Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹29.4 L
EMD Value
₹29,400
Closing Date
24 Nov 2022, 3:00 pmClosed
BLOCK DEVELOPMENT OFFICER(VP)
BLOCK DEVELOPMENT OFFICER(VP),KUMBAKONAM
Construction Of Panchayat Office Building At Senganur Panchayat
2022_RDTN_265619_1
3689/2022/B1
Open Tender
Civil Works - Buildings
Item Rate
365 days
Senganoor
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹29,400
Yes
7 Feb 2023
19 Nov 2022
24 Nov 2022
19 Nov 2022
24 Nov 2022
19 Nov 2022
Amount
Part.01.Construction of Panchayat office Building @ Senganur Panchayat.
Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.
Collection and supply of gritty gravel from approved quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,
Cement concrete 1 : 4 : 8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete
Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4"and conveyance of all materials to site and all labour charges etc complete (below basement )
Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4"and conveyance of all materials to site and all labour charges etc complete( Above basement )
Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm x 60cm x and B.G 10 stiffened with M.S angles of size 25mm x 25mm x '3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.
Below basement
Above basement
Column
Plane service
Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.
Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.
Providing Granolethic floor finish in CM 1:2:4 mix using 10-12mm ISS HBG Metal to 25mm thick including cost and conveyance of all materials to site and all labour charges etc., complete complying with standard specifications and as directed by the departm
Paving the Floor with Vitrified tiles in CM 1:3 20mm thick including cost and conveyance of all materials to site and all labour charges etc complete
Paving the Floor with Ceramic tiles 305x305x6mm thick including cost and conveyance of all materials to site and all labour charges etc complete
Dadooing with glazed tiles of size 300x200x6mm including cost and conveyance of all materials to site and all labour charges etc complete
Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required size
Finishing the top of the roof with one course of Machine Pressed Tiles of size 23x23x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification
Plastering with CM 1:3,10mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete
Plastering with CM 1:5,12mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete
White washing two coats using shell lime inculding cost and conveyance of all materials to site and all labour charges etc complete
Distempering two coats over priming coat inculding cost and conveyance of all materials to site and all labour charges etc complete
Exterior emulsion two coats over priming coat inculding cost and conveyance of all materials to site and all labour charges etc complete
Fabrication and supply of mild Steel Doors, Windows, Ventilator & Jolly of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18
Fabrication and supply of mild Steel Doors, Windows, Ventilator & Jolly of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18
Fabrication and supply of mild Steel Doors, Windows, Ventilator & Jolly of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18
Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc (Manually operated) Upto 8 Sqm - SOR page 44 - 132 / A / a
Solid PVC door shutter using 19 gauge 19mm sq.tubes for styles and outer frames, 15mm MS sq tubes for top lock and bottom rails. The sheet tubes shall be covered with 5mm thick and solid PVC sheets including all charges etc., complete.
Fabrication and supply of steel grill gate using structural steel in all aspects as dirercted
Painting two coats over new iron works using ready mixed enamel paint inculding cost and conveyance of materials and all labour charges etc.,complete
Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T W Clamps, Plug, Shoes, bend, Screws, nails etc., complete
Provission for Eltrical arrengments
Light and Fan Point SD.18
Plug Point SD.38
Fan fitting SD.110
Service wire SD.66
EB Metre SD.125
EB Main Board SD.145
16 Amps Switch SD.142
5 Amps switch SD.136
Tube Ligh(4.40 W) SD.88
Earth Connection SD.71
CFL SD.80
Bulk Head Fiting CFL(11 W)
PVC sintex tank including all charges etc., complete
Supplying & Fixing in position of European waer closet with all fittings and 10 lit capacity flushing tank of approved quality including cost and conveance of all etc., complete
Supplying & Fixing in position of Indian type Water closet 580x440mm of approved quality including cost and conveance of all etc., complete
Supplying & Fixing RCC rings 900mm dia including cost and conveance of all etc., complete
Supplying & Fixing RCC slab of 900mm dia including cost and conveance of all etc., complete
Provision for Name Board
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
Selva Construction
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .