Facility Management of Electrical and Mechanical Equipments of Elevators, Escalators, Travellators, Passenger Boarding Bridges, Conveyor Belt and Standalone Weighing Scales at Chennai International Airport.

Amount

SH - I: FIRST YEAR

Mechanised Maintaining the Cleanness of Escalators of vertical rise height of 6mtr/10.5mtr. & travellators in all the terminals of Chennai Airport daily including Sundays and Holidays using automated machine with eco-friendly non-corrosive chemicals having corrosion inhibitor i/c manual cleaning of balustrades, landing plates etc. as required and as per special conditions of contract & technical specifications and as per the directions of Engineer-in-charge. (Note: Maintaining the Cleanliness of one no. escalator/travellator for one month shall be treated as 1 job. The manpower details and detailed scope of work will be as per SCC. The quoted rate shall be exclusive of GST, EPF, ESI/Mediclaim & Bonus).

Maintaining the Cleanness of Elevators (inner walls, ceiling, floor & door movement track) by mechanical & manual by means of using suitable cleaning materials on daily basis including Sundays & Holidays as per special conditions of contract, technical specifications and as per directions of Engineer-in-charge. (Note: Maintaining the Cleanliness of one no. Elevator for one month shall be treated as 1 job. The manpower details and detailed scope of work will be as per SCC. The quoted rate shall be exclusive of GST, EPF, ESI/Mediclaim & Bonus).

Maintaining the Cleanness of Passenger Boarding Bridge interior & exterior by mechanical & manual means by using suitable cleaning materials on daily basis including Sundays & Holidays as per special conditions of contract, technical specifications and as per directions of the Engineer-in-charge. (Note: Maintaining the Cleanliness of one no. Passenger Boarding Bridge for one month shall be treated as 1 job.The manpower details and details scope of work will be as per SCC. The quoted rate shall be exclusive of GST, EPF, ESI/Mediclaim & Bonus).

Monitoring the smooth & safe operation of 6.0mtr/10.5mtr height escalators and Travellator in all the terminals of Chennai Airport on round the clock basis in three shifts including sundays & holidays as per special conditions of contract, technical specifications and as per directions of Engineer-in-charge. (Note: Monitoring One No. location for one month shall be treated as 1 job. The manpower details and detailed scope of work will be as per SCC. The quoted rate shall be exclusive of GST, EPF, ESI/Mediclaim & Bonus).

Providing the 02 Nos. Lift Technicians for handling lifts of all makes and rescuing passengers entrapped if any on round the clock basis in three shifts, one for Domestic Terminal and one for International Terminal as per special conditions of contract & technical specifications including 02 Nos. Supervisors in each shift, one for Domestic Terminal and one for International Terminal on round the clock basis including Sundays and Holidays and 02 No. Document Writer, 01 No. LMV Driver (Vehicle and Fuel provided by AAI) as per the directions of Engineer-in-charge. (Note: The manpower details and details scope of work will be as per SCC. The quoted rate shall be exclusive of GST, EPF, ESI/Mediclaim & Bonus).

Obtaining Lift Insurance from the Registered Insurance company as required and as per directions of Engineer-In-Charge. (The quoted rate shall be exclusive of GST).

Obtaining Lift License from the Lift Licensing Authority i.e.,Govt. of Tamil Nadu by applying three months prior to the date of expiry of the licence, as required and as per directions of Engineer-In-Charge. (The quoted rate shall be exclusive of GST).

Obtaining Escalator License from the Licensing Authority i.e., Govt. of Tamil Nadu as per the statutory rules and as per directions of Engineer-In-Charge. (The quoted rate shall be exclusive of GST).

Providing man power to attend any urgent / emergency work etc., as and when required as per directions of Engineer-in-charge. (The quoted rate is exclusive of GST, EPF, ESI/Mediclaim & Bonus).

Unskilled labour

Semiskilled labour

Skilled labour

Providing and fixing of Etched Stainless-Steel name plates with lacquer coating (name & colour decided by AAI) for all Elevators in the customized sizes as required and as per directions of Engineer-in Charge. (The quoted rate shall be exclusive of GST).

