REPAIRS MAINT TO FOOTHPATH HARDSTANDING FENCING GATES PILLARS PERIPHERY AND COMPOUND WALLS GARBAGE BINS AT JALIPA MIL STN UNDER GE ARMY BARMER

Amount

M&L for demolition of brickwork or stone/ boulder masonry, built in cement mortar, incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted masonary built in CM 1:6 including hammer dressing complete all as specified and directed.

All as per srl item No 04 but except stone complete all as specified and directed.

M&L for raised pointing to rubble or polygonal rubble, uncoursed or brought up to coarse with CM 1:3 complete all as specified and directed.

Material and labour for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width type C1 1:3:6 (20 mm graded aggregate) and setting in mortar CM 1:6, complete all as specified and directed.

M&L for brickwork with old size fly ash bricks, for masonry straight or curved on plan exc 6m mean radius, built in and setting in mortar 1:4 complete all as specified and directed.

M&L for concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed.

Material and labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete all as specified and directed.

M&L for taking down cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick cement mortar in 1:4 on fair faces of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and directed.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of cement base paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for preparation of old decorated wall surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and effloroscent salts, trading oil and greasy spots and applying one coat of cement based paint on walls complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls including filling of cracks/holes by crack filler, removing unnecessary nails and applying one coat of oil bound distemper/ emulsion complete all as specified and directed.

M&L for preparation of old painted cement, plaster surfaces of any description over 10cm in girth or width and painting with two coats of plastic emulsion complete all as specified and directed.

M&L for dismantiling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

S&F steel work in tubular trusses, post, purlin, rafter including special shaped washer, post etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410-W (Gde E-250) quality A, complete all as specified and directed.

M&L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed.

M&L for extra forming fair finished drain or channel up to 55 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed.

M&L for demolition of concrete of any description (reinforced) and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) set in CM 1:4 in cover slabs (for man holes etc.) and similar articles with plain faces complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8, type D-2 (40mm graded aggregate) as in floors, hardstanding complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:2:4, type B-1 (20mm graded aggregate) as in floors, hardstanding without using extra cement complete all as specified and directed.

M&L for sand filling under floors as in sand cushion for laying paver blocks including water and consolidation complete all as specified and directed.

M&L for machine pressed rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed.

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed in neat cement slurry in floors with grey pigment cement and pigments complete all as specified and directed.

M&L for 300x300x10mm thick non skid parking floor glosy finish paver tiles with grey cement and pigment over and including 15mm thick screed in cm(1:4) , set joinet and pointed in neat cement slurry in floors concrete complete all as specified and directed.

M&L for RCC (Nominal) type B1 1:2:4 20mm graded concrete as in foundations, plinth beams, bases for columns, etc basement slabs, under-reamed piles, post holes and mass concrete complete all as specified and directed.

M&L for dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, brickwork, masonary etc. including taking out embedded portion and making good disturbed ground complete all as specified and directed.

M&L for dismantling fencing wire mesh, any type complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in foundation filling in post holes complete all as specified and directed.

S&F MS works in posts and struts in fencing including cutting tops to shape directed, drilling holes, including all necessary drilling, bolting or reveting, etc, and similar wark conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for 25x6mm thick flat iron fillets fixed to the fencing posts incl all necessary drilling bolting or riveting etc and similar work conforming ot Fe 410-0 or Fe 310-0 complete all as specified and directed.

Supply only chain link fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, starining bolts, etc. including provission of binding wire complete all as specified and directed.

S&F 12 mm dia mild screw bolts machine made with hexagonal or square heads at one end and screwed the other, or screwed on both ends each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt exc 10cm but n exc 15cm long complete all as specified and directed.

M&L for dismantling barbed wire fencing of any description complete all as specified and directed.

S&F galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing and straining and fixing to any type of strandard rails straning bolts, incl, securing or tying at crossings with and provision of galvanised mild steel, wire staples or steel pins etc complete all as specified and directed. (each line wire to be measured separately).

M&L for restraining and rescuring including making good staple of galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing andincluding securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc complete all as specified and directed. (Each line wire to be measured separately).

