REPAIR OF PCC AROUND TAXI LIGHTS AND RUNWAY APPROCH LIGHTS AND MISC B/R WORKS IN AIR FIELD AREA AT AF STN UTARLAI

Amount

M&L for excavating over areas, n exc 1.5 m deep and getting out soft /loose soil complete all as directed and specified .

M&L for Cement concrete in foundations,filling and mass concrete 1:4:8 type D2 (40 mm graded aggegate) , complete all as specified and directed.

M&L for 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm gradedaggregate) complete all as directed and specified .

Removing excavated material exc. 5 km and upto depositing where directed complete all as specified and directed.

S&F for galvanised iron steel water tubing 50mm bore medium grade with all fittings and fixed to wall/ceiling or laid in floors complete all as specified and directed

Demolition of cement concrete of any description exceeding 15cm thick as in floor/paving complete all as specified and directed

Removing building materials upto 5.00Km or out side MD land complete all as specified and directed.

M&L for course sand filling under floors or in foundation including watering and consolidation

Supplying and laying 400 micron thick HDPE sheet ( Virgin quality ) water proof, wrinkle free without puncture having minimum weight 390 gm/Sqm over tackcoat/ sand cushion as specified in the design with overlap between adjacent strips and at transverse joints as 300mm , complete all specified and directed

Formwork for side of concrete fair finished flat surface of concrete complete all as specified and directed

M&L for Pavement quality concrete (PQC) of minimum 28 days field Flexural trength of 45 Kg/Sqcm or 4.5 MPA aggregate gradation as per table 3 of IRC 15-2017 coarse aggragtae of clean, hard strong, dense, non porous and durable pieces of crushed stone or gravity, fine aggragates of clean natural sand or crushed stone sand or combination of both using minimum 360 kg/cum of cemnt with non-circular, virgin synthetic fibre of 12-18 mm length, specific gravity 1.34 to 1.39, UV stable, alkali resistant, with equivalent dia 15-40 micron, minimum melting temperature as 240 c and minimum tensile strength of 300 Mpa and at the rate as specified by the manufacturer. PQC laid, spread and compacted with slip form paver of minimum 7.50 m width including curingand tining by texturing cum curing Machine complete all as specified and directed. Required surface texturing to be done as specified in Clause 10.1.14 and table 9 of IRC 15-2017.cement concrete work in pavement/hard standing of flexural strength 40kg per sq cm in field using 400 kgs of cement per cubing metre thickness of concrete 25cm or less complete all as specified and directed

supply only polyester triangular fibre 6x12 mm long with semicircle dia 30-35 micron designed for melting point 240 to 260 degree Celsius and having specific gravity of 1.34-1.40, mixing @ 0.25% by weight of cement complete all as specified and directed

Finishing surface of concrete floors / hard standing by brooming

M&L for forming construction joint 10mm wide and 30mm deep and filled with sealing compound Grade 'B'

M&L for forming construction (dummy) joint 65mm deep and 10mm wide filled with sealing compound Grade 'B'

Labour only for cutting of grass, scrubs, herbs etc on shoulder of runway / PTT links by surface dressing n. exc 15cm deep in soft/ loose soil by using fawda incl stacking the grass a distance n.exc 50Mtr etc complete all as directed as site requirement by Engr-in-Charge. Note :- (i) Grass cutting work shall be done by manual labours with the help of fawda and purpose made tarwars. The contractor shall employ daily labours who will report to ATC every morning to ensure grass cutting work as per requirement of AF authority. (ii) The grass cutting work shall be carried out on runway, PTT, links and other aircraft manoeuvring areas used for flying. In case of an emergency the contractor and his labour shall be required to vacate the air field on very short notice. The tender shall allow for these contingencies in the quoted rates and no claim for any loss of men hours for any cause what so ever shall be entertained.

Labour only for cutting of grass, scrubs, herbs etc on shoulder of runway / PTT links using covered jungle gim to prevent spreading of grass in such a way that height of grass is maintained at a level n.exc 7.5cm from GL incl stacking the grass at a distance n.exc 50Mtr complete all as directed by Engr-in-Charge. Note : (i) Grass cutting work shall be done by mechanical means using jungle gim with cover to prevent spreading of grass on aircraft manoeuvring areas. The employed labour with machine/ equipment will report to ATC every morning to ensure grass cutting work as per requirement of AF authority. (ii) Grass cutting work shall be carried out in areas used for flying. In case of an emergency the contractor and his labour shall be required to vacate the air field on very short notice. The tender shall allow for these contingencies in the quoted rates and no claim for any loss of men hours for any cause what so ever shall be entertained.

Ditto as per item No 17 above but using bush cutters complete all as specified and directed

Surface dressing n.exc 30cm deep by mechanical means (Hydraulic excavator/JCB) including getting out and disposal of excavated earth outside the MOD land complete all as specified and directed.

M/s Sati Jasnath Enterprises (BID ID -3492333)

BHUSHAN BHIMRAO PATIL (BID ID -3492582)

AMBEY MAA CONSTRUCTION COMPANY (BID ID -3498308)