Providing and fixing of customized Poly Vinyl Sticker for all Lifts/Escalator/Travellator/Conveyor/PBB and other locations as required and as per the directions of Engineer-in-charge. (The quoted rate shall be exclusive of GST).

Providing and fixing of Polyvinyl chloride sheet flooring of thickness 2mm (vinyl flooring) and sticking with rubber based adhesives of approved quality and manufacturer like Dunlop S-758, Fevicol SR 998 or equivalent of approved pattern and colour including rolling with light wooden roller weighing about 5kg after cleaning the surface etc., and as directed by the Engineer-In- Charge. (The quoted rate shall be exclusive of GST).

Supply of below mentioned Philips LED Drivers as and when required for existing Philips LED Luminiarie in all Passenger Boarding Bridges and Elevators after checking the non-functional Luminiarie and as per instructions of Engineer-in Charge. (The quoted rate shall be exclusive of GST).

Replacement of damaged and wornout floor mat in Passenger Boarding Bridges with '3M Entrap web Z-3200' model using 3M Matting adhesive as and when required and as per directions of Engineer-in Charge. (The quoted rate shall be exclusive of GST).

All Inclusive Comprehensive Maintenance Contract of following type Air-Conditioners including all necessary spares, consumbles, filters etc., preventive maintenance, breakdown maintenance and emergency call service etc., to keep equipment in perfect condition etc as required and as per directions of Engineer-in Charge.(Note: AICMC of one No. AC for one month shall be treated as 1 Job.The quoted rate shall be exclusive of GST.)

1-phase upto 2 TR ceiling mounted Split-Air Conditioner

1-Phase, 3 TR Cassette type Air- conditioner

Routine / Preventive / Breakdown Maintenance of 3 Nos. Slopped Pallet type Arrival Baggage Conveyor System including all its associated installations installed at old International Arrival i/c monitoring the operation of systems and ensuring smooth operation of the conveyor etc., as per special conditions, technical specifications and directions of Engineer-in-charge. (Note: Maintenance of One No. Conveyor for one month shall be treated as 1 job. The manpower details and detailed scope of work will be as per SCC. The quoted rate shall be exclusive of GST, EPF, ESI/Mediclaim & Bonus)

Providing hot vulcanizing joint suitable for 2 ply, 900,1000 & 1300 mm wide, 3.0 mm thick polyurethane impregnanated conveyor belts i/c cutting, making vulcanizing joint and alignment of belt etc. as required. (The quoted rate shall be exclusive of GST.)

Providing joint by using the fastener suitable for 2 ply, 900,1000 & 1300 mm wide, 3.0 mm thick polyurethane impregranated conveyor belts i/c cutting, making fastner joint and alignment of belt etc. as required. (The quoted rate shall be exclusive of GST.)

Supply of following items for AIT Arrival Conveyor System as and when required. (The quoted rate shall be exclusive of GST)

10mm thickness nylon re-inforced rubber Belt for Friction drives suitable for Glidepath Make Carousel

Belt for Friction drives suitable for Vanderlande Make Carousel

Supply of Foot Bumper/Flaps/Side bumper (Black Colour) suitable for the Vanderlande Make Carousel

Tyred Wheels suitable for M/s Vanderlande Make

Minor Repair and Servicing of following Carousel Drive Motor with Gearbox including replacement of wornout bearings,oil seals,Terminal connectors and other related hardware items etc. as required by indigenous vendors as and when required. (The quoted rate shall be exclusive of GST)

Make: Nord Drive Motor, 2.2 KW

Supplying and Installing the following size of Solid bottom painted with powder coating M.S. cable trays (Cable trunk) on ground surface by dismantling the existing cable tray and cables and reinstallation of new cable tray joined with connectors with proper clamping arrangement alongwith laying back the removed cables with proper dressing etc as required and as per direction of Engineer-In-Charge. (The quoted rate shall be exclusive of GST.)

