REPAIRTO TOILET AND KITCHEN INCLUDING REPLACEMENT OF PLUMBING FITTINGS AND REPAIR OF ROOF TO OFFICERS MARRIED ACCN AT MANEKSHAW MARG, URBAN VILLAGE AND CASSEL ROAD IN THE AREA OF AGE BR I UNDER GE EAST DELHI CANTT-10

Amount

Demolition in cement concrete of cement concrete in ground floor and paving not exc. 15 cm thick below or above ground level, complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key; scrubbing down with water, complete all as specified and as directed.

Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame), complete all as specified and as directed.

Demolition of Stone slab and tiles of any description or thickenss in floors, approans etc., complete all as specified and as directed.

Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed.

Dismantling of boarding of any description and any thickness, including cover fillets, complete all as specified and as directed.

Taking up or down 40mm to 50mm bore GI tubing and connections including refixing in old or new position, complete all as specified and as directed.

a) Dismantling of floor of bathroom and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc complete all as specified and as directed. b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (c) Provn of Glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top® Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. d) Provn of protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (e) Providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (f) Filling of sunken portion with 40 mm graded brick bats and finishing with 50 mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates, (Note : The area of Each bathroom/toilet portion is not exceeding 4.00Sqm each)

Plain cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate, as in roof kerb/benching, mud stops, OHT palteform and similar items including weathering, slightly rounded or chamfered angles and throating on top of chajjas, rails, cills etc., including necessary form work required if any, complete all as specified and as directed.

PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in PCC padding over roof, complete all as specified and as directed.

Cutting out cracks to V-section in existing roofs or terracing surfaces, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight), complete all as specified and as directed.

18-20mm thick Granite stone any type, (table rubbed and polished) in steps, shelves, and the like not less than 1Sqm (in one piece), laid over 20mm thick layer of cement mortar 1:3 after rougheniung of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including moulding of edges, complete all as specified and as directed.

18/19mm Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work as in shutters, shelves, sides, top, bottom of kitchen cabinets/Almirahs/Cupboards, complete all as specified and as directed.

2nd class Hard wood clean sawn plain fillets/beading/leaping square, rectangular or triangular in section not exceeding 3Sqcm, fixed with nails or brads, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS squqre tube. complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.

100mm size butt hinges (medium weight) stainless steel, complete all as specified and as directed.

Extruded aluminium alloy handles cast type anodised of size 150mm size, complete all as specified and as directed.

Aluminium anodized 150mm size barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

Continuous piano type hinges, mild steel bright finish or electro-galvanised with width of flaps 30mm, complete all as specified and as directed.

Hasp and staple safety type aluminium anodized with mild steel hinges pin including bolt to hinge plate and fixed with wcrews 100mm size, complete all as specified and as directed.

Magnetic ball catcher of brass body with 8mm dia stainless steel ball of approved quality, complete all as specified and as directed

40mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished, complete all as specified and as directed.

Brass handles 75mm size, cast type bright polished, complete all as specified and as directed

Telescopic channels 300mm long of chromium plated steel, superior quality with stainless steel ball rollers for fixing to cabinets drawers. complete all as specified and as directed

Wire brushing and cleaning top surface of tiles, cement concrete, including flashings and junction of parapets including taking out grass roots/vegetation, old APP membrane etc., from existing roof surfaces and cleaning the surface after drying from dirt, mortar, dust mortar buds, algae and all other foreign matter and brushed and wiped, complete all as specified and as directed.

Rendering 10mm thick on concrete surfaces in cement mortar 1:4 mixed with water proofing compound finished even and fair without using extra cement, complete all as specified and as directed. (Note : Water proofing compound shall be measured and separately).

Supply only liquid water proofing compound and mixed as per manufacturer's instructions, complete all as specified and as directed.

Applying evenly a tack coat of industrial bitumen 85/[email protected]/Sqm over a coat of bituminous primer applied @ 0.5Ltrs/Sqm to the cleaned concrete surfaces (before laying APP under Srl item 29 here-under), complete all as specified and as directed.

