Fabrication, providing and fitting of base frame and foundation block along with allied works at Lift Irrigation Station, Nikowal new.

Amount

Fabrication of base frame of Pumping Unit No. 01 at LIS Nikowal new . complete dismantling of pumping unit from the suction and delivery lines by cutting of damaged / worn-out nuts and bolts using blade cutter and manual labour, and then de-coupling the pump and the motor, removing the electrical connections from the motor by means of removal of insulations and then removal of nuts and bolts from the connection thimbles using appropriate tool spanners and dismantling the pump and motor individually from the base frame, cutting damaged / worn-out nuts and bolts with the help of blade cutter, manual labour and then lifting of pump and motor with the help of chain pulley block using manual labour from its position and then removing the base frame from the foundation by means of cutting of damaged / worn-out foundation nuts and bolts using suitable cutting arrangement. Complete dismantling of existing damaged / rusted base frame from the foundation by way of cutting of damaged / worn-out nuts and bolts using cutter, manual labour and then breaking half of the existing foundation using jack hammer, manual labour and then extraction of old RCC foundation material using manual labour and dumping the material with a lead of 50 m from the pump room at position where irrigation land is not polluted using manual labour on head load. fabrication of new base frame by means of providing and fitting of 8 inch ISMC channel and fabrication of base frame (84 inch length x 22 inches width) by means of welding the ISMC channels to form the base frame as per the site requirement . The job includes providing and fabrication of base support for motor and pump with height as per alignment of pump and motor. Drilling of holes for foundation bolts on base frame. Job also includes providing and fixing of new foundation bolts of appropriate size for fixing the new base frame by means of welding the base of foundation bolts with excavated RCC and then filling of the dismantled excavated foundation with the RCC mix in the ratio of 1:1.5:3 and then curing the foundation for at least 05 days. Providing and laying of 10 mm Tmt mesh. Filling of the foundation with RCC mix in ratio of 1:1.5:3, setting and curing it for 05 days. Job also includes re-installation of pumping unit on the base frame by means of lifting and fixing of pump and motor using chain pulley block with the help of manual labour and installation of pump, motor on the base frame with the help of nuts and bolts of appropriate size. Complete job includes cost of skilled / semi-skilled labour, material, tools & tackle, carriage charges to lift irrigation station on head load, charges for civil work. Note:- The Tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.

Providing and fitting of 70 sq mm copper cable from motor to starter-40 meters, dividing of cable in 6 equal parts and thimbling the copper cables with 70 sq mm copper thimbles with help of crimping tool and cover the flexible copper cable with heavy duty PVC sleeve. The job includes covering the cables with PVC conduit pipe. Making connections from starter to motor.

GANPATI ELECTRICAL AND MECHANICAL WORKS

Amit Electrical and Engineering Works