REPAIR/MAINTENANCE OF MAP AND TRADE PATTERN FURNITURE AT BSO FURNITURE YARD UNDER GE SUKNA

Amount

Supply & replacement of following unserviceable items of Charpoy with hard top complete all as specified and as shown in drawing No - FD/MAP-II/01 shown in drawing and as directed.

Plywood top 12mm thick BWR ISI marked plywood of size 6’6”x3’.

25 mm x 25mm (Square pipe 16 gauge) stiffeners duly 2 coat painted by spray gun machine

32 mm x 32 mm MS tube legs (16 Gauge) duly 2 coat painted by spray gun machine

25 mm x 60mm x 6 mm MS cleat welded with frame to support ply

Hard Rubber shoes

32 mm x 32 mm x 5 mm MS plate

Supply & replacement of following unserviceable items of Table Bed side MAP complete all as specified and as shown in drawing No - FD/E6/MAP/15 (R) and as directed.

18mm thick prelaiminated particle board top with PVC edging fixed to frame

6mm ply screwed to h/w stopper

Front side 18mm MS square frame work pipe duly 2 coat painted by spray gun machine

Back side 18mm MS square frame work pipe duly 2 coat painted by spray gun machine

Lower Drawer on T/W runner.

teakwood runner fixed with screw

Drawer Handle

Hard rubber shoes

Supply & replacement of following unserviceable items of Mirror dressing gents complete all as specified and as shown in drawing No - FD/E6/MAP/16 and as directed.

5.5mm thick looking mirror including back ply duly french polished 2 coat

50" x 28" teak wood frame all around the mirror duly french polished 2 coat

38 mm x 38 mm Teak wood leg duly french polished 2 coat

75mm long hinges

Glass shelves

Supply & replacement of following unserviceable items of Table dining 6 persons complete all as specified and as shown in drawing No - FD/MAP-II/03 and as directed.

Top shall be made out of 18mm thick prelaminated particle board.

90 mm x 45mm leg made out of teak wood duly french polished 2 coat

100 mm x 100 x 35 mm bracket made out of teak wood duly french polished 2 coat

150 mm x 30 mm x 5 mm MS right angle screwed with long rail & rail duly 2 coat painted by spray gun machine

45 mm x 90 mm short rail made out of teak wood duly french polished 2 coat

Nylon buffers

Supply & replacement of following unserviceable items of Chair dining JCOs/ORs complete all as specified and as shown in drawing No - FD/MAP-II/05 and as directed.

30 mm x 55 mm rear leg made out of teak wood duly french polished 2 coat

55 mm x 30 front leg made out of teak wood duly french polished 2 coat

30 mm x 65mm front rail made out of teak wood duly french polished 2 coat

30 mm x 65 mm rear rail made out teak wood duly french polished 2 coat

30 mm x 65 mm side rail made out teak wood duly french polished 2 coat

20 mm x 25mm Stiffner made out of teak wood duly french polished 2 coat

4mm thick PVC seat with holes & screwd.

Nylon buffer

Supply & replacement of following unserviceable items of Chair Computer complete all as specified and as shown in drawing No - FD/E6/MAP/01 and as directed.

Hydraulic system

Seat & back

wheel

Supply & replacement of following unserviceable items of Table Computer complete all as specified and as shown in drawing No FD/E6/MAP/03 and as directed.

Top shall be made out of 18mm thick prelaminated particle board Exterior grade with 4mm thick teak wood beading all around

Drawer made out of 18mm thick prelaminated particle board Exterior grade.

Drawer channel MS fixed with screw

Nylon buffer

Supply & replacement of following unserviceable items of Bed Hard complete all as specified and as shown in drawing No - FD/E6/MAP/08 (R) and as directed.

12mm BWR ISI marked plywood top of Make:Green ply/Archidply/Century ply.

Head rest made out of 18mm thick prelaminated particle board Exterior grade.

Foot Rest made out of 18mm thick prelaminated particle board Exterior grade.

Hard rubber shoes

25 mm x 25 mm Square pipe (18 Gauge) MS

Supply & replacement of following unserviceable items of Chair writing complete all as specified and as shown in drawing No - FD/E6/MAP/12 and as directed.

Seat foam cushion 32 density duly covered with tapestry approved by GE/Engr-in-charge.

Back foam cushion 32 density duly covered with tapestry approved by GE/Engr-in-charge.

Arm rest

Rubber stopper

Supply & replacement of following unserviceable items of Rack shoes steel complete all as specified and as shown in drawing No - FD/E6/MAP/02(R) and as directed.

Main frame of 25mm MS pipe (18 Gauge) duly painted with 2 coats of synthetic enamel paint by spray gun machine

Hard rubber shoes

Supply & replacement of following unserviceable items of Chair school with hand board complete all as specified and as shown in drawing No - FD/E6/MAP/05 and as directed.

Top shall be made out of 18mm thick prelaminated particle board Exterior grade with PVC edging all around

Hinges made of 75x50mm MS flat welded with 100mm long pipe of 20mm dia

PVC Seat back (one piece)

Supply & replacement of following unserviceable items of Almirah large steel complete all as specified and as shown in drawing No - FD/E6/MAP/18 and as directed.

20 gauge MS sheet base duly 2 coat painted by spray gun machine

MS Handle Chrome plated 100 mm long.

Brass Lock

Ms Hinges 75 mm long .

Shelves of 20 gauge MS sheet duly painted with 2 coats of synthetic enamel paint by spray gun machine

Supply & replacement of following unserviceable items of Chair dining Officers complete all as specified and as shown in drawing No - FD/MAP-II/04 and as directed.

