REPAIR TO JOINERY, WIRE MESH, SHEET GLASS, PETTY REPAIR, SANITARY FITTINGS, BUILDING HARDWARE, PARKING SHED IN TECH AND ZONE-I AREA AT MIL STN JAISALMER

Amount

M&L for taking down shutters and refixing in same opening after necessary adjustment of Shutters of any description exc 1 Sqm and n exc 2 Sqm complete all as specified and directed by Engineer-in-charge.

M&L for resecuring or easing & adjusting without taking down Shutters of any description exc 1 Sqm and n exc 2 Sqm complete all as specified and directed by Engineer-in-charge.

M & L for taking down of Shutters of any description exc 2.00 sqm each and refixing in same opening after doing of necessary repair work such as greasing in hinges, wheels of shutters with other necessary repairs such as repairs/replacement of handles, locking system, hinges, bottom wheels etc whatever accessories are required for smooth functioning of gates complete all as specified and directed by Engineer-in-charge. Note : - The Rates for greasing in shutters whatever required to make Steel shutters fully functional (Opening and closing properly) are included in the item itself . No extra shall be paid for the same.

Taking down of shutters of any description of area exc 1.00 sqm but n. exc 2.00 Sqm each complete all as specified and directed by Engineer-in-charge.

Taking down of shutters of any description of area exc 2.00 sqm each complete all as specified and directed by Engineer-in-charge.

S&F Solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube suppling and fixing in opening as per specification and drawing.

S&F 30mm thick of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and directed by Engineer-in-charge.

M&L for Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-charge.

S&F Anodised Aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, 03 hinges, anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-charge.

M & L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, in repair complete all as specified and directed by Engineer-in-charge.

S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer-in-charge.

S&F 4.8mm thk Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane complete all as specified and directed by Engineer-in-charge.

S & F in repair, Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed by Engineer-in-charge.

S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed by Engineer-in-charge.

S & F 35mm thk Factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-charge.

S&F 35 mm thick Glazed and skeleton shutters second class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-charge.

S&F Mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and directed by Engineer-in-charge.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and directed by Engineer-in-charge.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-charge.

S&F in repair, Aluminium (Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-charge.

S&F 12 mm Prelaminated Particle board, exterior grade, prelaminated both side with decorative choice laminations fixed with screws to timber frame work and alumunium frame complete all as specified and directed by Engr-in-charge.

S & F in repair, 3.00mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed by Engineer-in-charge.

S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-charge.

M&L for preparation on new wooden surfaces over 10 cm width/girth and applying 2 coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-charge.

M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 with dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles) complete all as specified and directed by Engineer-in-charge.

M & L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 with dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles) complete all as specified and directed by Engineer-in-charge.

M & L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 etc with dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles) complete all as specified and directed by Engineer-in-charge.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing, removing serviceable tiles) complete all as specified and directed by Engineer-in-charge.

M&L for Parking ceramic tiles exterior grade 300 x 300 x 10mm including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engineer-in-charge. Make :-Johnson/Orient Bell/Somany or equivalent as specified in CA.

Formwork to chullah hoods, chajjas, troughs and similar items including edges, Rough finished surfaces complete all as specified and directed by Engineer-in-charge.

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-charge.

M & L for RCC (Nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in chajjas including demolition of reinforced cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-charge.

M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 including dismantling Trellis work (Jafri) one way, including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by Engineer-in-charge.

M& L for Providing precast cement concrete Type C1 (1:3:6) by using 20mm graded aggregate in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma?sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:6, complete with joints to match complete all as specified and directed by Engineer-in-charge.

M&L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde- E- 250) quality- A with dismantling of existing structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed by Engineer-in-charge.

M&L for Cement concrete Type D2 (1:4:8) using 40mm graded aggregate as in foundations, filling and mass concrete including demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminium zine coating GI based corrugated steel sheeting 0.50mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws including dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, all as specified & directed by Engr-in-charge. Note : (i) The fixing of Galvalume roof sheet as in sun-shades & in walls at certain places to be fixed by making of grooves cutting 75mm minimum with making good surface are inlcuded in the cost of item itself. No extra cost shall be paid for the same. (ii) The pattern and design of sunshades to be fixed complete all as specified and directed by Engineer-in-charge.

M&L for Preparation of new steel surfaces of any description over 10cm width or girth and application of two coats of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed by Engineer-in-charge.