Applying APP based polymeric mambrane minimum weight 3.0kg/Sqm and of minimum thickness 3mm, reiforced with polyster non woven fabric ( weight not less than 150gm/Sqm ). APP membrane will be laid over primed surface with forced application by torch application as per manufacturer's instructions across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane. At parapets the membrane shall be taken up to suitable height as directed by the Enfgr-in-Charge and shall be inserted in the parapet wall by making suitable groove of size 75mm wide and 30mm deep in parapet wall and shaping horizontal face of groove with cement mortar 1:3 including applying two coats of aluminium paint, complete all as specified and as directed.

Taking down existing celing any type and any description and provn of E-board 4mmthick self design type tiles ceiling on GI Powder coated channel/Tee/Grid of make(Armstrong or equivalent) frame work with the following specification including cutting holes to brick wall built in cement mortar & making good in cm 1:3 of cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as required :- (a) Plugging to wall around the rooms & supplying & fixing GI Powder coated angle of size 25mm x 25mm x 1.0 mm (b) Providing 1.60mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasterers. (c) Providing 25mm x 25mm x 1.5mm GI Powder coated tee as in main & cross members at 595mm c/c supported suspenders alongwith adjustable clamp to maintain level. ( d) Providing E-board 4mmthick self design type ceiling tiles of size 595mm x 595mm confirming to relevant IS in squares of GI Powder coated Tee with clips made to shape. Shade and pattern of E- board shall be as approved by GE.

Vitrified Ceramic light shade Coloured tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles n exceeding 0.36sqm as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4, complete all as specified and as directed.

Anti skid ceramic coloured floor tiles, 7-8mm thick, size of ech tile exceeding 0.06Sqm but not exceeding 0.11Sqm as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in cement mortar 1:4, complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 600mm x 300mm x 7mm thick set and joint in neat cement slury and pointed in white or colour cement to match laid over 10 mm thick screed bed in CM 1:4, complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a layer of Birla white wall care putty finished even amd smooth with sand papers, complete all as specified and as directed.

Complete removal of existing treatment on old treated surfaces of walls and applying two coats of oil bound distemper over a layer of Birla white wall care putty finished even amd smooth with sand papers, complete all as specified and as directed.

Providing scaffolding system on the exterior side, upto eight storey height made with MS tube stiffened with suitable bracing, runners connecting with the building for making working platform upto requisite height and required location with essential safety measures for the workman etc. complete as per direction and approval of Engr-in-charge. (Note : The elevated area only of the scaffolding shall be measured for payment purpose).

CPVC pipes of pressure rating 10kgf/sqcm, cutting chases with electric operated diamond blade cutter by highly skilled pipe fitters,removal/replacement of existing water supply tubing for addition and alteration incl screwing existing tubing for in position with or without taking down for 15-20 mm size pipe, jointing using weld solvent system as per manufactures with all necessary brass threaded fittings of the similar make, making good the existing finishes, complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, including taking up or down steel tubing and connections for cleaning or refixing and removal off the site, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, including taking up or down steel tubing and connections for cleaning or refixing and removal off the site, complete all as specified and as directed.

25mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs, including taking up or down steel tubing and connections for cleaning or refixing and removal off the site, complete all as specified and as directed.

Cast iron spun soil waste and vent pipes 100mm dia, in any length, with cement joints, laid in trenches/floors, fixed to walls with CI/MS holder bat clamps and conforming to IS-1729, including dismantling of old CI pipes, complete all as specified and as directed.

Cast iron spun soil waste and vent pipes 75mm dia, in any length, with cement joints, laid in trenches/floors, fixed to walls with CI/MS holder bat clamps and conforming to IS-1729, including dismantling of old CI pipes, complete all as specified and as directed.

CI bend for 100mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.

CI bend for 75mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.

Vitreous china wash down water closet pan (pedestal pattern) excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixed in repairs, complete all as specified and as directed.

Plastic water closet seat, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device, fixed in repairs, complete all as specified and as directed.

PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved, fixed in repairs, complete all as specified and as directed.

PVC connection 15 mm size with PTMT nuts 450mm long, fixed in repairs, complete all as specified and as directed.

Wash basin, Vitreous China white flat back of size 550mmx400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and procelain stopper but including brackets, fixed in repairs, complete all as specified and as directed.

Waste fitting 32mm size of CP Brass for WHB with long screwed shank with nut, fixed in repairs, complete all as specified and as directed.

Wall mixer 3 in 1 inlet system with provision of both shower (hand shower and over head shower) complete with suitable long bend pipe connecting leg ,CP flange etc., fixed in repairs, complete all as specified and as directed.

Chromium plated brass WHB mixer with long shank screwed down high pressure with capstan head with lettered 'Hot' and 'Cold' for iron pipe 15mm bore, fixed in repairs, complete all as specified and as directed.

32 mm flexible PVC waste pipe fixed to WHB and urinals, ( Note minimum length of each pipe should not be less than 1.20RM), fixed in repairs, complete all as specified and as directed.

Angle valve with flange 15mm bore of pipe, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repair, complete all as specified and as directed.

15mm bore two way bib tap with flange chromium plated brass, Fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

15mm bore bib tap chromium plated brass, Fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs (Minimum weight 90gms), complete all as specified and as directed.

PTMT Grating dome 100mm dia with or without hole for waste pipe fixed in repairs, complete all as specified and as directed.

CP brass shower rose 150mm size fancy type with or wothout swivel joint, including fixing to 15mm bore pipe, fixed in repair, complete all as specified and as directed.

Chromium plated brass Health faucet with one metre long flexible tube in chrome finish fixed in position with brass chromium plated nuts for 15mm bore tubing, fixed in repairs, complete all as specified and as directed.

Chromium plated brass soap dish fancy type, fixed in position to walls with PVC gutties and brass screws, complete all as specified and as directed.

Corner Glass Shelf of 5.5mm thick sheet glass of size 225mm x 225mm including screws and bracket fixed in position, complete all as specified and as directed.

Sheet Glass shelf fancy type, having 5mm thick sheet glass shelf 12cm wide with aluminium alloy guard railing 60cm long with CP brass brackets, fixed in repairs, complete all as specified and as directed.

Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated brass, fixed with and including chromium plated brass screws and wooden / plastic cleats, fixed in repairs, complete all as specified and as directed.

Chromium plated brass towel ring round with round flange fixed with screw to wall, fixed in repairs, complete all as specified and as directed.

CP brass toilet paper holder with stainless steel flap fixed to wall with CP brass screws and PVCgutties, fixed in repairs, complete all as specified and as directed.

PVC(SWR) pipes 110mm bore size single socketed, in any length with rubber ring joints,laid in trenches or in floors or walls including fixing clamps, complete all as specified and as directed.

PVC (SWR) bend of 110mm bore any radius, complete all as specified and as directed.

20mm bore gun metal gate or globe valve with iron whel head, screwed both ends for iron pipe, fixed in repairs, complete all as specified and as directed.

25mm bore gun metal gate or globe valve with iron whel head, screwed both ends for iron pipe, fixed in repairs, complete all as specified and as directed.

Plate Rack made of stainless steel 1mm thick for kitchen fixed in walls with rawl plugs and stainless steel screws, over all size 900mm x 750mm x 250mm, fixed in repairs. complete all as specified and as directed.

Sink with draining board made of stainless steel 0.8mm thick for kitchen or laboratory with plugs, washer and wastes, including in cement mortar to dwarf wall or including fixing cantilever brackets and connnecting union to pipe over all size 915mmx460mm bowl size 410mmx330mmx160mm with all fitting and fixture, fixed in repairs, complete all as specified and as directed.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

tomar and associates

Baljeet Builders & Interior Decorators