Construction of veternary Dispensary Class-1 By Abolishing Old building and Providing Furniture,Work Water Supply and Other Works At.Kurula, Tq.Kandhar ,Dist. Nanded

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means Bd.A.1 Page No.259 SSR OF 2022-23 ITEM NO.21.01 & PAGE NO.153

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Manual Means Bd.A.1 Page No.259 SSR OF 2022-23 ITEM NO.21.03 & PAGE NO.153

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.As directed by Engineer in charge SSR OF 2022-232 ITEM NO.21.22 & PAGE NO.155

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per One Square Metre of vertical surface area covering 10 years guarantee on bond paper. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO.21.23 & PAGE NO.155

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 0.5 percent of clorophyrifos per One Square Metre of surface area. As Directed by Engineer in Charge. SSR OF 2022-23 ITEM NO.21.24 & PAGE NO.156

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As Directed by Engineer Charge. SSR OF 2022-23 ITEM NO.21.40 & PAGE NO.157

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.E.1 Page No.287 SSR OF 2022-23 ITEM NO.24.01 & PAGE NO.175

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.F.3 Page No.298 and B.7 Page No.38 SSR OF 2022-23 ITEM NO.25.11 & PAGE NO.178

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. Bd.F.5 Page No.300 and B.7, Page No.38 SSR OF 2022-23 ITEM NO.25.31 & PAGE NO.179

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) Bd.F.6 Page No.300 and B.7, Page No.38 SSR OF 2022-23 ITEM NO.25.50 & PAGE NO.181

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. Bd.F.8 Page No.302 and B.7, Page No.38 SSR OF 2022-23 ITEM NO.25.70 & PAGE NO.182

roviding and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.F.9 Page No.303 and B.7, Page NO.38 SSR OF 2022-23 ITEM NO.26.05 & PAGE NO.184

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.F.11 Page No.304 and B.7, Page No.38 SSR OF 2022-23 ITEM NO.26.17 & PAGE NO.185

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap /quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. Bd.F.13 Page NO.305/I.S. 456 (2000 SSR OF 2022-23 ITEM NO.26.25 & PAGE NO.185

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17 Page No.306 SSR OF 2022-23 ITEM NO.26.33 & PAGE NO.188

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Bd.A.11 Page NO.263 SSR OF 2022-23 ITEM NO.21.37 & PAGE NO.157

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Bd.G.1 Page No.313 SSR OF 2022-23 ITEM NO.27.01 & PAGE NO.197

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Bd.G.5 Page No.315 SSR OF 2022-23 ITEM NO.27.05 & PAGE NO.197

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. Bd.G.7 Page No.316 SSR OF 2022-23 ITEM NO.27.06 & PAGE NO.194

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red /Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. As Directed Engineer In Charge SSR OF 2022-23 ITEM NO.33.68 & PAGE NO.220

Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness lipped with 15 mm ( 5mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5mm x 2) thick x 30 mm width on other style and bottom rails. The inner panels laminated with 2 mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 mm plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etc. as per direction of Engineer in charge and manufacturers specification and drawing etc. complete. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO.39.48 & PAGE NO.256

Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.39.58 & PAGE NO.257

Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). Bd.T.57, Page No.511 SSR OF 2022-23 ITEM NO.39.26 & PAGE NO.249

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.39.37 & PAGE NO.251

Providing and fixing in position aluminium openable window of any size as per detailed drawing and as directed by Engineer in charge with all necessary aluminum sections including necessary fixtures and fastening with 5 mm thick clear float glass etc. complete. a) With colour anodizing Note While arriving at the rate of item of item weight at 6.90 Kilogram/ One Square Metre is considered.As Directed By Engineer In Charge SSR OF 2022-23 ITEM NO.39.50 & PAGE NO.256

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Bd.U.1 Page No.537 SSR OF 2022-23 ITEM NO.40.01 & PAGE NO.264

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. As Directed By Engineer in Charge: SSR OF 2022-23 ITEM NO.32.26 & PAGE NO.210

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Bd.L.2 Page No.368 SSR OF 2022-23 ITEM NO.32.05 & PAGE NO.209

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.32.34 & PAGE NO.212

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Bd.L.7 Pageno.369 SSR OF 2022-23 ITEM NO.32.11 & PAGE NO.209

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. As directed by engineer in Charge

