CONSTRUCTION OF C C ROAD FROM Dr B R Ambedkar Samudaya Bhavan TO SC COLONY AT BELAKUD VILLAGE IN CHIKODI TALUKA

CONSTRUCTION OF C C ROAD FROM Dr B R Ambedkar Samudaya Bhavan TO SC COLONY AT BELAKUD VILLAGE IN CHIKODI TALUKA

Scarifying Existing Granular Surface to a Depth of 50 mm by Manual Means

Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of ...

Construction of Granular Sub-Base of required grading asper design mixing in a mechanical mix plant at OMC, carriageof mixed Material to work site, spreading in uniform layerswith motor grader on prep...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

Providing and FixinLogo Board of PMGSY at Starting Point Providing and fixing of typical Logo board as per specifications and drawing. Two ACP Sheet of 3mm thick, top and Bottom plate duly welded/bo...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

Formwork ;Percentage on finished rate of concrete per m3, As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying ...