Transporting and installation of belt conveyor (1000mm, 600TPH Conveyor belt with drive capacity 1x110kW, 550Volts, Approx Length of belt 500 M) at 51L from 24D to up to 500 metres in W-9 Panel including foundation work at Churi Colliery, NK Area

Amount

Part-A (Transportation)

Transporting of base plate of drive head from incline mouth to site.

Transporting of gear box Part 1 from incline mouth to site

Transporting of gear box Part 2 from incline mouth to site

Transporting of discharge frame from surface to site.

Transporting of loop takeup frames from surface to site.

Transporting of motor, starter, lighting transformer, winch starter, coupling from surface to site.

Transporting of discharge drum and snub drum from surface to site.

Transporting of loop takeup drums from surface to site.

Transporting of winch frame and rope from surface to site.

Transporting of stool 170 nos. from surface to site.

Transporting of 340 nos. channel from unit surface to site.

Transporting of 540 nos. top frame from surface to site.

Transporting of 1620 nos. top roller from surface to site.

Transporting of 170 nos. bottom roller from surface to site.

Transporting of decking plate from surface to site

Transporting of fencing from surface to site

Recoiling of belt 1050 M

Transporting of belt from surface to site 1050 Mtrs

Transporting of AVA, PCC and connecting cable from surface to site.

Transporting of one barrel gear oil from surface to site

Transporting of Tail drum and frame from surface to site

Tools and tackles

Contractor's profit

Part-B (Installation)

Installation of base plate of drive head

Placing of drum with gear box and installation on base plate with the help of Chain pulley block

Cleaning of drive head and gear box, top up of gear oil

Installation of Motor and fluid coupling and its fixing with alignment

Installation of discharge frame and jaming

Fixing of discharge drum and snab drum

Installation of complete loop take up unit

Fixing of winch set with rope

Fixing of foot stools, channel, top bracket, bottom roller & top roller for 500 mtrs.

Laying, lapping of 1000mm width PVC belting length 1050 mtrs and making of jointing

Installation of tail end drum with frame

Fixing of PCS, AVA, 10 Nos.

Fixing fo AVA, Pull cord switch and cable laying and electrical work

Making of discharge chute

Tools and tackles

Contractor's profit

Part-C (Civil work) Making of foundation for installation of belt conveyor at 51L from 24D to up to 500 metres

Excavation work by mechanical means (Hydraulic excavator) manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m Ordinary rock.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Providing and fixing M.S. Nut & Bolts etc complete as per instruction of Engineer-In-charge.

Transportation of materials in UG including loading, unloading with manual means sand.

Transportation of materials in UG including loading, unloading with manual means stone aggregate

Transportation of materials in manual labour including loading, unloading and stacking Cement.

Transportation of materials in manual labour including loading, unloading and stacking.

Part-D (Consumables)

Supply of MS Nut & Bolt size 5/8x2" 1500 Kg

Supply of HT Nut and Bolt M20 x 120

Total impact of GST for the purpose of CTC

Mouryadhawaz Enterprises

M/S ANJALI SINGH