M&L for preparing new steel surfaces of any description, over 10cm in width/girth, applying two coats of synthethic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in same opening after cutting by chishel or hand saw, peeling by plane, fixing/ re-placing of hinges, repairing etc including all nales screws, pieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames, shutters, etc. including painting or oiling to match, if required complete all as specified and directed. (Note : Hinges shall be measured and paid separately)

M&L for taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each and refixing old shutter in the same opening after replacing the chowkats or frames complete all as specified and directed. (Note : Chowkats or frames shall be measured and paid separately)

M&L for taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

M&L for taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and directed.

M&L for taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S&F pressed steel frames of size 165X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate etc complete all as specified and directed.

S&F pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs. hinges, lock strike plate etc complete all as specified and directed.

S&F 35mm thick flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and directed.

S&F 35mm thick 2nd class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) , kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars) , edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L for hacking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and directed.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples of any type of windows and doors i.e. wooden, steel or aluminium including opening and refixing of frame, shutter or shutter elements if required and new wooden beads in wooden doors complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and directed.

S&F 150mm size aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size aluminium anodized handle complete all as specified and directed.

M&L for 300mm size aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 140mm length aluminium floor door stoppers double legged with hard drawn steel spring fitted in floor complete all as specified and directed.

S&F in repair 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and directed.

S&F in repair 150mm size aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 150mm size aluminium anodized handle complete all as specified and directed.

M&L for in repair 250mm size aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repair 150mm size mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F in repair 150mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

M&L for in repair 250mm size mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F in repair 140mm length aluminium floor door stoppers double legged with hard drawn steel spring fitted in floor complete all as specified and directed.

S&F in repair 25mm dia stainless steel curtain rod with fancy type fixing brackets, stops, rollers, lattu etc. complete all as specified and directed. (Note : Entire work will be done/ executed in patches of any qty and any size all as specified )

M&L for dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including fillets complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

M&L for dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves andscrews at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section(not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

M&L for dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed.

S&F Pre-laminated galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering in any curvature, fixed with self tapping screws complete all as specified and directed.

M&L for returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in hard/dense soil complete all as specified and directed.

M&L for removing excavated material n, exc 50 Mtr and depositing where directed at a level of n, exc 1.5 m above the strating point in soil complete all as specified and directed.

M&L for removing building materials etc, exc 5 km to a distance 10 km or under by tractor and trolley, outside the defence land included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

M&L for demolition of precast 25mm thick rcc louvers and jallies fixed with cement mortar complete all as specified and directed.

M&L for 35mm thick precast cement concrete louvres and jallies type C-0 (1:3:6) using 12.5mm graded stone aggregate (measured solid), including all mouldings and frame set in cement mortar 1:4 complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using (20mm aggreates) for RCC pillars, RCC band (Reinforcement will be measured and paid separately) including demolition of cement concrete (reinforced) in, (below or above ground level) all as specified and directed.

M&L formwork to sides of flat rough finished surfaces of concrete foundations, footings, bases of columns, columns, beams, slabs, roof slab, lintel, chajjas and similar work; (leak proof type) vertical, horizointal or to batter complete all as specified and directed .

S&F for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

M&L for repair and fixing stainless steel (Grade 304) railing with chain made of hollow tubes,channels,platesetc.,includingwelding,grinding,buffing,polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

Supply & fixed in repair aluminium composite panel not less than 3.0 mm thick and including covered both side by encapsulated lens type retro reflective sheet (grade 3 M type II diamond grade of make 3M/dark eye/ SNI) any colour base,with and including all type and any size of writting letters and symbols of reflective type complete all as specified and directed.

S&F for stainless steel letters (any from A to Z) 600 mm height, 25mm width and 25mm depth made of 0.79 mm thick (22 gauges) stainless steel 304 grade with seemless welding rubbed polished (Golden/Silver/Rose Gold) and edges made smooth with necessary fixing devices like SS screws or as per manufactur's instruction to fixed on ACP sheet,wall or stone complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed .

M/s Malinath Electricals (BID ID -3194845)

Devi Engineeing (BID ID -3194575)

M/S Tanisha Traders (BID ID -3194484)

Lalit and Brothers (BID ID -3191104)

AMBEY MAA CONSTRUCTION COMPANY (BID ID -3194510)

National Rewinding Works (BID ID -3194958)

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3194733)

M/s Sati Jasnath Enterprises (BID ID -3194810)

S.K. INFRASTRUCTURE (BID ID -3194961)

m/s sai construction company,bijarar (BID ID -3195174)

Paliwal Construction Company (BID ID -3194881)