200 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

100 mm width X 50 mm depth X 1.6 mm thickness

Supplying of following size Copper Conductor,PVC insulated and PVC sheathed /XLPE armoured Power cable of 1.1 KV grade of following sizes conforming to IS-7098 (Part-I) 1988 with upto date amendements as and when required. (The quoted rate shall be exclusive of GST.)

4 Core x 1.5 Sq.mm

Supplying of following size Copper Conductor,PVC insulated and PVC sheathed unarmoured cable of following sizes conforming to IS-694 with upto date amendements as and when required. (The quoted rate shall be exclusive of GST.)

3 Core x 0.75 Sq.mm

4 Core x 1.00 Sq.mm

Supply of following size Galvanised Iron(GI) flexible conduit as per site requirement etc. complete as required as per specifications as and when required. (The quoted rate shall be exclusive of GST.)

All Inclusive Comprehensive maintenance Contract for Standalone type electronic weighing scales at Chennai Airport, which shall include monthly visit for carrying out preventive maintenance, breakdown maintenance as and when required for a period of one year including repair/replacement of all defective spares including load cell, display unit etc. with minimum down time etc. as per particular conditions and Technical Specifications etc. as required. (Note: Maintenance of One No. Standalone Weighing Scale for one month shall be treated as 1 job. The quoted rate shall be exclusive of GST.)

11 Nos. Standalone type Electronic Weighing scales at NDT & NIT

Obtaining Stamping and Certificate of verification of the following weighing machines from the Department of Legal Metrology, Govt. of Tamil Nadu as per the existing legal metrology norms applicable for electronic weighing machines inculding service charges,Conveyance fee and all other applicable charges. (The quoted rate shall be exclusive of GST.)

11 Nos. Standalone type Electronic Weighing scales at NDT & NIT.

Supply of Standard Weighing Stones of different capacity denomination and obtaining stamping and certificate of verification of the following weighing stones from the Dept. of Legal Metrology,Govt. of Tamil Nadu as per the existing Legal Metrology act applicable for weighing stones. (The quoted rate shall be exclusive of GST)

5 kg Weighing stone

10 kg Weighing stone

20 kg Weighing stone

50 kg Weighing stone

Supply of 300 kgs Capacity, Platform type Standalone Electronic Weighing machine complete with all accessories such as Load Cell, SS platform(Size Min 800 mm X 800 mm), model approved by the Govt. including initial stamping and certificate of calibration by the Legal Metrological Dept.,transportation,testing and commissioning etc. as required (Make Essae Model-SI810 Low Profile or M/s Leotronic Model -EPS 301 or equivalent in any of Govt approved make) as and when required. (The quoted rate shall be exclusive of GST)

SH -II: SECOND YEAR

Mechanised Maintaining the Cleanness of Escalators of vertical rise height of 6mtr/10.5mtr & travellators in all the terminals of Chennai Airport daily including Sundays and Holidays using automated machine with eco-friendly non-corrosive chemicals having corrosion inhibitor i/c manual cleaning of balustrades, landing plates etc. as required and as per special conditions of contract & technical specifications and as per the directions of Engineer-in-charge. (Note: Maintaining the Cleanliness of one no. escalator/travellator for one month shall be treated as 1 job. The manpower details and detailed scope of work will be as per SCC. The quoted rate shall be exclusive of GST, EPF, ESI/Mediclaim & Bonus).

Maintaining the Cleanness of Elevators (inner walls, ceiling, floor & door movement track) by mechanical & manual by means of using suitable cleaning materials on daily basis including Sundays & Holidays as per special conditions of contract, technical specifications and as per directions of Engineer-in-charge. (Note: Maintaining the Cleanliness of one no. Elevator for one month shall be treated as 1 job. The manpower details and detailed scope of work will be as per SCC. The quoted rate shall be exclusive of GST, EPF, ESI/Mediclaim & Bonus).

