REPAIR CLEANING OF SWT GARBAGE BINS STONE CLADDING MS SS FRAME WORKS AND CERTAIN BR WORKS IN DOMESTIC AREA UNDER GE AF ADM AREA GWALIOR

Amount

M&L, for pumping /bailing out water mixed with minor silt particles, scales and such like foreign material from static water tanks manually or mechanically and throwing it to open drains complete all as specified and directed.

M&L for taking out sludge including all foreign materials such as sand, grit, fibers, rages etc in semi liquid /solid form from the base of S.W.T after dewatering /emptying the S.W.T either manually or mechanically. The sludge is to be disposed off to a distance n less than 1.5 Km from the starting point complete all as specified and directed.

M&L, for scrapping the sides and base of S.W.T against all loose scales, minor vegetation and cleaning, rubbing down with water to remove dust etc.

Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level and removing the debris to a distance not exc 2.5 Km from the starting point.

M&L, 50mm thick cement concrete 1:2:4 type B-I using 20mm graded stone aggregates mixed with water proofing compund as per manufacturer instruction finished even and smooth in floors. Note :- Water proofing compound shall be measure and paid saperatly under respective items

Preparation of new plastered/concrete surfaces and applying two coat of water proof coating, external wall water proofing coating over a coat of primer (make of primer and paint should be same manufacturer) on walls complete all as specified and directed

Taking down cement / lime plaster on brick or concrete surfaces etc including racking out joint, hacking for key scrubbing down with water etc.complete all as specified.

M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surface finished fair & even without using extra cement complete al as specified.

Ditto all as per srl item No. 8 above but in cement mortar 1:3 mixed with water proofing compund as per manufacturer instruction finished even and smooth in floors. Note :- Water proofing compound shall be measure and paid saperatly under respective items

Preparation of new plastered wall surfaces and applying two coat of cement base paint over a coat of primer of same make on walls complete all as specified and directed

Supply only liquid water proofing compound complete all as specified and directed

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed

M&L Mild steel work wire netting of galvanised steel wire, 1.40mm dia and 25 mm dia aparature etc complete all as specified.

Surface Excavation not exceeding 30 CM deep and averaging 15 Cm deep and getting out in Soft/ Hard soil etc complee all as specified.

M&L hardcore of gauge n exc. 63mm broken stone , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc,complete all as specified.

M&L for Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation,mass concrete and fillings complete all as specified.

M & L for 50mm thick sand filling under floors or in foundations including watering and consolidation all as specified and directed.

M&L for Machine pressed preacast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS 15658-2006 of 80 mm thickness etc all as specified and directed.

M & L for poviding cement concrete type B1 1:2:4 (20mm graded aggregate ) on roof kerbs and like rounded or chamferred on edges etc, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level exc.500 m but not exc 1.5.00 Km above the starting point etc, all as specified

M&L, two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

All as per sl item No. 22 but embedded on natural ground complete all as specified and directed

Dismantling fencing wire mesh,any type,complete all as specified and directed.

M&L cement concrete type C2, 1:3:6 (40mm graded aggregate) as in foundation and mass concrete complete all as specified and directed.

S & F for posts and struts in fencing (size angle iron of size 65X65X6 mm) including cutting tops to shape as directed, drilling holes, notching for wire, etc. and flat iron fillets (size of flat iron of size 40 x6mm) for securing wire mesh etc) fixed independently as in fencing post and struts fut to shape as directed drilling including all necessary drilling bating or venting etc conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.complete all as specified and directed

M & L for preparing steel and ifon surfaces new or old of any description and girth not such as holdfast end of post etc0.10 Sqm but not exc 0.50 Sqm and treated with tar of coal tar black paint complete all as specified and directed

M&L one coat of synthetic enamel paint over old painted surface of steel work of any description over 10 cm width or girth including preparation of old surfaces complete all as specified and directed.

Supply only Gl Chain link fencing including line wire with galvanised wire hot dipped(IS-2721) of 4 mm dia and mesh of size 100 X100 complete all as specifed and directed

Fixing only chain link fecncing incl line wires any mesh size and type to any type of standard, rails, straining bolts etc incl provision of binding wire all as specified and directed.

