COMPREHENSIVE MAINTENANCE OF INCINERATOR, MECHANICAL LAUNDARY, FORCED VENTILLATION, VOLTAGE STABILIZER AND CERTAIN MISCELLANEOUS WORKS AT HQGNA, INS GMK, INHS JEEVANTI,NOI AND 2W DET UNDER GE GOMANTAK

Amount

Maintenance ,Servicing and attending complaints in case of emergency or breakdown, rectification of fault of Mechanical laundry consisting of Front loading washing machine 35KG Capacity electrically operated Basket size 950x 500mm 1HP wash motor with 36RPM drain water inlet 25mm and drain outlet 75mm heating coil 12KW door opening size 500mm and overall dimension 1120x 1440x 1730mm, Hydro Extractor Capacity 15KG 3HP drive motor Basket size 550x 300mm Extract speed 1000RPM Drain 65mm and overall dimension 800x1050x1110mm, Drying Thumbler 30KG capacity Basket size 950x 950mm 1HP drive motor 1 HP blower motor electrical heating coil 18/24KW overall dimension 1060x 1570x 1980mm, Flat bed press head and buck size 1500x 750mm 1HP suction blower and 18KW electrical heating coil overall dimension 1600x 1570x 1280mm, Air Compressor of 2HP and all other connected work services, installed at INHS Jeevanti.

Supply and fixing in replacement of Microprocessor card for dryer/ washer complete all as specified and as directed.

Supply and fixing in replacement of Emergency switch /limit switch for dryer/ Washer complete all as specified and as directed.

Supply and fixing in replacement of transformer for dryer/ washer complete all as specified and as directed.

Supply and fixing in replacement of single phase preventer for dryer/ washer complete all as specified and as directed.

Supply and fixing in replacement of heater for dryer/washer complete all as specified and as directed.

Supply and fixing in replacement of main bearing block/sleeve for dryer/ washer complete all as specified and as directed.

Supply and fixing in replacement of contactor any type suitable for Washer/dryer complete all as specified and as directed.

Supply and fixing in replacement of belts for Washer /dryer complete all as specified and as directed.

Comprehensive maintenance and attending complaint in case of emergency or breakdown, Rectification of minor fault of Oil fired Incinerator of burning capacity 10kg/hr with all its accessories (Primary and Secondary Burner of 0.5 HP SP fully automatic mono block type, pressure jet with sequential controller, flame monitor, solenoid valves built in blower and motor fuel pump, voltage ignition transformer, ID Fan centrifugal type 3Phase 5 HP, Forced draft fan centrifugal type SP, 1HP, Recirculation pump 2 in Nos of 0.5 &0.4 HP, complete electrical control panel installed at INHS Jeevanti complete all as specified & directed by Engr-in charge. Note: Major worn out/ defective part will be provided and paid separately.

Material and labour for painting of complete oil fired incinerator installation comprising of Primary and secondary chamber , emergency vent, Ventury scrubber, Recirculation tank, chimney (stack) complete unit shall be painted externally with two coats of heat resistant silver coloured aluminium paint over a coat of primer. however, electrical panel and the fuel oil tank shall be painted with two coats of synthetic enamel paint over a coat of primer. Note:- Contractor should visit the site before quoting the rate.

Material and labour for re-winding of electrical motor with super enameled copper winding wire of required gauge by providing necessary insulating material, baking, varnishing etc complete all as manufacturing instruction and as directed by engineer-In-Charge. Note:- Rate quoted by contractor shall be included dismantling removing transporting re-fixing testing and commissioning all as directed by Engr-in-charge

Supply and fix ball bearing suitable for up to 7.5HP capacity motors/pumps after removal of old unserviceable bearing and making proper alignment and testing all as specified and directed by Engr-in-Charge

Material and labour for carrying comprehensive maintenance and technical services for 10 KVA UPS installed at Jeevanti Hospital ICU,Gomantak.(a) The service technician shall visit the UPS installation site for periodic preventive maintenance , checkup of the UPS system and the batteries every month. During this the system shall be cleaned and general performance will be checked.

Material and labour for carrying comprehensive maintenance and technical services for 10 KVA UPS installed at Jeevanti Hospital OT,Gomantak.(a) The service technician shall visit the UPS installation site for periodic preventive maintenance , checkup of the UPS system and the batteries every month. During this the system shall be cleaned and general performance will be checked.

