builders

M/s Manav Builders