Repairing and maintenance work in the flat (Chandrakosh-1) at HRI, Prayagraj

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying Vitrified tiles in floor with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints. Size of Tile 600x600 mm (Make: Kajaria, Somany & Johnson)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of required size & colours as approved by Engineer-in-Charge over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (Make: Kajaria, Somany & Johnson)

Providing and laying rectified Glazed Ceramic floor tiles of required size (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622 of required size & colours as approved by Engineer-in-Charge laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. (Make: Kajaria, Somany & Johnson)

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all comp Fixed to openings /wooden frames with rawl plugs screws etc.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :5.5 mm thick glass panes

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of f ittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. (Make: As approved by Department)

Providing and fixing C.P. brass two way bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (Make: As approved by Department)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (Make: Cera, Hindware, Plumber)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (Make : J.K., Birla, Asian), coverage of putty around 1 kg/sqm.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre (Make : J.K., Birla, Asian)

Painting one or more coats to give an even shade by premium Acrylic Emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/litre of approved make and shade over old painted surfaces at all height, level location including preparing the surface, sand papering, filling up to crevices, scaffolding, roller application etc. all as per manufacturer’s recommendation, specifications and as directed by the Engineer-in-charge. Putty required for preparing surface will be provided under relevant items. (Make: Asian, Berger, Nerolac)

Painting one or more coats to give an even shade by synthetic enamel paint (as per surface requirement and direction of Engineer-in-Charge) of 1st quality and of approved make and shade/colour on old painted inside/outside surfaces on GI/CI water supply line, waste line, steel windows, wooden doors, cupboards, MS grill etc. including thorough surface preparation, thorough removal of rust, filling up of dents, cracks etc. at all height, level, location, including scaffolding etc. all complete as directed by the Engineer-in-Charge (Make: Asian, Berger, Nerolac)

15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand

Providing and fixing C.P. brass Health Faucet of approved quality conforming to IS:8931 : 15 mm nominal bore (Make: L&K, Jaquar, Plumber)

Supply & fixing of 304 grade glossy finish stainless steel sink of size (18" x 24" x9") in the existing space of kitchen for sink with some modification including required acessories all complete as per direction of Engineering-in-charge (Make: Hindware, Featural, Cera)

Providing and fixing/welding in position 125 mm long M.S. handle of approved quality

Providing and fixing/welding in position 100 mm long M.S. Tower bolt of approved quality