Providing G.I. profile sheet to make temporary boundary at Jainagar Siding, Bishrampur Area

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto 1.50 m. All kinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge - All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) :8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

P/F pre coated galvanised iron profile sheets 0.50mm (+0.05%) total coated thickness with zinc coating 120gms per sqm as per IS:277 in 240 mps steel grade, 5-7 microns epoxy primer on both sides of sheet and polyster top coat 15-18 microns. Sheet should have protective gaurd film of 25 micron minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by E-I-C. The sheet shall be fixed using self drilling /self tapping screws of sizes (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal /vertical or curved surfaces excluding the cost of purlins,rafters and trusses and including cutting of size and shape wherever required.

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Painting wirh synthetic enamel paint of approved brand and manufacture to give an even shade( two or more coats on new work )

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information