REPAIRS TO ROOF TREATMENT TO ACCESSIBLE AND NON-ACCESSIBLE BUILDING UNDER DSC COMPLEX, QRSAM, ASL LABS UNDER AGE B/R-I, KANCHANBAGH, HYDERABAD

Amount

Demolition of cement concrete in any position including removal of any type of old treatment, tarfelt & debries etc complete all as specified & directed by Engr-in-Charge.

Demolition of Cement Concrete (Reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for and removing the same from Site(s), complete all as specified and as directed.

Dismantling of existing AC (corrugated, semi corrugated etc) roof covering sheet complete all as specified and as directed.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated /trepezoidal steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in ridges fixed with self tapping screws complete all as specified and as directed.

Cleaning of Roof gutter including water outgoing holes at any hight of bldg,work shop and hangers and removing the materials leaves, vegitation mud or oter waste materials to distance n exc 50m, complete all as specified and directed by Engineer-in-Charge.

Cutting /removing of plants and grass growth on bldg's roofs, chajjas and edges on bldgs,work shop, hangers (at any floor and any height) including spreding chemicals at plant roots area and finished the damaged area with PCC (1:2:4) cement plaster in CM (1:4) as required and remove the waste to a distance n exc 50m, complete all as specified and directed by Engineer-in-Charge.

Cleaning of Roof sorrounding area of mud, tree leaves etc including water outgoing holes at any height of bldg, removing the materials (sludge) to distance n exc 50m, complete all as specified and directed by Engineer-in-Charge.

Cleaning of drains by excavating of the filled earth. Vegetation and all forged material average width 45 cm & depth 50cm and removing the excavated material to a distance exc. 50m and not exc. 250m complete all as specified and as directed.

M&L Brick work with sub- class 'B' class bricks straight or curved on plan exc 6m mean radious in CM (1:6), including demolition of brick work complete all as specified and directed by Engineer-in-Charge.

Disconnecting of existing tanks, setting aside (or lowering if required) for repairs etc and holding if required reconnection and refixing in position, capacity of tank exc 250 & n.exc 500 Ltrs capacity complete all as specified.

All as per srl item No.11 above but for capacity of tank exc 500 & n.exc 1000 Ltrs capacity complete all as specified.

M&L for 40mm thick PCC type B0, (1:2:4) (using 12.5 mm graded stone aggregate) as in padding in roof complete all as specified. Note: (Work shall be carried out upto G+2 storey bldg, contractor to quote rates accordingly)

M&L for cement screed/rendering 10mm thick in C.M (1:3) over roof slab including parapets inverted beams etc. mixed with water proofing compound, rendering all as specified and directed (WPC shall be measured and paid separately and finished even and smooth without using extra cement complete all as directed by engr-in- charge. Note:- WPC will be measured & paid separately.

M&L for APP based polymeric membrane minimum weighing 3Kgs/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) over a coat of hot bitumen 85/25 grade applied @ 1.20 Kg/Sqm after priming the surface with bitumenious emulsion (tack coat) @ 100 gms/sqm with 10 cm overlap of the membrane to be provided duly fused uniformly by LPG torch flame complete all as directed .

M&L for preparation of surfaces and applying one coat of aluminium paint @ 100 ml/sqm over APP membrane all as specified and directed.

Supply only liquid water proofing compound.

Waterproofing for terrace: (i) Cleaning the surface areas thoroughly so that they are free of all contaminants like dirt and laitance & to remove all the loose materials by various mechanical means. Removal of all surface Imperfections, protrusions, loose concrete & filling of cracks using Seal PU or Polymer Modified Mortar in the ratio Seal Crete : Cement : Sand (1 : 2 : 5 ) . (ii) Providing and making vata at the junction of the walls and the slabs using PMC mortar in the ratio of Seal Crete : Cement : Sand (1 : 2: 5 ) using SBR Latex as the bond coat. (iii) Correct all construction joints by grouting wth grout IP at 1m apart and opening of joints in "V" cut groove and fill with PMC mortar, using SBR Latex as the bond coat. (vi) Providing and applying brush applied water based PU dispersed polymer modified Elastomeric liquid membrane, Urethane BTD with Zero VOC to form the membrane in situ at site with 3 layers of monolithic, seam less finish having > 500% elongation The first layer is to be apply primer @ 200 Gms per Sqm and shall act as the prime coat to fill in the cavities. This can be brush or roller applied. For spray application, using any airless spray system with recommended nozzle size at 30:1 at 2 bar pressure.

