Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.2 LAccepted-Finance 53 13 A OUTER CIRCULAR ROAD KILPAUK GARDEN COLONY CHENNAI 600 010 | CHENNAI | CHENNAI | TAMIL NADU | 600010 | ₹35.2 L | L1 | Accepted-Finance Being L1 |
| 2 | L2₹36.1 L+₹93,655 (2.66%)Rejected-Finance NO 17 5 SOLOMON STREET ADHI NAGAR EAST TAMBARAM CHENNAI 600 059 | CHENNAI | TAMIL NADU | 600001 | ₹36.1 L+₹93,655 (2.66%) | L2 | Rejected-Finance Not being L1 |
| 3 | L3₹39.6 L+₹4.4 L (12.5%)Rejected-Finance | ₹39.6 L+₹4.4 L (12.5%) | L3 | Rejected-Finance Not being L1 |
| Sl No | Description | Qty | Unit | kcs builders L2 | M/s.Sai Agency L1 | R.NIMRODE L3 |
|---|---|---|---|---|---|---|
| 1.00 | M&L for preparing existing black top surfaces of road by brushing with wire brush for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly as a priming / tack coat with bitumen primer of paving bitumen of grade VG-30 at the rate of 5 kg per 10 Sqm over bituminous surface complete all as specified and as directed by Engineer-in-Charge. | 400 | X Sqm | 395 ₹1,58,000 | 300 ₹1,20,000 Lowest | 300 ₹1,20,000 Lowest |
| 2.00 | M&L for Bituminous premixed semi dense asphaltic concrete (SDAC) by using Hot mix plant, 40 mm consolidated thickness with 5.5% binder content in weight of total mix (Paving bitumen VG-30) and filler of cement content as per design mix (not less than 2%) spread by using mechanical paver, rolled and consolidated to required camber and gradient complete to a uniform surface by using Tandom Vibrator power roller 8 to 10 tonne capacity complete all as specified and directed by Engineer-in-Charge.
Note:
(a) Cement shall be used as filler at mininum 2% by weight of total mix in event of variation in design mix the percentage of filler content shall be on plus side adopted.
(b) SDAC shall be as per MORTH specification
(c) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (d) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only
(e) The job mix shall be designed from the Government Engineering Colleges ,Wing of CME Pune and Highways Research Station / IIT Chennai only, job mix formula shall be approved by GE before incorporation. | 401 | X Sqm | 4,950 ₹19,84,950 | 4,310 ₹17,28,310 Lowest | 5,600 ₹22,45,600 |
| 2.01(f) Cost of testing charges, materials and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be made on this account. (g) Contractor quoted rate shall be for 5.5% binder content .If the binder content shall be less than 5.5% by weight of total mix , price adjustment shall be made for less bitumen at the rate of Rs 55/kg .However no price adjustment if the binder content shall be more than as specified and no other claim whatsoever on this account shall be allowed and admissible. | ||||||
| 3.00 | M&L for preparing preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with air Compresor to remove all loose dirt etc. and applying evenly as a priming / tack coat with bitumen primer of paving bitumen of grade VG-30 at the rate of 10 kg per 10 Sqm complete all as specified and as directed . | 10 | X Sqm | 420 ₹4,200 | 350 ₹3,500 Lowest | 500 ₹5,000 |
| 4.00 | M&L for repairs to potholes any depth, not exceeding 1 Sqm each including sweeping ,free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. by cutting around edges to at least 25mm in depth, making good by filling in with screened and graded road metal, watering and well ramming (including supply of road metal) etc.complete all as specified and as directed by Engineer- in- charge | 2 | X Sqm | 2,250 ₹4,500 | 3,000 ₹6,000 | 1,500 ₹3,000 Lowest |
| 5.00 | M&L for premix bituminous macadam by using Hot mix plant ,75 mm consolidated thickness or less with 4.0 % binder content in weight of total mix by using paving bitumen VG-30 spread by using mechanical paver, rolled and consolidated to required camber and gradient complete to a uniform surface by using Tandom Vibrator power roller 8 to 12 tonne capacity complete all as specified and directed by Engineer-in-Charge | 6 | Cum | 10,800 ₹64,800 | 8,500 ₹51,000 Lowest | 10,500 ₹63,000 |
| 5.01Note : (a) Bituminous macadam shall be as per MORTH specification (b) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (c) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only (d) The mix shall be designed by job mix formula and approved by GE. (e) Cost of testing charges, materials and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be made on this account. | ||||||
| 5.02(f) Contractor quoted rate shall be for 4.0% binder content only .If the binder content shall be less than 4.0% by weight of total mix, price adjustment shall be made for less bitumen at the rate of Rs 55/kg .However no price adjustment if the binder content shall be more than 4.0% and no other claim whatsoever on this account shall be allowed and admissible | ||||||
| 6.00 | M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exceeding 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. | 2,000 | RM | 81 ₹1,62,000 | 71 ₹1,42,000 | 50 ₹1,00,000 Lowest |
| 7.00 | S&F in repairs yellow and black plastic speed bump of size 500mm x 380mm x 50 mm of 40 tonne load capacity made of ABS plate material, highly reflective reflector mould in PMMA, material welded with ABS plate through ultrasonic welding process with end cap including epoxy for fixing speed bumps on roads at different locations and places with necessary bolts / nuts etc.fixed all as per Manufacturer’s instructions and as directed by Engineer-in-Charge. Make : Dark Eye , GREENS / GREENLITE or equivalent of make as approved by CWE. | 36 | RM | 2,200 ₹79,200 Lowest | 2,750 ₹99,000 | 2,500 ₹90,000 |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
