SE/GC/TIN/C37A/2019-20

Amount

Earthwork excavation in hard stiff clay, black cotton, hard red earth, shales, murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soil including all cost of labour, T & P, lead, lift, head load etc., complete.

Earth filling inside the basement including labour for filling, T & P, lead, lift, head load etc complete.

P.C.C 1:3:6 for foundation & flooring using 40mm HBG metal including cost of all materials, labour, lead, lift, head load, curing etc., complete.

Floor plastering with CM 1:5-20mm thick including cost of all materials, labour, lead, lift, head load, curing etc., complete.

Supplying and fixing in position of two part weld-mesh 25mmx25mmx10Ga including cost of all materials, fabrication charges, transporting charges, lead, lift etc., complete.(0.60mx0.45m)

Supplying, fabricating and fixing of front steel door using 35x35x5mm M.S. angle for outer frame and 25x25x5mm M.S. angle for shutter frame and 18 gauge M.S. sheet upto 1.50m and steel grill with 10mm square rod at 7.50cm spacing in both direction for balance 0.30m height and balance 18 gauge M.S. sheet including locking arrangements, tower bolt, hinges etc and two coats of enamel painting over one coat of primer including cost of all materials, lead, lift, labour, transport etc., complete.

Supplying, fabricating and placing in position of GI pipes TATA make or equivalent as approved by the Engineer incharge for purline including the cost of all materials, labour, cutting, jointing by welding, pipe to pipe screwing with necessary angle support, transportation, lead, lift, head load, two coat of enamel painting over one coat of red oxide primer etc complete.

40x80mm size for main rafter

50x50mm size for distribution rafter.

Supplying and placing in position of GI roofing sheet 1.60mm thick with necessary GI bolts and nuts and washers as approved by the Engineer incharge including the cost of all materials, labour, cutting, lap jointing with pipe by screwing, transportation, lead, lift, head load etc., complete.

Providing and fixing sanitary fittings consisting of Neycer/Parry ware of Oriyya pattern water closet single 60cm with P or S trap connecting with PVC ventilating shaft and Y bend complete including cost of all materials, lead, lift etc complete.

Supplying and fixing in position PVC multi floor trap of approved make and quality and size 100x75mm or 63mm fixed over a bed of brick jelly lime concrete and finised with CM 1:3, and fixed stainless steel grating including PVC pipe of 6m length for connecting to drain, the cost of all materials, labour, lead, lift, T & P etc., complete.

Supplying and fixing & laying of 110mm dia PVC pipe (6Kg/m2) & Refilling, all cost of materials, lead, lift, testing etc complete.

Refilling of the excavated earth of all kind of soil for covering the pipe line work.

Supplying, laying and joining of PVC pipes 10Kg/cm2 and specials of approved quality Finolex (or) equivalent and best variety conforming with ISI mark, of the size with necessary specials including cost of all materials, cutting, jointing, transporting, lead, lift etc complete.

25m PVC pipe 10Kg/cm2 and specials of approved quality Finolex (or) equivalent.

20mm PVC pipe 10Kg/cm2 and specials of approved quality Finolex (or) equivalent.

25mm 1” GM valve (Heavy duty)

15mm PVC water rap ISI or equivalent (water tech or equivalent)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed Sc Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch with painting of suitable colour for open PVC light point/fan point (For electronic regulator) (SD-17)

Wiring with 2x4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mmx100mmx75mm TW switch box for 15A3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point. (SD-39)

Supply and fixing of fancy glass shade with 11W CFL bulb. (SD-81)

GST 12% as per Govt. Norms