SPECIAL REPAIRS TO BLDG NO T-78 OTM ACCN UNDER GE SAUGOR

Amount

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding removal servicable tiles from site and rubbish off the premises complete all as specified and directed.

Dismantling framed timber scantlings 40 sqcm & over in section, in any position complete all as specified and directed..

Dismantling wooden/steel framed trusses n exc 10 m span complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Demolition of PCC of any description and in any position unreinforced complete all as specified and directed.

Demolition of RCC in any location and any thicknes (reinforced) complete all as specified and directed..

M&L for RCC M-25 design mix (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span including necessary formwork complete all as specified and directed..

M&L for mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed..

M&L for mild steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed..

Taking down cement plaster on brick wall including raking out,joints hacking for key's scrubbing down with water complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.

Excavation over areas not exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed.

M&L for hardcore of gauge not exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for mirror polishing existing Kota stone flooring including filling all existing cracks and jointing with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for mirror polished machine cut Kota stone slab flooring 18mm to 20mm thick laid over and including 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for mirror polished Kota stone slab 12mm to 15mm thick in skirting, steps, riser, etc., laid over and including 15mm thick plaster in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for black Granite stone 18mm to 20mm thick machine cut, bedding & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing type laid over and including 15mm thick screed bed in CM 1:4 as in cooking plaform, window cill, etc all as specified and directed

S&F GI ( cold rolled) snap grid size of 600mm x 600mm frame work of 24mm x 38mm x 0.60mm, Tee Section ( bottom pre coated ) and 24mm x 24mm x 0.5mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and including S&F white Non Asbestos designer ceiling cement boards 4mm thick including dismantling of wall ceiling board (fibre,pulp,insulation etc) or insulation board/slab/blankers,any thickness, including cover fillets complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings laid in layers not.exc 15cm thick spread levelled and rammed including watering complete all as specified and directed.

M&L for PCC 1:2:4, type B2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregates) as in coping, benching, saucer drain and other similar work with weathering slightly rounded edges and throating etc as req with and incl all necessary form work complete all as specified and directed.

M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregates), 100mm thick as in sub base complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregates) surface finished even and smooth with using extra cement as in plinth protection including necessary form work to edges including filling of joints with bituminous compound complete all as specified and directed.

M&L for two coat cement plaster first coat 15mm thick CM 1:6 on brick wall surfaces and second coat cement plaster 5mm thick in CM 1:4 mixed with WPC surface finished even and smooth without using extra cement complete all as specified and directed. Note:-WPC shall be measured and paid seperately under respective item.

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 15 mm thick on surface other than fair face of brickwork with CM 1:6 finished even & fair complete all as specified and as directed

S&F in replacement 25 mm bore MS chromium plated conduit drapery rods, suitable for door/widows curtain with dooms with brackets fitted to each end and fixed to wall and making good the disturbed surfaces complete all as specified and directed.

Taking down chowkats/frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and directed.

Taking down chowkats/frames of area exc 1.5 Sqm and not exc 4.0 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and directed..

M&L for pressed steel frames for doors 105mmx60mm with one or more rebates incl necessary fixing lugs, hinges, lock strike plate complete and back side of pressed steel frames filled with PCC 1:3:6, type C0 (using 12.5mm graded stone aggregates) complete all as specified and directed.

S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed.

S&F steel window with side hung shutters with glazing bars devetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc and M&L PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggregates) for filling in pressed steel frame complete all as specified and directed.

S&F steel window with side hung shutters without glazing bars and fixed to steel frame -ditto-

Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. one brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 200 mm complete all as specified and directed .

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 300 mm complete all as specified and directed.

S&F Aluminium handles, cast type, anodised, size of handle 150mm complete all as specified and directed

S&F steel work in purlins/rafters/posts with round/rectangula/ square hollow mild steel section complete all as specified and directed.

S&F pre-painted galvalume Aluminium Zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling plain or corrugated asbestos sheeting, any gauge, thickness complete all as specified and directed.