35 mm x 50mm front leg made out of teak wood duly french polished 2 coat

35 mm x 50mm rear leg made out of teak wood duly french polished 2 coat

65 mm x 25 mm front rail made out of teak wood duly french polished 2 coat

90 mm x 25 mm rear rail made out teak wood duly french polished 2 coat

65 mm x 25 mm side rail made out teak wood duly french polished 2 coat

20 mm x 25 mm Stiffner made out of teak wood duly french polished 2 coat

Seat foam with cushion 32D duly covered with tapestry approved by GE/Engr-in-charge.

Nylon buffer

Supply & replacement of following unserviceable items of Chair Verandah complete all as specified and as shown in drawing No - FD/MAP-II/15,FD/MAP-II/06 and as directed.

Welding of dislocated joint of the seat frame with legs (Each joint)

PVC seat and back of existing chair verandah. Note :- One seat and one back shall be treated as one unit.

Hard plastic shoes

Supply of following items of Sofa Set complete all as specified and as shown in drawing No - FD/MAP-II/02 and as directed.

Foam Cushion of 32 density duly covered with best quality tapestry not less than Rs. 250.00 per meter all as per drawing and directed by Engineer-in-charge. Make of Foam Cushion : Sleepwell/Kurlon/Featherfoam

Repair to Desk with Bench 2 seater(Type-I,II) : Supply and replacement of following unserviceable items of Desk with bench 2 seater (Type-I,II) complete all as specified and as shown in drawing.

M & L for 25 mm square pipe frame rectangular of size 90x25 cm to support writing top and fixed to base frame with suitable welding including necessary rubber caps to open end of square pipe and including removal of unserviceable frame of any description

M & L for writing top 110x40 cm made from 18 mm Green panelmax Exterior Grade-I Medium Density Fiber (MDF) board both side laminated with colour electric blue fixed to frame with required nut & bolts all as required or directed by Engr-in-charge including removing of unserviceable writing top of any description

M & L for bag shelf of size 90x25 cm made from 18 mm Green panelmax Exterior Grade-I Medium Density Fiber (MDF) board both side laminated with colour electric blue fixing with nut & bolts with square pipe leg including removing of unserviceable bag shelf of any description

M & L for front leg rectangular frame 58/55 cmx 20 cm (16 gauge) made from 25 mm square pipe to supporting writing top frame and bag shelf including necessary rubber caps to open end of square pipe all as required and including removing unserviceable front leg frame of any description

M & L for front cover 90x 25cm between writing top and bag shelf made from 12 mm Green panelmax Exterior Grade-I Medium Density Fiber (MDF) board both side laminated with colour electric blue fixed with nut bolt to front leg frame including removing of unserviceable front cover of any description

M & L for base frame rectangular of size 100x90 cm made from 25 mm square pipe (16 gauge) to support front & back leg frame fixed with suitable welding and adjustable screw with hard rubber 04 Nos including necessary rubber caps to open end of square pipe as required or directed by Engr-in-charge including removing of unserviceable base frame of any description

M & L for back leg frame of size 30x20 cm made from 25 mm square pipe (16 gauge) to support desk seat fixed to base fram with suitable welding all as specified or directed by Engr-in-Charge including removing of old unserviceable back leg frame of any description

M & L for 25 mm square pipe (16 gauge) frame rectangular of size 90x25 cm to support desk seat & fixed to back legs with suitable welding and necessary rubber caps to open end of square pipe all as specified or directed by Engr-in-charge including removing of old unserviceable square pipe frame of seat

M & L for desk seat of size 100x35 cm made of 18 mm Green panelmax Exterior Grade-I Medium Density Fiber (MDF) board both side laminated with colour electric blue fixed to back leg frame with nut & bolt all as specified or as directed by Engr-in-charge including removing of old unserviceable sitting seat of any description

M & L for back support frame rectangular of size 100x40 cm made from 25 mm square pipe (16 gauge) fixed to seat frame with suitable welding including necessary rubber caps to open end of square pipe all as required or as directed by Engr-in-charge and including removing of old unserviceable back support frame of any description

M & L for back support of size 110x20 cm made from 18 mm Green panelmax Exterior Grade-I Medium Density Fiber (MDF) board both side laminated with colour electric blue, fixed to back support frame with nut & bolts all as specified or as directted by Engr -in-charge including removing of old unserviceable back support.

Replacement of 25 mm square pipe upto 90 cm length at any portion/location of existing bench including necessary welding and removing of unserviceable pipe etc. all as required complete all as specified and directed.

Scrapping/Cleaning and removing old rusted paint from Desk with Bench (Type -II) steel and painting the Desk complete by spray paint with two coats of Gray synthetic enamell paints over one coat of Red oxide primer complete all as specified and directed.

Meterial & labour after cleaning/scrapping off the following items of furniture & polishing the same with one coat of french polish duly preparing the smooth surface to the entire satisfaction of Engr-in- Charge/GE.

Table dining 6 persons

Table dining 4 Persons

Chair dining JCOs/Ors

Sofa Set 5 seater

Chair Dining Officers

Material and Labour for preparation of old painted surface and applying a coat of synthetic enamelled paint 1st quality of Olive Green (OG) black on steel surface (inside or outside) by spray Gun Machine complete all as specified and as directed by Engr-in-Charge for the following items :-

Almirah large steel

Charpoy with hard top

Table bed side

Table Computer

Chair Verandah

Bed Hard

Vikash Steel Industries (BID ID -3498623)

HINDUSTAN ENGINEERING WORKS (BID ID -3502013)

M/S B K ROY (BID ID -3501109)

GEETA CONSTRUCTION (BID ID -3500984)

M/S B B CONSTRUCTION (BID ID -3501550)