REPAIR TO RUNWAY SURFACE DISPERSAL PTT BY USING PME AND MOSS REMOVAL AT INS HANSA UNDER GE NW VASCO

M&L for preparation of old black top surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with air blower to remove loose dirt etc. complete and apply cold polymer modified emulsion (PME) by using mechanical spraying of total cold liquid PME 1 ltr per sqm (undiluted) for two coats with mineral filler as recommended by manufacturer of PME (after diluting with water), each coat diluted in the ratio 1:1 (PME: WATER) and ensure uniform finish of applied flight strips complete all as per manufactcurer instructions all as specified and directed by Engr-in-Charge

Removel of conflict paint , markings on Apron & runway surface using water blasting cum vacuuming system with suitable operating pressure so that total paint removed from runway both (rigid & flexible) surfaces without damaging the existing surface using SH 5000 StripeHog machine or equivalant machine all as specified and as directed by Engr-in-Charge.

Removal of Moss/ Algae deposits on Apron and Runway surface using water blasting cum vacuuming system with suitable operating pressure using SH 5000 stripeHog machine or equivalent machine all as specified and directed by Engr-in-Charge