Painting and Repairing work of office compus at Havlock Road, Lucknow. (Lot-5)

Amount

Dismantling cement concrete or brick or granolithic floors, including base concrete and including stacking of dismantled materials as directed by Engineer-in-charge with in a distance of 60 meters. As in item 697 above but floors to be stone flagged or tiled floor.

Dismantling doors & windows, Chaukhats with hold fast & including stacking of materials as directed by the Engineer-in-charge with in a distance of 60 meters (200ft.)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1: 1.5 : 3 ( 1 cement 1.50 coarse sand 3 graded stone aggregate 20 mm nominal size )

Brick work with common burnt clay non modular bricks of class 150 in superstructure above plinth level up to floor V level in all shapes and sizes Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix 1:4 ( 1 Cement : 4 Coarse Sand)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engieer-in- Charge. with cement mortar 1:4 ( 1 Cement : 4 Coarse Sand)

Scraping old white or colour wash including disposal of refuse as directed by Engineer-in-charge with in a distance of 60m.

Providing and appling plaster of putty 2mm thickness over plasterd surface to prepare the surface even and smooth complete.

One priming coat and two coat oil bound distemper including supply of all materials, labour and T&P etc.required for proper completion of work.

Finishing walls with Premium Acrylic Smooth Exterior Paint with Silicone additives of required shade: New work (One or more coat applied@ 1.43 Lt/10 sqm) over and including priming coat of exterior primer applied @2.20 kg/10 sqm (apex Ultima, weather coat all guard) Asian, berger.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622, of approved make, in all colours and shades, except white, lvory, Grey, Fume Red Brown laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 Coarse sand), jointing with grey cement slueey @ 3.3 Kg/sqm including pointing the joints with white cment and matching pigments etc, complete.

Providing andfising 1 qualiity ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, botlle green, black or any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cment mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cment slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flusing cistern with standard flush pipe and CP brass spreaders with brass urions and GI clamps complete, including painting or fittings and brackets, cutting and making good the walls and floors wherever required. One urinal basin with 5 liter white PVC automatic flusing cistern

Supply & fixing of anodised/aluminium portion having 2 mm thick aluminium section excluding coating & an average coating of 20 micron fully glazed made of aluminium door tube size 83.5x44.65 mm as vertical member & 114.00 x 44.45 mm size tube in bottom and horizontal members door chaukhat should be of aluminium tublar vertical with two openable shutters. The rate will include cost of material fixtures, 5 mm glass handles, locks, screw necessary beading & excluding cost of floor spring if required for proper completion of work as per direction of Engineer-in-charge.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Polyester powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7)

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or Wuropean type water closet (Anglo Indian WC pan) with seat & lid fixed with CP brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. white vireous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and CP flush bend.

Providing and fixing 8 mm dia CP/SS jet with flexible tube upto 1 meter long with SS Triangular plate to Eueopean Type WC of Quality and make as approved by Engineer-in-Charge.

Providing and fixing wash basin with CI brackets, 15 mm CP brass pillar taps, 32 mm cp brass waste of standard paattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with a pair of 15 mm CP brass pillar taps

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore.

Providing and fixing PVC waste pipe for sink or wash basin including PVC wast fittings complete 32 mm dia / 40 mm dia

Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

Providing & fixing C.P. brass bib cock of approved quality conforming to IS : 8931. a) 15mm nominal bore

Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 a) 15mm nominal bore

Providing and fixing soil, waste and vent pipes 100 mm dia Hubless centrifugally cat (Spun) iron pipes epoxy coated inside & outside IS:15905

Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials ,labour, T&P etc required for proper completion of work .(Paint to be used should confirm to the ISI no -103-1950.)

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 liter/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/liter and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorized applicator of the manufacturer of membrane : Rate as per DSR-2021 Code -14.90.1

m/s mohd. zamil

BHAJAN LAL