Material and labour for carrying comprehensive maintenance and technical services for 10 KVA solar UPS installed at Comcen.(a) The service technician shall visit the UPS installation site for periodic preventive maintenance , checkup of the UPS system and the batteries every month. During this the system shall be cleaned and general performance will be checked.

Material and labour for carrying comprehensive maintenance and technical services for 10 KVA solar UPS installed at DSC mess at Gomantak.(a) The service technician shall visit the UPS installation site for periodic preventive maintenance , checkup of the UPS system and the batteries every month. During this the system shall be cleaned and general performance will be checked.

NOTE:- i).Above item No 14 to 20 are AMC should be contracted from respected OEM. ii). OEM will be attend the all the breakdown calls and rectify as and when required without any extra cost. iii). All type spare parts of UPS are covered under the scope of AMC except consumable item and UPS battery

Supply and fixing in replacement of IGBT card up to 10 KVA UPS suitable for existing make/model complete all as specified and directed .

Supply and fixing in replacement of control card / drive card/ AC to DC card/charger card for upto10 KVA UPS suitable for existing make/model complete all as all as specified and directed .

Supply and fixing in replacement of sealed maintenance free Battery 12V, 42 AH for UPS complete all as specified and directed .

Supply and fixing in replacement of sealed maintenance free Battery 12V, 17/18 AH for UPS complete all as specified and directed .

Supply and fixing in replacement of sealed maintenance free Battery 12V, 26 AH for UPS complete all as specified and directed .

Supply and fixing in replacement of sealed Tubular solatran Battery 12V, 150 AH(65GL150) for solar UPS complete all as all as specified and directed .

Supply and fixing in replacement of Cooling fan of UPS for capacity up to 20 KVA suitable for existing make/model complete all as all as specified and directed .

Supply and fixing in replacement of mother board of upto10 KVA UPS Normal /Solar type suitable for existing make/model complete all as all as specified and directed .

Supply and fixing in replacement of sealed maintenance free Battery 12V, 7 AH complete al as specified.

Supply and fixing in replacement of LED bulb 3 Watts Color WH/WW with base B22 screw /thread type all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of LED bulb 7/9 Watts Color WH/WW (B22 & E27) screw /thread type all as specified and directed by Engr-in-Charge.

S & F LED flood light luminaries 20 W multicolor including taking down of old defective fittings Complete all as specified and directed.

Material and labour for complete servicing of Solar Water Heater thermosyphonic type of capacity 1250 Ltrs including cleaning of main tank, Solar power module/ Solar Panel Reflectors including checking & repairing leakage of inlet/ outlet pipes of Solar Water Heater complete installed at INHS Jeevanti all as specified and directed.

Supply and fixing heating element 3 KW for the purpose of backup heater suitable for existing solar water heating system complete all as specified and directed .

Supply and fixing thermostat for heating element 3 KW for the purpose of backup heater suitable for existing solar water heating system complete all as all as specified and directed .

Material and labour for complete servicing of Solar water heater thermosyphonic type of capacity 100 LPD including cleaning of main tank, Solar power module/ Solar Panel Reflectors including checking & repairing leakage of inlet/ outlet pipes of Solar Water Heater complete installed at MNS Block,Gomantak all as specified and directed.

Material and labour for servicing and cleaning of exhaust and fresh air ducting/blower and SS hood chimney inside/outside system any size of forced ventilation system after dismantling nuts and bolts by using hot water, detergent and SS polish and fresh air blower fan and painting with synthetic enamel paint of existing colour by spraying, including filling cavities with filler including replacement of micro filter of 20/90 microns (as per existing filter) including refixing the same in original position with new nuts/bolts and washers at GNA (O) mess, ships galley ,DSC galley,NOI & 2 W det Ship Gallley complete all places take one job as specified and directed.

S & F Direct on line Starters 415V , up to 5 HP ,relay range 9-15 Amps 50 Hz,3 phase complete.

S & F MCCBs for motor protection for current rating 100 Amp,16 KA, 4 pole, 415V,AC.

S & F Electronic motor protection relay with earth fault protection for overload 240 V AC .

Supply and fixing Aluminium fresh Grills of size 300x150mm complete all as per existing at DSC ,Gomantak Galley.

