Estimate for Supply, erection and commissioning of various electromechanical equipment like VT Pump, Electric Motors, LTDB Panel and other allied material at PH 1 to 5 JC

Amount

Supply, erection and commissioning of 10 Cs. V.T. Axial flow pumps of 1440 RPM, having static lift of 13 feet, including 12 meter (6+6) delivery pipe as per actual site requirement and MS delivery bends of minimum 8 mm thickness with bituminous based paint inside & outside including flange welding, HT nut-bolts, Siphon Breaker Valve, complete in all respect, as per site and as per approved technical specifications. (For PH No. 1 J/C ).

Supply, erection and commissioning of 5 Cs. V.T. Axial flow pumps of 1440 RPM, having static lift of 13 feet, including delivery pipe as per actual site requirement and MS delivery bends of minimum 8 mm thickness with bituminous based paint inside & outside including flange welding, nut-bolts, Siphon Breaker Valve, complete in all respect, as per site and as per approved technical specifications (For PH No. 1,2,3 J/C)

Supply, erection and commissioning of 20 Cs. V.T. Axial flow pumps of 970 RPM, having static Lift 13 feet, including delivery pipe as per actual site requirement and MS delivery bends of minimum 8 mm thickness with bituminous based paint inside & outside including flange welding, nut-bolts, Siphon Breaker Valve, complete in all respect, as per site and as per approved technical specifications (For PH No. 1 Jui Canal )

Supply, erection and commissioning of solid shaft motor of capacity 50 HP of 4 pole, 1440 RPM, 3 phase 415 Volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 10 Cs. VT Axial flow pumps with 13 feet lift type vertical flange mounted & as per approved technical specification with earthing of motor (PH-1 J/C).

Supply, erection and commissioning of solid shaft motor of capacity 30 HP of 4 pole, 1440 RPM, 3 phase 415 Volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 5 Cs VT Axial flow pumps with 13 feet lift type vertical flange mounted & as per approved technical specification with earthing of motor (For PH-1,2,3 J/C)

Supply, erection and commissioning of solid shaft motor of capacity 100 HP of 6 pole, 970 RPM, 3 phase 415 Volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 20 Cs VT Axial flow pumps with 13 feet lift type vertical flange mounted & as per approved technical specification with earthing of motor (For PH No. 1 Jui Canal ).

Supply, erection and commissioning of 50HP Fully Automatic ATS Starter with MCCB of 250 Amp. Capacity with all accessories along with an-addl. MCCB of 63 Amp. for lighting loads, Indicators, Relay, Meters, Push buttons, bus bars, timers etc. with contactor rating as 110, 80, 50 Amp. with first filling of oil (if oil cooled ATS used) starter should have individual capacitor bank of 25 KVAR capacity coupled through 63 Amp. MCCB and timer with digital display instruments & other allied accessories for automatic as well as manual operation, complete in all respect with a stand of MS Channel (1feet up from floor) with latest amendments suitable for 10 Cs. Axial flow pumps and as per approved technical specifications With earthing. (For PH-1 J/C)

Supply, erection and commissioning of 30HP Fully Automatic ATS Starter with MCCB of 160 Amp. Capacity with all accessories along with an-addl. MCCB of 63 Amp. for lighting loads, Indicators, Relay, Meters, Push buttons, bus bars, timers etc. with contactor rating as 110, 80, 40 Amp. with first filling of oil (if oil cooled ATS used) starter should have individual capacitor bank of 16 KVAR capacity coupled through 63 Amp. MCCB and timer with digital display instruments & other allied accessories for automatic as well as manual operation, complete in all respect with a stand of MS Channel (1feet up from floor) with latest amendments suitable for 5 Cs. Axial flow pumps and as per approved technical specifications With earthing(For PH No. 1,2,3 Jui Canal)

Supply, erection and commissioning of 100 HP Fully 1 No. Automatic ATS Starter with a MCCB of 400 amp. with main contactor of 300 amp., tapping contactor of 200 amp and star of 110 amp for 100 HP Motor with ATS with degree of protection IP 54 including connection and items as suitable capacitor bank, bush bar, push button, relays, meter, thimbles, nut/bolt, lugs, etc. complete in all respect with a stand of MS Channel (1feet up from floor) with latest amendments suitable for 20 Cs. Axial flow pumps and as per approved technical specifications. (For PH No. 1 Jui Canal ).

Supply, erection and commissioning of 225 HP Fully Automatic ATS Starter with MCCB of 630 Amp. Capacity with all accessories along with an-addl. MCCB of 100 Amp. for lighting loads, Indicators, Relay, Meters, Push buttons, bus bars, timers etc. with contactor rating as 550,400, 300 Amp. with first filling of oil (if oil cooled ATS used) starter should have individual capacitor bank of 100 KVAR capacity coupled through 100 Amp. MCCB and timer with digital display instruments & other allied accessories for automatic as well as manual operation, complete in all respect with a stand of MS Channel (1feet up from floor) with latest amendments suitable for 50 Cs. Axial flow pumps and as per approved technical specifications With earthing. (For PH No. 1, 2 J/C ).

