RENOVATION OF OFFICE BUILDING AND COLONY AT BARHAT UNDER IRRIGATION SUB DIVISION BARHAT UNDER IRRIGATION DIVISION LAXMIPUR

Jungle clearance in borrow area, building premises; flanks, slope of existing road and canal etc,embankment by removing the jungle , bushes from top including weeding out shrubs including roots and leveling complete job as per specifications and direction of E/I.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead:In cement mortar.

Desmantiling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrage, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sqm and below.

Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) (6.1.12.A).

12 mm cement plaster of mix:1:4(1 cement :4 coarse sand)

Applying one coat of cement primer of approved brand and manufacture on wall surface:Distemper primer .

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade New work (three or more coats)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.50 mm nominal outer dia Pipes .

Providing and fixing brass bib cock of approved quality :20 mm nominal bore.

Providing and fixing brass stop cock of approved quality 20 mm nominal bore .

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I brackets ,15 mm C.P brass pillar taps, 32 mm C.P brass waste of standard pattern ,including painting of fitting and brackets, cutting and making good the walls wherever require

Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavted soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. Details of cost for 10 cum

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified Mix of reinforced cement concrete excluding the cost of centring,shuttering.finishing and reinforcement-All work puto plinth level ,1:1:5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 20 mm nominal size)

Centring and shuttering including strutting,propping etc. and removal of form for. Foundations, footings, bases of columns etc. for mass concrete.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars (Fe-500) 10mm dia.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars (Fe-500) 12mm dia.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars (Fe-500) 8mm dia.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).local wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge 30 mm thick shutters.

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured)

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm daimeter bolts ,nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement:3 coarse sand :6 graded stone aggregate 20 mm nominal size )

Providing and fixing ISI marked ,IS:1341, MS heavy weight butt hings with necessary screws etc. complete.(9.56) size 120 mm x90 mm x 4 mm

Providing and fixing M.S. grills of required pattern in frames of doors, windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade new steel work (one or more coats)

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:New wood work (two or more coats) (13.82.2)

Cost of submersible pump set of KSB make having discharging 1.5 to 2 LPS at a total head of 10 m with suitable size of MSERW column pipe couple with 1 H.P submersible motor single phase and all necesaary equipments with all necesarry electrical and mechanical fittings

Carriage of construction materials from source to work site

SUB TOTAL (A)

ADD LABOUR CESS @ 1% OF WORK

Add S. Fee

SUB TOTAL( B )

ADD GST 18%

Grand Total

SAY, Rs.

IRRIGATION SUB DIVISION IRRIGATION SUB DIVISION

BARHAT, LAXMIPUR BARHAT , LAXMIPUR

TECHNICAL BID

Name of the contractor

Address of the contractor

Earnest Money

Bid Security Amount - ₹30000.00

Time of Completion

Registration No.

CHARACTER CERTIFICATE

Affidavit in required format (Should be after the publication date of the tender) as per letter no. 686 dated 19.08.2014)