Laying of wiring and fixing of Energex meter to municipal complex market to byd tmc limit

Laying of wiring and fixing of Energex meter to municipal complex market to byd tmc limit

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to I...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade multi strand and copper wire with low conductor resistance single core in open or concealed system of wiringwithspecifiedI...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade multi strand and copper wire with low conductor resistance single core in open or concealed system of wiringwithspecifiedI...

Wiring for Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed systemof wiringwithspeci...

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 129332A DP Switch (PWD Ele SR 2-23-24 P.No 9 I.No 3.6.9)

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete.12" x 12" x 3" (...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32 A. As per PWD SR-2-2023-24 SL.No-5.7.2 Page No-14

Supplying & fixing miniature circuit breakers on existing

MCB distribution boards using necessary fixing materials

and 'C' Type curve, indicator ON/OFF, energy cross-3 with

Short circuit breaking capa...

Suppying and fixing PBBC bakelite stright or slant bateen holder and wiring with 60w/230 volts lamps. page No.20, Item no:4.2, As Per Pwd SR 2014-15

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall P...

wiring for lighting/power circuit using one of PVC insulated 1100v grade standed aluminium unsheathed wire single core/ multi core cable in open or concealated system of wiring. As Per Pwd SR 2019-20 ...

Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water ...

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter.PWD Ele SR 2-23-24 P No 14 I no 5.30 )

1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 PVC Wire - 6 SqmmWeight per 100 Mtr Coil: 3.5 Kg ( PWD Ele SR 2-23-24 Bescom part III P N...

1.1 kV, XLPE or Heat resistant PVC insulated, PVC extracted Inner Sheath Armored LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armoring strip thickness and resistivity as per IS-3975 25 sqmm3....

GI Grounding pipe, B - Class, 42 mm dia2.5 MT long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg (PWD SR 2-23-24 Bascom part III P No 17 I no 54.01 ) el...

Good Quality well burnt Charcoal for grounding

purposes packed in non returnable gunny bag of 30 Kg

each (PWD Ele SR 2-23-24 Bescom part III P No 17 I no 54.02 )

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag (PWD Ele SR 2-23-24 Bescom part III P No 17 I no 54.03 )

Digging of Pit for providing GI Pipe type Earthing Hard Soil (PWD El SR 2-23-24 Bascom part IVP No 01 I no 1.6.2

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...