08/HDA/EC-ELECT/2024 - 2025

Amount

Supply & delivery of LED Flood light of following specification: a) 150 W (+/-5%) for each set (Maximum). b) Lumen output should be minimum15000 lumen from each set. c) The luminaries should be of IP 66 protection. d) In put Voltage of 130 V – 270 Volt, 50 Hz. A.C. supply e) Driver should have in-built protection against high voltage surge, open circuit & short circuit. f) Housing should be of Die-cast aluminium housing with epoxy powder coating and having cooling fins for effective heat dissipation. Separate cavity for driver & LED lamp. g) Operating Temperature: 50 Degree centigrade. h) Third party test report from NABL accredited laboratory of LM-79, LM-80 & IP-66. i) The product should have 5 years warranty period (Make: Bajaj / Havells / Crompton / Philips.)

Supply, delivery & installation of 10 M Height GI octagonal pole, 3.0 mm thick (BSEN 10025) Octagonal/ polygonal Mini-mast (single section 10000mm), Top dia-70mm, Bottom dia-175mm, and 1 no Full Moon Bracket suitable to mount min 4 nos. of non integral flood light fittings (with luminaries mounting plate and provision of passing wire) along with base plate -310mm X 310mm X 20mm, Foundation bolt-M24 X 750mm X 4nos ‘J’ type GI nut bolts, (IS 1367). Construction of shallow foundation of above 10 Mtr pole with M25 grade concrete for the high mast considering the safe soil bearing capacity (10T/Sq M @2Mtr depth) at site at suitable depth with all materials and labour. Erection of the above 10Mtr high Mini Mast and one number 2.5m long 40mm dia GI pipe earthing in house Terminal arrangement with cover for cable loop-in and loop-out. The rate should include testing at your works, all taxes and delivery the materials at different locations of HDA planning area.(Make:UTKARSH INDIA LTD/ VALMONT/ TRANSRAIL LIGHTING LIMITED/ BAJAJ ELECTRICALS LTD/ SKIPPER).

Supply, drawing and Connection of luminaries with 3C X 1.5 Sqmm pvc insulated FR copper conductor through the Poles from looping box to light fittings as required.(For Mini mast per Pole 2 Nos)[ Havells/Polycab/Gloster/ KEI]

Fixing only Street / Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. (excluding the cost of RCC Foundation)

Supply and fixing of SPMCB "C" Curve 1-4 Amp with ISI marked to be placed on a din channel of Pole and connection with Terminal connector at the suitable location of the pole.(Legrand)(For Mini mast per Pole 2 Nos)

Supply and Installation of HDA printed logo suitable 15"×9" on GI Octagonal/tubular Pole, on brick foundation of meter box, feeder pillar box. (3 nos logo p/pole, per meter box, per feeder pillar box.)

Lifting of the running Under Ground Cable coming to the looping cable Box upto the top of the muffing above the top of the ground level by drawing through 40 mm dia rigid pvc pipe of superior Quality and tiding the same by no 10 SWG G I wire with the pole including supply of pipe & wire & filling the top of the pipe/pipe hole with bitumen and neat cementing properly (average run- 1.5 mtrs/run X 2 runs per pole).

Supply of 1.1 KV grade 4 C X 6 Sqmm XLPE aluminium armoured Cable, As per IS 7098. (Make - KEI/Gloster/Havells/Polycab.)

Supplying and Erection of additional foundation having Dimension of 600 * 600 * 600 mm C.C foundation (6:3:1) with graded stone chips (3/4" down) providing R.B. Net of 2" * 4" in size including neat cementing.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (2.8 sqmm per panel x 1+1.54 sqmm mimni mast/10 Mtr Pole x 10).

Painting the vertical end faces of posts, wheel guards or railing or parapet with alternate bands of different colours as directed by the Engineer-in-charge with approved synthetic enamel paint. ( 2.8 sqmm per panel x 1+1.54 sqmm mimni mast/10 Mtr Pole x 10).

Supply and laying of HDPE pipe [ISI Marked, PE 80/PE 100, PN 10] 50 mm dia O.D as per appropriate specification at minimum 600 Mtr depth from the ground level including necessary excavation and making temporary trench, making good by filling & ramming.

Laying only Cable upto 50 sq.mm through existing RCC/Hume/ GI /HDPE Pipe/open masonry trench for single, 2, 3, 3½ & 4 core

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solder less socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 core 6 sq. mm cable.

Supply GI earth Spike (1830 X 20 mm ) (Each Pole).

Earthing complete with driving of earth spike & connection of Earth electrode with noncurrent carring metallic parts of supports (Each Pole).

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. 6 SWG.

Connecting the equipments body to earth bus bar including S & F 25 mm x 6 mm galvanized (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe.

Excavation of soil for installation of Earth Electrode and filling& ramming. (a) For Soft Soil

Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep(below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement mortar (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe.

GST @18% of Total Amount

CESS @1% (Total Amount including GST)