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Bd.M.12 Page No.385 SSR OF 2022-23 ITEM NO.33.40 & PAGE NO.217

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete Bd.M.12 Page No.385 SSR OF 2022-23 ITEM NO.33.41 & PAGE NO.2017

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Bd.M.13 Page No.386 SSR OF 2022-23 ITEM NO.33.25 & PAGE NO.215

Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Bd.M.13 Page NO.386 SSR OF 2022-23 ITEM NO.33.26 & PAGE NO.215

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Bd.M.22 B/Page No.390 SSR OF 2022-23 ITEM NO.33.35 & PAGE NO.216

Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete. Bd.M.29 Page No.391 SSR OF 2022-23 ITEM NO.33.23 & PAGE NO.215

Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.42.30 & PAGE NO.277

Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO.42.34 & PAGE NO.277

Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.Bd.V.30 & Page No.565 SSR OF 2022-23 ITEM NO.41.63 & PAGE NO.272

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. B.d.V.43, Page No.574 SSR OF 2022-23 ITEM NO.42.12 & PAGE NO.275

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. Bd.V.32 A Page 551 and as directed by Engineer in Charge SSR OF 2022-23 ITEM NO.42.67 & PAGE NO.281

Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres As directed by engineer in charge. SSR OF 2022-23 ITEM NO.42.54 & PAGE NO.280

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.42.52 & PAGE NO.279

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V.5 PAGE 551 and as directed by Engieer in charge SSR OF 2022-23 ITEM NO.42.57 & PAGE NO.280

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. BD.V.5 PAGE 551 and directed by Engineer in charge SSR OF 2022-23 ITEM NO.42.55 & PAGE NO.280

Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. BD.V.4 Page No.554 SSR OF 2022-23 ITEM NO.41.40 & PAGE NO.270

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Bd.V9 & page No.555 SSR OF 2022-23 ITEM NO.41.47 & PAGE NO.270

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. As directed by Engineer in Charge SSR OF 2022-23 ITEM NO.42.31 & PAGEN NO.277

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.42.20 & PAGE NO.276

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. As directed by Engineer Charge SSR OF 2022-23 ITEM NO.35.21 & PAGE NO.225

Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. Bd.P.6 page no.414 & Pre-approval of Superintending Engineer SSR OF 2022-23 ITEM NO.36.13 & PAGE NO.228

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.As directed by Engineer in charge SSR OF 2022-23 ITEM NO.35.25 & PAGE NO.225

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.31.09 PAGE NO.206

Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO.40.07 & PAGE NO.264

Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. Height letter, figures including painting the lefters/figures with approved colour and shade complete Bd.W.7 page no.586 SSR OF 2022-23 ITEM NO.44.12 & PAGE NO.294

Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) Cd.15 page no.168 and B.7, page no.38 SSR OF 2022-23 ITEM NO.11.25 & PAGE NO.82

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.E.4 Page No.289 and B-7, Page no.38 SSR OF 2022-23 ITEM NO.24.08 & PAGE NO.176

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Bd.2 Page No.275 SSR OF 2022-23 ITEM NO.23.01 *& PAGE NO.713

Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). Bd.R.5 page no.453 SSR OF 2022-23 ITEM NO.38.05 & PAGE NO.233

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. As directed by Engineer in Charge SSR OF 2022-23 ITEM NO.46.15 & PAGE NO.296

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. As directed by Engieer in charge SSR OF 2022-23 ITEM NO.46.13 & PAGE NO.296

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO.46.09 & PAGE NO.296

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete As directed by Engieer in charge SSR OF 2022-23 ITEM NO.46.19 & PAGE NO.297

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.F.12 Page No.304 & B-7, Pg.38 SSR OF 2022-23 ITEM NO.26.23 & PAGE NO.185

For All Other Minerals

Water Obsorption Compressive Strenght Efflorescence (Set of 5 Bricks)

Water Absorption, Modulus of Rupture

Compressive Strength of C.C .Cube (Set of 3 cubes)

Add for Labour Insurance 1%

ADD FOR GST 18%

Executive's Table @ 1800Lx900Dx750HT Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing As directed by Engieer in Charge SSR OF 2022-23 ITEM NO.51.21 & PAGE NO.355

