Construction of Mali Hut at Uchapind Nursery, Social Forestry Range Basohli of Social Forestry Division Kathua under CAMPA for the year 2022-23.

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables, etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m including getting out excavated earth and disposal of surplus excavated earth as directed lead upto 1mtr. from cutting edge. a) All Kind of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 Cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) (including all lead and lift carriage of material by MT/HL)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (including all lead and lift carriage of material by MT/HL)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring ,shuttering, finishing and reinforcement. All work upto plinth level with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size). (including all lead and lift carriage of material by MT/HL)

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand) (including all lead and lift carriage of material by MT/HL)

Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level (including all lead and lift carriage of material by MT/HL)

Steel Reinforcement for R.C.C. work including straightening, cutting bending, pacing in position and binding all complete above plinth level. A) Cold twisted bars.

12mm cement plaster of mix. 1:6 (1 cement:6 fine sand) (including all lead and lift carriage of material by MT/HL)

15mm cement plaster to ceiling of mix. 1:6 (1 cement:6 fine sand). (including all lead and lift carriage of material by MT/HL)

Centering and shuttering including strutting, propping etc.and removal of form work for : a) Foundation, footings, bases of columns etc. for mass concrete.

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded.

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. a) 50mm thick with zinc coating not less than 275gm/m2

Cement concrete flooring 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate) finished with a floating of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete(including all lead and lift carriage of material by MT/HL)

Providing and fixing 1 mm thick M.S. steel sliding-shutters with frame and diagonals bnces of 40x40x6mm angle iron, 3mm M.S. gusset plat~s at the junction and corners 25mm dia pulley, 40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer,

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including priming coat of whiting to give an even shade

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :-

Sand and Stone aggregate (Crusher bajree) below 20mm nominal size from Billawar Crusher for an average lead of 40..00 Km. by M.T.

Stone aggregate 40mm nominal size & above from Billawar Crusher for an average lead of 40.00 Km. by M.T.

Brick from Hiranagar for an average lead of 60.00 Km. by M.T.

M/S TARIRO RAM

Sandeep Tidyal Contractor

Sher Mohd

Abdul Rouf