Maintaining the Cleanness of Passenger Boarding Bridge interior & exterior by mechanical & manual means by using suitable cleaning materials on daily basis including Sundays & Holidays as per special conditions of contract, technical specifications and as per directions of the Engineer-in-charge. (Note: Maintaining the Cleanliness of one no. Passenger Boarding Bridge for one month shall be treated as 1 job.The manpower details and details scope of work will be as per SCC. The quoted rate shall be exclusive of GST, EPF, ESI/Mediclaim & Bonus).

Monitoring the smooth & safe operation of 6.0mtr/10.5mtr height escalators and Travellator in all the terminals of Chennai Airport on round the clock basis in three shifts including sundays & holidays as per special conditions of contract, technical specifications and as per directions of Engineer-in-charge. (Note: Monitoring One No. location for one month shall be treated as 1 job. The manpower details and detailed scope of work will be as per SCC. The quoted rate shall be exclusive of GST, EPF, ESI/Mediclaim & Bonus).

Providing the 02 Nos. Lift Technicians for handling lifts of all makes and rescuing passengers entrapped if any on round the clock basis in three shifts, one for Domestic Terminal and one for International Terminal as per special conditions of contract & technical specifications including 02 Nos. Supervisors in each shift, one for Domestic Terminal and one for International Terminal on round the clock basis including Sundays and Holidays and 02 No. Document Writer, 01 No. LMV Driver (Vehicle and Fuel provided by AAI) as per the directions of Engineer-in-charge. (Note: The manpower details and details scope of work will be as per SCC. The quoted rate shall exclusive of GST, EPF, ESI/Mediclaim & Bonus).

Obtaining Lift Insurance from the Registered Insurance company as required and as per directions of Engineer-In-Charge. (The quoted rate shall be exclusive of GST).

Obtaining Lift License from the Lift Licensing Authority i.e.,Govt. of Tamil Nadu by applying three months prior to the date of expiry of the licence, as required and as per directions of Engineer-In-Charge. (The quoted rate shall be exclusive of GST).

Obtaining Escalator License from the Licensing Authority i.e., Govt. of Tamil Nadu as per the statutory rules and as per directions of Engineer-In-Charge. (The quoted rate shall be exclusive of GST).

Providing man power to attend any urgent / emergency work etc., as and when required as per directions of Engineer-in-charge. (The quoted rate is exclusive of GST, EPF, ESI/Mediclaim & Bonus).

Unskilled labour

Semiskilled labour

Skilled labour

Providing and fixing of Etched Stainless-Steel name plates with lacquer coating (name & colour decided by AAI) for all Elevators in the customized sizes as required and as per directions of Engineer-in Charge. (The quoted rate shall be exclusive of GST).

Providing and fixing of customized Poly Vinyl Sticker for all Lifts/Escalator/Travellator/Conveyor/PBB and other locations as required and as per the directions of Engineer-in-charge. (The quoted rate shall be exclusive of GST).

Providing and fixing of Polyvinyl chloride sheet flooring of thickness 2mm (vinyl flooring) and sticking with rubber based adhesives of approved quality and manufacturer like Dunlop S-758, Fevicol SR 998 or equivalent of approved pattern and colour including rolling with light wooden roller weighing about 5kg after cleaning the surface etc., and as directed by the Engineer-In- Charge. (The quoted rate shall be exclusive of GST).

Supply of below mentioned Philips LED Drivers as and when required for existing Philips LED Luminiarie in all Passenger Boarding Bridges and Elevators after checking the non-functional Luminiarie and as per instructions of Engineer-in Charge. (The quoted rate shall be exclusive of GST).

Replacement of damaged and wornout floor mat in Passenger Boarding Bridges with '3M Entrap web Z-3200' model using 3M Matting adhesive as and when required and as per directions of Engineer-in Charge. (The quoted rate shall be exclusive of GST).