Executive Table @ 2250Lx2100Dx750HT including Low Height Credestal @ 1200Lx450Dx650HT Providing & Fixing of Table @ 2250Lx2100Dx750HT TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band. INCLUDING CREDESTAL @ 1200L X 450D X 650H :- To be made out of Membrane Finish ( 2 Openable Shutter & 3 Drawer Pedestal in between ) as per drawing. . As directed by Engineer in charge SSR OF 2022-23 ITEM NO.51.24 & PAGE NO.355

Low Height Openable Storage @ 900Lx450x750HT Providing and fixing Openable Steel Storage of 900 x 450 x 750Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk additional Top on top of storage as as per drawing As directed by Engineer in charge SSR OF 2022-23 ITEM NO.51.35 & PAGE NO.358

Medium Height Steel Storage @ 750Lx450Dx1200HT Providing and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk. as per drawing. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.51.36 & PAGE NO.358

Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.51.41 & PAGE NO.359

Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.51.44 & PAGE NO.359

Stool for Lab and Class-IV Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.51.51 & PAGE NO.365

Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.51.54 & PAGE NO.366

3 DRAWER PEDESTAL UNIT @ 392L x 450D x 680Ht. mm. 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.51.34 & PAGE NO.358

Book Case with Glass Shutter @ 825Lx300Dx1650HT Providing & Fixing of Book Case with Glass Shutter @ 825Lx300Dx1650HT:- To be made out of complete body & in 0.7mm thick CRCA & Shutter in 1.2mm thick CRCA with glass pannel in Powder coating finish as per drawing. As directed by Engineer in charge SSR OF 2022-23 ITEM NO.51.39 & PAGE NO.359

Add for Labour Insurance 0.5%

ADD FOR GST 18%

Providing and errectig and giving test of subrnerssible purnpset confittnlng to IS 8034 / 1976 and motor confirming to IS 9283 / 1979_ Pump shall be suitable for various delivery head with stainless steel impeller, shaft of bronze. Impeller shall be dynamically balanced and motor should be suitable for working at 380 / 440 volt phase 50 hz. AC supply. Cable guard, thrust carbon / fibre bearing to accept entire hydraulic thrust,waterproof winding shall be provided etc 1 2.00HP/8 STAGE

Providing errecting box type Panel board suitable for following HP pumpset. The panel board should be of size 1.25 x 1.0 x 0.65 mt. Made of M.S.sheet mounted on M.S. angle along with Starter, Mainswitch, Capaciter, Voltmeter, Ammeter, Single phase preventer etc. complete FOR 2 HP SINGLE PHASE SUB, PUMPSET

Supply and errecting H.D.P.E. pipe at position for section and delivery including plumbing with socke, checkout if required etc, complete. 32 MM HDPE PIPE

Supply errecting flat flexible 3-core PVC sheathed sub.type copper cable suitably clamped at fixed intervals with cable clips on drop pipe assembly etc. complete. 2.50 mm2

Providing and fixing following specials of ISI mark etc complete G I BEND 50 MM DIA

CABLE JOINT KIT

Providing and fixing in position unplasticized polyvinyl chloride (UPVC) ultra violet stabilized mm outer diameter plumbing pipe 2mm thick, confirming to IS 4985 including necessary fitting such as PVC bend, tee, reducer, clamps, plug etc. including necessary excavation, trench filling or necessary drilling holes in walls, slabs & making good etc. complete. UPVC pipe -25mm Dia

Providing and constructing Brick Masonry Inspection Chamber $60cm\times45cm\times90cm$ including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.

Drilling of borewell perfectly vertical 150 mm Dia. With a tolerance of 2 mm althroughout the depth in hardrock/ basalt/ granite/ deccantrap/gneiss/phylites/limestone & sedimentory rocks including overburden ramming for casing pipe inclusive of shifting, transportation of machine & equipments to site etc. complete.

Providing UPVC CASING PIPE of 180 mm inner dia. with minimum thickness of 5.70 mm to 6.50 mm i.e. about 165.40 mm outer Dia. recommended uptodate specifications as per IS 12818-1992 with sockets & insertion in the borewell through overburden including transportation, cutting, & groutation the same with cement slurry etc. complete.

Lowering laying PVC casing pipe 180 mm dia 6kg/sqcm

Providing and bore well cap 180 mm dia

Yield testing charges for successful Borewells etc. complete

ADD FOR GST 18%

Please Enable Macros to View BoQ information