S&F 0.45 mm thick galvalume sheet precoated coloured ridge suitable for profile pattern sheet fixed with self driving screws including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed.

S&F mild steel plates (plain or chequred) channels, square cut or notched forming holes, with riveted, bolted, welded attachement conforming to Fe 410 - W (Gde-E-250) quality-B complete all as specified and directed..

S&F mild steelscrew bolts machine made with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 11 to 15mm and length exc 10cm and not exc 15cm long complete all as specified and directed.

S&F mild steel screw bolts machine made with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 16 to 20mm and length exc 22.5cm and not exc 30cm complete all as specified and directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and directed.

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for applying Birla / J. K. wall care white putty 1 mm thick for levelling the surfaces of walls and applying two coat of acrylic distemper over a coat of interior primer including preparation of new wall surfaces of walls complete all as specified and directed.

M&L for complete removal of existing treatment and applying Birla / J. K. wall care white putty 1 mm thick for levelling the surfaces of walls and applying two coat of acrylic distemper over a coat of interior primer incl. preparation of surfaces of walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats exterior emulsion paint over one coat of exterior primer complete all as specified and directed. Make:- Asian ACE or equivalent make as approved by GE

Removing excavated materials (soil) to a distance not exc. 150 m and deposting where directed, at a level not exc. 1.5m above the starting point complete all as specified and directed.

Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed.

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLS insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead including taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc. complete all as specified and directed:-

For one light, fan point controlled by one switch

For one 5 Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per Srl item No.54 here in before but for power point wiring using with 2.5 Sqmm PVC-FR LS insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 Sqmm PVC insulated, sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead -ditto-

S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed

S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed

S&F switch modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed

S&F socket modular 6/16 Amp, 2/3 pin combined, 2 module 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit,three terminal complete all as specified and directed

S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S&F modular fan step regulator upto 120W, suitable for BEE 5 Star rated fan complete all as specified and directed

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.63 above but SPN 63 Amps, 240 V

S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed

S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 100 MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed

S&F MCCB 100 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed

S&F in replacement LED tube light fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7PN1W020, 4 feet or equivalent make as specified in Appendix'C' of Particular Specifications

S&F in replacement of conventional recess mounted fitting to LED 2' X 2' ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed. Make-Havells cat part No PLANO2X2PLR36WLED857S or equivalent make as specified in Appendix'C' of Particular Specifications

S&F in replacement LED Bulk head fitting 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installercomplete all as specified and directed. Make:- Havells cat part No LHEXCGP7UN5W013 or equivalent make as specified in Appendix'C' of Particular Specifications

M&L for concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

S&F in replacement box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7IN1W009 or equivalent make as specified in Appendix'C' of Particular Specifications

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metallic body with all accessories including making hole in stone /brick wall grouting &making good in all aspects complete all as specified and directed. Make -Bajaj Maxima DXI 300mm/CG Trans Air 12"/ Havells Ventil Air-DS

S&F ceiling fan 1200 mm sweep metallic white colour with BEE 5 Star rated, single phase and connecting up including provision of cable from ceiling rose or connector to fan and including hanging fastner/clamp complete all as specified and directed. Make - Havells/Bajaj/CG

Supplying and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 70 sqmm 3.5 core complete all as specified and directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable and getting out hard / dense soil complete all as specified and directed.

M&L for sand cushioning in trenches for the cable complete all as specified and directed

Returning filling, spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed

M&L for kiln burnt bricks sub class 'B' laid in trenches for cable protection complete all as specified and directed

S&F in replacement of GI pipe light grade 80 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed

M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

M/s VIKAS TRADERS

maharaja construction and suppliers

NIHAL ENTERPRISES

siddhant construction

m/s mahendra kumar khare contractor

v k builder

SAGAR MOTOR AND TRACTOR CO

M/S vikas jain

pal enterprises

CREATIVE CONSTRUCTION

HAFEEZ CONSTRUCTION