ADDN / ALTN TO SECURITY GATES AND INFRA AT AF STN KALAIKUNDA UNDER GE (AF) KALAIKUNDA

Amount

Excavating in trenches n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil.Complete all as specified and directed.

Returning, filling in, incl spreading, leveling, watering and well ramming in layers n exc 25cm in soils.Complete all as specified and directed.

Removal of surplus soil to a distance n exc 100m and depositing where directed at level n exc 1.5 m above the starting point Complete all as specified and directed.

M&L cement concrete 1:3:6, type C-2 (using 40 mm graded stone agg) as in foundations, filling and mass concrete.Complete all as specified and directed.

M&L for M-25 Reinforced cement concrete (design mix) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.Complete all as specified and directed.

M&L for M-25 Reinforced cement concrete (design mix) in Columns, pillars, piers, posts and struts

M&L for M-25 Reinforced cement concrete (design mix) in Beams, cantilevers, bressummers, lintels over 1.5m span

Use and Waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete, flat surface complete

Use and Waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete, Square/rectangular

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L rendering 15mm thick on other than fair faces of brick work in CM 1:4 finished even and fair complete

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (as in horizontal support to tie up chain link)

S&F Mild steel TMT bars 5 mm dia and above mm dia and over stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (as in horizontal support to tie up chain link)

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L, PCC 1:2:4 type B1 using 20mm graded BT stone aggregate as in bed block, coping and the like including weathering, slightly rounded or chamfered angles and throating, including form work complete all as specified and as directed.

S&F Rolled mild steel Framed work as in doors or gates (ornamental type) of angle or other section with gusset plates, rails, braces, etc.& other structural work complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-410-W Gde E-250 Quality A

S&F Framed work such as for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc grills, gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome all as specified.

M&L brickwork with fly ash bricks, straight or curved,old size brickson plan exc 6m mean radius, built in CM 1:6 Complete.

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out in soft/loose soil, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm complete all as specified and directed by Engr-in-Charge.

M&L cement concrete type C2 1:3:6 (40 mm graded stone Aggregate) for post of fencing etc.

S&F 10mm round bars as in stiffner to hold the chain link fencing fixed with angle iron post inclucinding necessary welding and fixing arrangement at ends complete all as specified and directed.

S&F mild steel works in posts and struts and flat iron work in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling ,bolting or riveting etc and similar works conforming to Fe-290 (Gde-E-165) all as specified and directed

Supply only mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed at other fitted with washer and nut 5 to 10mm dia and 50mm long complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified

M&L for Surface excavation of soft soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified as directed

M&L for Hardcore of broken stone or boulder of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specifed and directed

M&L for Cement concrete in foundations, filling and mass concrete or subbase type D2 (1:4:8) using 40 mm graded aggregrate complete all as specified and as directed

M&L for 50 mm Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified

M&L for Providing, cement concrete in kerbs or mud stops, rounded or chamfered on edge in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as type B1 (1:2:4) (20 mm graded aggregate), as directed

M&L for WBM 150 mm thick (75 mm thick each layer) (compacted thickness),with coarse aggregate of granite, trap or basalt of grading 2(40mm to 63mm size),spread, rolled and consolidated to required gradient and camber with power roller (exc 8 and not exc 12 tonne) complete all as specified and as directed.

M&L for Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked, mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and Applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre using paving bitumen of VG-10 complete all as specified and as directed.

Material and Labour bituminous premix semi-dense asphaltic concrete 40 mm consolidated thickness with 5.5% binder (paving bitumen grade VG-30) content by weight of total mix spread evenly with mechanical paver to desired thickness and to the correct camber, rolled and compacted to required camber & gradient with 8 to 12 tonne power roller/vibratory roller/double drum or tandem roller as suitable complete all as specified and directed by Engr-In-Charge.

M&L for Excavating over areas, n exc 1.5 m deep and getting out complete all as specified and as directed

M&L for Rolling and consolidating formation surfaces in cutting using power roller exc 2 tonne n exc 5 tonne

M&L for 100mm thick,compacted thickness (40 to 90 mm) Soling (or sub base) with broken boulders,inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed Note 1:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount. Note 2:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

Kalpana Traders (BID ID -3340742)