(v) Providing and applying the second coat @ 1 kg per Sqm using the soft brush, roller or Spray system with the recommended nozzle size on to the primed surface. Providing and applying 45 Gsm Fiber cloth over the 1 st coat,when substrate till the coat is tacky Providing and applying 3 rd coat @ 1 kg per Sqm to finish the application for a thickness of 1.5 mm membrane formed in place. The second coat should be applied perpendicular to the first coat for cross linkage and complete as per the specification. (vi) Top Screed modified with Integral Waterproofing Chemical: Placing a seperation layer of 120 GSM geotextile fabric over the waterproofing membrane and carrying out sloping screed on top of it over the with cement modified @ 0.4% with Manufacturer plast LW+ for waterproofing.

Notes: - 1. To be applied by the representatives of manufacturers authorized applicator only. Contractor has to provide manufacturer’s test certificate for the above mentioned Technical parameters and purchase Vrs. 2. Removal of existing treatment to be paid separately. 3. Roof top to be ensured to avoid water ponding. 4. For accessible terrace and inaccessible terrace, 300mm height of vertical surface/ parapet wall to be treated with same specification of slab. Make: - STP , Bostik, Berger, Fosroc, Sika, Asian or any other make approved by E-in-C’s Branch for PU based water proofing treatment.

M&L PCC (1:2:4) type B-0 (using 12.5 mm grade stone agg)as in roof kerbs,mud stops, rounded or chamfered on edges complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framework of water tanks and similar work conforming to Fe- 290. Gde E-165

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe-290 (Gde E?165) etc .

Preparation of two coats of synthetic enamel paint with one coat of red oxide primer on new or previously untreated steel surface of any description over 10 cm in width or girth not otherwise described

S&F 3mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc.

Dismantling of old Wall and ceiling boards (fibre, pulp, insulation,etc.)or insulation boards/slabs/ blankets, any thickness, including cover fillets

S&F 12mm thick glass reinforced gypsum (GRG) ceiling tiles of size 595 x 595mm of approved design fixed with powder coated (powder coating on web bottom only) GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm) and powder coated GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x 595mm with 4mm dia GI wire suspender including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrangement with grid size 60x120cm complete all as specified and directed by Engineer - in -Charge.

S&F 12mm thick glass reinforced gypsum (GRG) ceiling tiles of size 595 x 595mm of matching design fixed in existing frame at any height complete all as specified and as directed by Engineer-in-Charge. Make : Diamond Brand TM/ Dexune

M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping and applying one coat of oil emulsion distemper complete all as directed.

M&L for preparation of old distempered surfaces of ceilings by washing, rubbing down and stopping and applying one coat of oil emulsion distemper complete all as directed.

M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping and applying one coat of weatherproof antifungal exterior paint complete all as directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed.

S & F PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors including taking down old pipe complete all as directed.

S & F PVC (SWR) pipes 150mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors including taking down old pipe complete all as directed.

S&F 150mm PVC (SWR) bends with access door of any radius all as specified & directed.

M & L for PCC (1:2:4) type B-2 (using 40 mm graded stone aggregate) of 100 mm thick as in plinth protection / Path / PCC floor, finished even and fair, complete all as specified and as directed.

Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re- fixing or removal to store

S&F 15 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc

Taking up or down steel tubing of 20 bore and connections, including cleaning for re- fixing or removal to store

S&F 20 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc

Taking up or down steel tubing of 25 mm bore and connections, including cleaning for re- fixing or removal to store

S&F 25 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc

S&F in repairs 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repairs 25mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repairs 25mm bore Ball valves high pressure of PTMT with epoxy coat ed Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms)

Cleaning and removing all scale and dirt, etc, from tanks of exc 500 & nesc 1000 ltr capacity and from mouths of circulating pipes, etc

M&L for 1000 ltr capacity Rotational moulded polyethylene water storage tanks tripple layer ISI Mark (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl dismantling of old tanks.

sri vishnu enterprises (BID ID -3413931)

Sai construction & services (BID ID -3413884)

Maruthi international (BID ID -3413640)

K CHANDRAPAL REDDY (BID ID -3398987)

M/s ANUSHA ENTERPRISES (BID ID -3413678)

PAVAN ENTERPRISES (BID ID -3413561)

SM CONSTRUCTIONS (BID ID -3413920)

Anjana corporation (BID ID -3413824)

M/S PAVANI ENTERPRISES (BID ID -3412616)

SRI SAI ENTERPRISES (BID ID -3413781)

M/s K Venkateswara Rao (BID ID -3413734)