Supply and fixing of fresh air filter of size 550x550mm complete all as per existing model complete all as specified and as directed

Supply & fixing of Aluminium fresh Grills of size 400x150mm existing model complete all as specified and as directed

Supply & fixing of Aluminium fresh Grills of size 300x200mm existing model complete all as specified and as directed

Supply, installation, balancing, testing and commissioning of site fabricated GI sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows , bends, slip on flanges, GI thread rod, vanes, in and including fixing and supports materials as per site requirement etc. of size 22 guage GI Sheet complete all as specified and as directed.

Material and labour for servicing and cleaning of voltage stabilizer 400/500 KVA inside area , greasing, checking of PCB, transformers, servo motors, dimmers, control panels and all accessories and control wiring, oil checking etc complete all as specified and directed by Engineer in Charge.

Material and labour for servicing and cleaning of Static (IGBT)/oil cooled voltage stabilizer up to 200 KVA inside area , greasing, checking of PCB, transformers, servo motors, dimmers, control panels and all accessories and control wiring, oil checking etc complete all as specified and directed by Engineer in Charge.

Supply and fixing in replacement of Servo Control panel suitable for up to 500 KVA suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and directed by Engineer in Charge.

Supply and fixing in replacement of Servo Circuit Card (PCB) suitable for up to 500 KVA complete all as specified and directed by Engineer in Charge.

Supply and fixing in replacement of Servo Control box suitable for up to 500 KVA suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and directed by Engineer in Charge.

Supply and fixing in replacement of Multifunctional Meter (Type 1) suitable for up to 500 KVA suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of Multifunctional Meter (Type 2) suitable for up to 500 KVA suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of PCB Holder suitable for up to 500 KVA suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of Voltmeter suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of Ammeter suitable for Static (IGBT)/oil cooled voltage stabilizer up to 500 KVA complete all as specified and as directed.

Supply and fixing in replacement of all type of button/ switch up to 500 KVA suitable for Static (IGBT)/oil cooled voltage stabilizer(Push button/Auto Manual Switch/Micro switch/ Potentiometer/Limit Switch/Lever Switch) complete all as specified and as directed.

Supply and fixing in replacement of Indicator Light(DPDT/SPDT/SPST type) suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of Servo Motor (3 kgs.) with RC suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of Servo Motor (10 kgs.) with RC suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of Servo Motor (20 kgs.) with RC suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of Carbon Brush suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of Dimemer-60 Amps suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of Dimmer-250 Amps suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of transformer up to 50 KVA suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of transformer for 200 KVA suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of transformer for 400 KVA suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Supply and fixing in replacement of transformer for 500 KVA suitable for Static (IGBT)/oil cooled voltage stabilizer complete all as specified and as directed.

Material and labour for attending of emergency break down complaint of voltage stabilizer up to 500 KVA of Static (IGBT)/oil cooled voltage Servo Stabilizer complete all as specified and as directed.

S & F LED flood light luminaries 3rd Generation 210W Pressure die cast housing , IP 66 rating making electrical connection to the fitting of high mast light with suitable size of wire including taking down of old defective fittings Complete all as specified and directed by Eng-in-charge.

Material and labour for replacement of burner rod assembly single phase 220 volts, Capacity 04-10KG/hr suitable for existing Incinerator installed at Jeevanti hospital complete all as specified and directed by Engr-in-Charge.

Material and labour for replacement of Ignition Transformer electronic type suitable for 01-04 lakh Kilo/Cal/hr burner rod assy all as specified and directed by Engr-in-Charge.

Material and labour for sequence controller suitable for 01-04 lakh Kilo/Cal/hr burner rod assy all as specified and directed by Engr-in-Charge.

Material and labour for ignition rod suitable for 1-4 lakh Kilo/Cal/hr burner rod assy all as specified and directed by Engr-in-Charge.

Material and Labour in replacement of sub main wiring (three phase) with single core 1100 V grade conforming to relevant IS, PVC insulated unsheathed cables four run of 10 Sq mm multi stranded copper conductor drawn through and including 32mm mm wide non metallic PVC capping casing including all accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 10 sqmm copper wire earth continuity conductor connecting to existing main switch board \ Distribution Board and testing on completion etc including taking down old submain wiring of any type with conduit/capping casing and making good disturbed surfaces to match existing all as specified and directed.

Material and labour for new transformer oil 15W 40 for topping up for in Servo Voltage stabilizer complete all as specified and as directed

Star Freeze Service (BID ID -3474318)

M/s Gayatri Contruction Co. (BID ID -3483917)