19 Aug 2026, 6:00 pmClosed
Col Animesh Srivastava, CWE Chennai
COMMANDER WORKS ENGINEERS CHENNAI PALLAVAN SALAI CHENNAI 600 002
REPAIRS TO ROADS, BERMS, AND ROAD SIDE FURNITURE AT ZONE A AND C AREA UNDER GE CHENNAI
2026_MES_770855_2
88511/E8
Open Tender
Civil Works - Roads
Item Rate
120 days
GE Chennai
All as per Tender document
8 documents required · 8 mandatory
₹500
GE Chennai
₹74,000
Yes
7 Sept 2026
29 Jul 2026
21 Aug 2026
29 Jul 2026
19 Aug 2026
5 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for preparing existing black top surfaces of road by brushing with wire brush for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly as a priming / tack coat with bitumen primer of paving bitumen of grade VG-30 at the rate of 5 kg per 10 Sqm over bituminous surface complete all as specified and as directed by Engineer-in-Charge. | 400 | X Sqm | 1 | ₹400 |
| 2 | M&L for Bituminous premixed semi dense asphaltic concrete (SDAC) by using Hot mix plant, 40 mm consolidated thickness with 5.5% binder content in weight of total mix (Paving bitumen VG-30) and filler of cement content as per design mix (not less than 2%) spread by using mechanical paver, rolled and consolidated to required camber and gradient complete to a uniform surface by using Tandom Vibrator power roller 8 to 10 tonne capacity complete all as specified and directed by Engineer-in-Charge.
Note:
(a) Cement shall be used as filler at mininum 2% by weight of total mix in event of variation in design mix the percentage of filler content shall be on plus side adopted.
(b) SDAC shall be as per MORTH specification
(c) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (d) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only
(e) The job mix shall be designed from the Government Engineering Colleges ,Wing of CME Pune and Highways Research Station / IIT Chennai only, job mix formula shall be approved by GE before incorporation. | 401 | X Sqm | 1 | ₹401 |
| 2.01 | (f) Cost of testing charges, materials and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be made on this account.
(g) Contractor quoted rate shall be for 5.5% binder content .If the binder content shall be less than 5.5% by weight of total mix , price adjustment shall be made for less bitumen at the rate of Rs 55/kg .However no price adjustment if the binder content shall be more than as specified and no other claim whatsoever on this account shall be allowed and admissible. | - | - | - | - |
| 3 | M&L for preparing preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with air Compresor to remove all loose dirt etc. and applying evenly as a priming / tack coat with bitumen primer of paving bitumen of grade VG-30 at the rate of 10 kg per 10 Sqm complete all as specified and as directed . | 10 | X Sqm | 1 | ₹10 |
| 4 | M&L for repairs to potholes any depth, not exceeding 1 Sqm each including sweeping ,free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. by cutting around edges to at least 25mm in depth, making good by filling in with screened and graded road metal, watering and well ramming (including supply of road metal) etc.complete all as specified and as directed by Engineer- in- charge | 2 | X Sqm | 1 | ₹2 |
| 5 | M&L for premix bituminous macadam by using Hot mix plant ,75 mm consolidated thickness or less with 4.0 % binder content in weight of total mix by using paving bitumen VG-30 spread by using mechanical paver, rolled and consolidated to required camber and gradient complete to a uniform surface by using Tandom Vibrator power roller 8 to 12 tonne capacity complete all as specified and directed by Engineer-in-Charge | 6 | Cum | 1 | ₹6 |
| 5.02 | (f) Contractor quoted rate shall be for 4.0% binder content only .If the binder content shall be less than 4.0% by weight of total mix, price adjustment shall be made for less bitumen at the rate of Rs 55/kg .However no price adjustment if the binder content shall be more than 4.0% and no other claim whatsoever on this account shall be allowed and admissible | - | - | - | - |
| 6 | M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exceeding 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. | 2,000 | RM | 1 | ₹2,000 |
| 7 | S&F in repairs yellow and black plastic speed bump of size 500mm x 380mm x 50 mm of 40 tonne load capacity made of ABS plate material, highly reflective reflector mould in PMMA, material welded with ABS plate through ultrasonic welding process with end cap including epoxy for fixing speed bumps on roads at different locations and places with necessary bolts / nuts etc.fixed all as per Manufacturer’s instructions and as directed by Engineer-in-Charge. Make : Dark Eye , GREENS / GREENLITE or equivalent of make as approved by CWE. | 36 | RM | 1 | ₹36 |
| 8 | S&F in repairs convex mirror made up of PC materials having clear and definite mirror image, 130 degree of viewing angle of size 800mm dia, mounted on MS pipe 50mm dia, 1.5m long duly powder coated including embedding the pipe in PCC 1:3:6 type C1 using 20mm graded stone aggregate of size 150mm x 150mm x 300mm with necessary earth work excavation etc. complete all as specified and directed.
Make: 3M/Darkeye or other equivalent approved by CWE | 9 | Each | 1 | ₹9 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.59 MB
TENDER88511.pdf
Tender Documents • 1.10 MB
BOQ_875441.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .