SPL REPAIR TO INTERNAL ROADS OF AATS AGRA UNDER GE (EAST) AGRA

Amount

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for Scarifying or picking gravelled exc 50mm but not exc 100mm deep, macadam or bituminous macadam surfaces in area nexc 400 sqm and removing dabris outside MoD land complete all as specified and directed.

M & L for 100 mm thick (compacted thickness) WBM, with (lime stone, sand stone, flint or quartzite) coarse aggregate of grading 1 (90 to 40 mm size), spread rolled and consolidated to gradient and camber required by using 8 to 10 Tonne power roller, complete all as specified and directed.

M&L for Preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

Applying evenly a priming/tack coat with mechanical sprayer over old WBM surfaces with bituminous primer (VG-10) at 10kg per 10 sq metre complete all as specified and directed.

M&L for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom & finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc complete all as specified and directed.

Applying evenly a priming/tack coat with mechanical sprayer over old black top surfaces with bituminous primer (VG-10) at 5kg per 10 sq metre complete all as specified and directed.

M&L for premixed bituminous macadam using paving bitumen of VG-30 grade with binder content 4% by weight of total mix and complacted to required gradient and camber laid by mechanical paver (consolidated thickness 50 mm or less) with 8 to 10 tonne power vibrator road roller etc complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot mix plant by using design mix and transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis as metioned in baove item if there is any vatiation in the actual binder content used, the rate shall be adjusted lowerside of binder used however no price adjustment shall be made of the binder content percentage is more as specified above.

Material & Labour for 30 mm thick (consolidated average thickness) bituminous premix asphaltic semi dense concerete with 5.5% % binder (of paving bitumen VG-30) content by weight of total mix, rolled & compacted with 08 to 10 tonne power road rolled to required camber and gradient complete all as specified and directed (Laying of bituminous premix asphaltic semi dense concrete with mechanical paver) complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot mix plant by using design mix and transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis as metioned in baove item if there is any vatiation in the actual binder content used, the rate shall be adjusted lowerside of binder used however no price adjustment shall be made of the binder content percentage is more as specified above.

M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minium 2.5 mm thick single coat as a centre line or edge line etc road marking of 150/100 mm width using 'HOT MARK' thermo plastic paint (Hot application white/yellow by indenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter filler etc, thermoplastic requirement for glass beads shall be conforming to BS-6086 of MOST specification including spraying of glass beads etc complete all as per manufactures instructions and as directed by Engineer incharge

Supply and fix in repair solar cat eye aluminium alloy shall (100% water proofing design according to IP 67) of size 125 mm x 125 mm x 25 mm (shank 65 mm) of high efficiency mono crystalline solar panel 2.4 V / 0.3 watt one Ni-mh or NI-cd rechargeable battery (1.2 V / 1600 MA) consisting of 06 Nos super bright LED with 10000 to 18000 mcd completed as per manufactures instructions etc. complete all as specified and directed. Make DA-110 (Dhruv) of dark eye or equivalent.

Dismantling of interlocking tiles of any thickness in floor/ paving in any depth etc complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing dabris outside MoD land complete all as specified and directed.

Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sub base of flooring of 75 mm thickness complete all as specified and directed.

M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;in repair complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles and removing dabris outside MoD land complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 incomplete all as specified & directed

M&L for 15 mm thick rendering in CM 1:4 on brick or concrete surface finished even and fair complete all as specified and directed.

M&L for Preparation of newly plastered wall surfaces and applying three coats of white washing complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Supply and fixing in repair convex mirror 80 CM fix to 50 mm dia MS pipe including stand / padestal embedded in PCC block 1:2:4 type B-1 (using 20 mm graded stone aggregate) size 45 x 45 x 60 cm and including necessary earth work & form work complete all as specified and directed.

M&L two coats of synthetic enamel paint over a coat of primer on new concrete /kerb surfaces stone including prepartion of surfaces complete all as specified and directed.

M/s Salim Mohomad (BID ID -3153159)

Rahul Construction Co (BID ID -3152735)

Attar Singh and Sons (BID ID -3153359)

M/S OMKAR SINGH YADAV (BID ID -3158029)

HARI BUILDERS (BID ID -3153094)

Gupta Automobiles (BID ID -3150024)