All Inclusive Comprehensive Maintenance Contract of following type Air-Conditioners including all necessary spares, consumbles, filters etc., preventive maintenance, breakdown maintenance and emergency call service etc., to keep equipment in perfect condition etc as required and as per directions of Engineer-in Charge.(Note: AICMC of one No. AC for one month shall be treated as 1 Job.The quoted rate shall be exclusive of GST.)

1-phase upto 2 TR ceiling mounted Split-Air Conditioner

1-Phase, 3 TR Cassette type Air- conditioner

Routine / Preventive / Breakdown Maintenance of 3 Nos. Slopped Pallet type Arrival Baggage Conveyor System including all its associated installations installed at old International Arrival i/c monitoring the operation of systems and ensuring smooth operation of the conveyor etc., as per special conditions, technical specifications and directions of Engineer-in-charge. (Note: Maintenance of One No. Conveyor for one month shall be treated as 1 job. The manpower details and detailed scope of work will be as per SCC. The quoted rate shall be exclusive of GST, EPF, ESI/Mediclaim & Bonus)

Providing hot vulcanizing joint suitable for 2 ply, 900,1000 & 1300 mm wide, 3.0 mm thick polyurethane impregnanated conveyor belts i/c cutting, making vulcanizing joint and alignment of belt etc. as required. (The quoted rate shall be exclusive of GST.)

Providing joint by using the fastener suitable for 2 ply, 900,1000 & 1300 mm wide, 3.0 mm thick polyurethane impregranated conveyor belts i/c cutting, making fastner joint and alignment of belt etc. as required. (The quoted rate shall be exclusive of GST.)

Supply of following items for AIT Arrival Conveyor System as and when required. (The quoted rate shall be exclusive of GST)

10mm thickness nylon re-inforced rubber Belt for Friction drives suitable for Glidepath Make Carousel

Belt for Friction drives suitable for Vanderlande Make Carousel

Supply of Foot Bumper/Flaps/Side bumper (Black Colour) suitable for the Vanderlande Make Carousel

Tyred Wheels suitable for M/s Vanderlande Make

Minor Repair and Servicing of following Carousel Drive Motor with Gearbox including replacement of wornout bearings,oil seals,Terminal connectors and other related hardware items etc. as required by indigenous vendors as and when required. (The quoted rate shall be exclusive of GST)

Make: Nord Drive Motor, 2.2 KW

All Inclusive Comprehensive maintenance Contract for Standalone type electronic weighing scales at Chennai Airport, which shall include monthly visit for carrying out preventive maintenance, breakdown maintenance as and when required for a period of one year including repair/replacement of all defective spares including load cell, display unit etc. with minimum down time etc. as per particular conditions and Technical Specifications etc. as required. (Note: Maintenance of One No. Standalone Weighing Scale for one month shall be treated as 1 job. The quoted rate shall be exclusive of GST.)

11 Nos. Standalone type Electronic Weighing scales at NDT & NIT

03 Nos. Standalone type Electronic Weighing scales at NDT & NIT as and when required (supplied in First Year)

Obtaining Stamping and Certificate of verification of the following weighing machines from the Department of Legal Metrology, Govt. of Tamil Nadu as per the existing legal metrology norms applicable for electronic weighing machines inculding service charges,Conveyance fee and all other applicable charges. (The quoted rate shall be exclusive of GST.)

11 Nos. Standalone type Electronic Weighing scales at NDT & NIT.

03 Nos. Standalone type Electronic Weighing scales at NDT & NIT as and when required (supplied in First Year).

Supply of 300 kgs Capacity, Platform type Standalone Electronic Weighing machine complete with all accessories such as Load Cell, SS platform(Size Min 800 mm X 800 mm), model approved by the Govt. including initial stamping and certificate of calibration by the Legal Metrological Dept.,transportation,testing and commissioning etc. as required (Make Essae Model-SI810 Low Profile or M/s Leotronic Model -EPS 301 or equivalent in any of Govt approved make) as and when required. (The quoted rate shall be exclusive of GST)

CHENNAI ENGINEERING SERVICES

PREMIER ENGINEERING TECHNICS PVT. LTD.