Supply, erection and commissioning of MCC Panel of 1600 Amp. Capacity with all accessories as one incomer ACB 4 pole 1600 Amp. with 3 No. outgoing each of having MCCB of 630 Amp. alongwith an addl. MCCB of 100 Amp. for lighting loads, Indicators, Relay, Meters, Push buttons, bus bars to be connected with Item at 11(a) with suitable capacitor bank 300 KVAR with 8 step APFCR, digital display instruments & other allied accessories for running of 3 Nos. 225 HP motors. Each Stage should have protection through separate MCCB as per approved design of LTDB panel with a stand of MS Channel ( 1.5 ft. Up from floor) & as per approved technical specification with earthing. (For PH No. 3 Jui Canal)

Fully Automatic ATS Starters 225 HP (Completed in all respect like relays, indicators timer etc.). with suitable contactors rating with first filling of oil (if oil cooled ATS used) (For PH No. 3 Jui Canal)

Supply, erection and commissioning of 50 Cs. V.T. Axial flow pumps of 585 RPM, having static Lift 13 feet, including delivery pipe as per actual site requirement and MS delivery bends of minimum 8 mm thickness with bituminous based paint inside & outside including flange welding, nut-bolts, Siphon Breaker Valve, complete in all respect, as per site and as per approved technical specifications (For PH No. 3 Jui Canal ).

Dry type Cast Resin Voltage Step Down System ( X’mer, Shunt Capacitor Bank with reactor 200 kVar, VCB Panel I/O, 11 kv cable from Pole to VCB Panel & VCB to Transformer, LA (pole) with counter, LA(line), foundation for X'mer, Chemical Earthing (Neutral = 2 Nos. Body = 2 Nos., Pole & GO switch = 1 No., LA = 3 nos. VCB Panel = 2 Nos.), Stone pitching, fencing, Laying of HDPE pipe for cables, GO switch & Termination Kits) for 11/.433kV having Capacity of 1.6 MVA with transient Voltage protection system to protect the X’mer against High Voltage Surges of make Siemens / ABB / Schneider / GE. The scope also includes Inspection by M&M/DHBVN. (For PH No. 1, 2 J/C ).

Supply, erection and commissioning of MS Components duly Painting including any kind of civil work for various sites as:- a.)Trash-rack of size as per actual site requirement made of 50X50X6mm MS angle & 50X6 mm MS Flat each at 2” apart. b.) MS Grating of size as per actual site requirement made of 40X40X5 mm MS angle & 35X5 mm MS Flat each 2” apart. c.) MS 3” Solid pipe (Horizontal) both end hinged one end to PH wall and other to other end of MS Pipe 3” (Vertical) which acts as a support for trash rack and is digged inside 2’ under earth and top end hinged to other MS Pipe as per site condition.

Supply, erection and commissioning of MS Girder – Parallel Flange Section (Conforming to IS808:2021) size ISMB 300 X 140 with primer and Bituminous Based Paint inside & outside. Note : 1. Removal of existing VT axial flow Pumps with Motors and after commissioning of work again installation of the same (VT axial Flow pumps with motors) will be complete by the agency in all respect including any kind of civil work for various sites.

Supply, erection and commissioning of LT Power cable – Aluminium conductor Single Core 1000 mm2 XLPE Insulated, Cores Laid Up, PVC Inner sheathed Armoured (galvanized steel strip) Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Aluminium thimble, nut & bolt and other allied material completed in all respect for various sites.

Supply, erection and commissioning of LT Power cable – Aluminium conductor Single Core 630 mm2 XLPE Insulated, Cores Laid Up, PVC Inner sheathed Armoured (galvanized steel strip) Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Aluminium thimble, nut & bolt and other allied material completed in all respect for various sites.

Supply, erection and commissioning of LT Power cable – LT Power Cables 3 Core X 150 mm² Copper Conductor XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured (Galvanized steel strip), Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Copper thimble, nut & bolt and other allied material completed in all respect for various sites.

Supply, erection and commissioning of LT Power cable – LT Power Cables 3 Core X 120 mm² Copper Conductor XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured (Galvanized steel strip), Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Copper thimble, nut & bolt and other allied material completed in all respect for various sites.

Supply, erection and commissioning of LT Power cable – LT Power Cables 3 Core X 95 mm² Copper Conductor XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured (Galvanized steel strip), Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Copper thimble, nut & bolt and other allied material completed in all respect for various sites.

Supply, erection and commissioning of LT Power cable – LT Power Cables 3 Core X 70 mm² Copper Conductor XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured (Galvanized steel strip), Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Copper thimble, nut & bolt and other allied material completed in all respect for various sites.

Supply, erection and commissioning of LT Power cable – LT Power Cables 3 Core X 50 mm² Copper Conductor XLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured (Galvanized steel strip), Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Copper thimble, nut & bolt and other allied material completed in all respect for various sites.

Supply, erection and commissioning of MS Delivery pipe 258.9 mm inner Dia. ( in approx. 6 meter per pipe) and each pipe of 8 mm thickness both ends welded with flange made MS plate as per approved specification including HT Nut and bolts, rubber sheet and other fitmet accessories

Supply, erection and commissioning of MS Delivery pipe 445.2 mm inner Dia. ( in approx. 6 meter per pipe) and each pipe of 8 mm thickness both ends welded with flange made MS plate as per approved specification including HT Nut and bolts, rubber sheet and other fitmet accessories

Supply, erection and commissioning of MS Delivery pipe 711 mm inner Dia. ( in approx. 6 meter per pipe) and each pipe of 8 mm thickness both ends welded with flange made MS plate as per approved specification including HT Nut and bolts, rubber sheet and other fitmet accessories

Avon Engineering Company