S&F 500 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in position with 20mm bore dia ball brass valves high pressure, with polythene float and flynut screwed for iron pipe or brass ferrule, all as specified in SSR Part-I, complete including dismantling of existing tank complete all as specified and directed by Engineer-in-charge.

S&F 1000 ltrs capacity white colour three layer rotational moulded polythene water storage tank (Cylinderical vertical with closed top) hoisted and fixed in position with 20mm bore dia ball brass valves high pressure, with polythene float and flynut screwed for iron pipe or brass ferrule, all as specified in SSR Part-I, complete including dismantling of existing tank complete all as specified and directed by Engineer-in-charge.

S & F in repair 20mm bore dia ball brass valves high pressure ,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm dia Bib taps cast copper alloy chromium plated with crown or capstan head, screwed down, high pressure screwed for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repair, Vitreous china wash basin pedestal type, white, flat back, size 550 X 400 mm excluding taps, chain and plug and porcelain stopper but including CP waste coupling & brackets and fixed complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm dia Pillar taps cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repair of Orissa pattern vitreous china squatting pan white of size 580x440mm with integral footrest (Excluding flushing cistern and flush pipes) but including concrete bedding and P or S trap as required including PVC pipe up to finished floor level to connect flush pipe, making good all the disturbed surfaces to match the adjoining complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china wash down water closet pedestal pattern including connecting to flush tank, complete all as specified and directed by Engineer-in-charge.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern with inlet, ball valve, float, handle including fitting and fixtures and taking down the old damaged cisterns and providing connections to WC and flush pipe without any damage to the existing fittings complete all as specified and directed by Engineer-in-charge.

S&F in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-charge.

S&F 15mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc including taking down of old existing GI tubing complete all as specified and directed by Engineer-in-charge.

S&F in repairs of harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed by Engineer-in-charge.

S&F in repairs tubular towel rail Aluminium anodised 20mm dia D type 60cm long complete all as specified and directed by Engineer-in-charge.

S&F in repair, PVC connection pipe 15mm dia, 600mm long with PTMT check nuts and washer on both ends complete all as specified and directed by Engineer-in-charge.

M & L Precast cement concrete block masonry with solid blocks PCC Type C1 (1:3:6) (using 20mm graded aggregate) exc 10cm in width and setting in CM 1:6 with demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and directed by Engineer-in-charge.

M &L Squared rubble walling Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:6 including with demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc complete all as specified and directed by Engineer-in-charge.

Extra over to stone walling for hammer dressing to face stones and dressing of the face beds & joints as specified of squared rubble walling regular coursed, Jodhpur type, with maximum depression of face from straight edge held against the dressed surface n.exc. 20mm complete all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick on stone masonry surface in cement mortar 1:4 including water proofing compound and finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick on stone masonry surface in cement mortar 1:4 including water proofing compound and finished even & smooth without using extra cement with taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-charge.

M&L for rendering 10 mm thick plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls and finishing the surface even and smooth without using extra cement with taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-charge.

M&L for rendering 5 mm thick in CM (1:3) on fair faces of concrete surfaces as in ceiling finished even and smooth without using extra cement including raking out joints, hacking for key, scrubbing down with water, etccomplete all as specified and directed by Engineer-in-charge. Note :- Rates of Scaffolding/Staging for plaster work in ceiling as per site requirement are included in the item itself. No extra cost shall be paid for the same.

M&L for prepration of new plastered wall surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of Plastic emulsion paint over a priming paints plaster coat complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over chalk whiting on plastered surfaces, preparatory to distempering complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engineer-in-charge.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over with 25mm thick sand cushioning over 75mm thick PCC type D2 (1:4:8) using 40mm graded aggregate as in subbase of flooring/hardstanding including demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) , complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.

M&L 75 mm thick PCC 1:3:6, type C1 (using 20mm graded stone aggregate) in plinth protection and path, Ramp laid in alternative bays finished even and smooth without using extra cement, complete all as specified and directed including demolition of concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-charge.

S & F in repairs, 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed by Engineer-in-charge.

S & F in repairs, Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site with 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing including taking down of existing wall panelling and similar work complete all as specified and directed by Engineer-in-charge.

AMBEY MAA CONSTRUCTION COMPANY

Vinay Traders

GEMRARAMCONTRACTOR

JASOL MAA ENTERPRISES

M/s Shri Inder Construction Company

S K TRADER