S&F Mild steel nut and bolts not less than 12 mm dia machine made with hexaganal or square heads at one end screwed the other to be fitted with washers and one hexagonal or square nut not exc 6cm long @ 450 mm centre to centre all as specified and directed.

M&L for framed work of stainless steel as in grill, railings for water tanks and similar work of design and section of stainless steel as approved by GE with ends of bar shouldered or rebated, or forged into spikes. The frame work is to be secured in the existing RCC/Brick work with necessary fasteing arrangements as per manufacturers instructions to suit the site requirement complete all as specified and directed

S&F for 16 to 18mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone of size not exceeding 0.25 sqm fixed with and including, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment etc complete all as specified and directed.

M&L for dholpur sand base stone 300 mm wide of thickness 30 mm etc and laidover cement screed base 20mm thick in CM 1:6 complete all as specified and directed .

S&F Dholpur sand stone jallies 25 to 30 mm thick with cement mortar (1:4), machine cut edge,uniform colour of each stone jallies of size 3' x 2' fixed in between the post design as approved etc, complite all as specified.

S&F Dholpur sand stone carving post of section not less than 3''x3'' of design as approved be GE of length 0.70m to 1.00m fixed in base stone complete all as specified and directed.

Demolition of brick work built in cement mortar and incl all quoins, arches, pillars etc complete all as specified and directed

M&L brick work with sub class ‘B’ modular bricks straight or curved o plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed.

~ditto~ all as per srl item No. 38 above but except brick.

Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material upto 2.5 KM distance and depositing where as directed, complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding but not backing & rubbish off the premises complete all as specified and as directed.

M&L for non skid coloured/printed ceramic tiles 7-8 mm thick area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed or bedding layer 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L glazed ceramic tiles (450X300 mm size) 6-7 mm thick coloured for work on vertical surfaces such as skirting and dado/riser etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces as in backing for tiles in dados/skirting complete all as specified and as directed.

Taking down of cement plaster inculding wall finishes in any description on brick or stone wall etc., incl hacking out joints for key scrubbing down with water etc. all as specified and directed

M&L 15mm thick rendering in CM 1:4 on fair faces of bricks, finished even & smooth without using extra cement and mixed with water proofing compund as per manufacturer instruction etc, complete all as specified and as directed. Note :- Water proofing compound shall be measure and paid saperatly under respective items.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Dismantling of timber scantling 40 Sqm in section and over in any position (unframed) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provideed etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zince coating GI based semi corrugated steel sheet 0.50 mm thick of an approved colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F Pre-painted galvalume aluminium zince coating GI based semi plain steel sheet 0.50 mm thick of an approved colour having tensile strength of 550 mpa as in ridge, fixed with self tapping screws all as specified and directed.

S&F mild steel as in Roof trusses (framed), trussed,purlins, rafter, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats,gusset and bearing plates etc complete all as specified and as directed.

S&F in repair for HPSC pre-prime non asbestos fiber cement building board (E-classic) decorative finish fixed to aluminum or MS galvanised snap grid frame work with hold down clips in ceiling complete all as specified and directed.

S&F in repair suspended false ceiling grid system 600 x 600 mm with main runner 32 x 24 x 0.8 mm, cross tee 26 x 24x 0.80 mm and wall angle 22.2 x 22.2 x 0.65 mm in ceiling suspended @ 1.2m c/c both way with 1.60 mm dia GI wire fixed with steel dash fasterers or from purlin of roof with butterfly clips hold down etc, complete (main runner/ cross tee / wall angle of MS powder coated) as per manufacturere instruction complete all as specified and directed.

S&F in repairs 1mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws,clout nails or rivetsand fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of white wash, complete all as specified and directed.

Preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying one coat of cement base paint, complete all as specified and directed.

Preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying one coat of exterior emulsion wall paint (Ace paint from Asian paint or other brand Berger Shalimar paint) on bands/facia of external wall surface of brick work or concrete wall etc, complete all as specified and directed.

M/S ARVIND SINGH THEKEDAR

RADHA MADHAV CONSTRUCTIONS

GWALIOR TRADE LINK

GURU KIRTH BUILDERS

M/s Anupam Construction Co.

USHA TRADERS

J.N.R. Engineers and Builders

YASH DEVELOPERS AND CONSTRUCTION COMPANY

M/s. Ravi and brothers

M/s Shubham Construction Co.