GE/ALP (8220B) KOLKATA OF 2023-24

Amount

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc. of any descriptions complete all as specified and as directed.

Material and Labour for brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per Item No. 02 above but except brick etc complete all as pecified and directed.

Material and Labour for brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc complete all as specified and directed.

Material and Labour for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick walls or concrete surface, finishing even and smooth (without using extra cement)etc including necessary working platform complete all as specified and directed.

Materials and labour for 15 mm thick rendering on fair faces of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Material and labour for 10mm thick rendering in cement mortar (1:3) on concrete surface as in ceiling and finished the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling of floor hearth or wall filing including cement mortar bedding (but not backing) and removing debris and rubbish off the premises.

M&L for double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting/dado etc. set and jointed in neat cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick plaster in CM (1:4) for backing coat complete all as specified and directed .

M&L for double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neat cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick cement plaster in CM (1:4) for backing coat complete all as specified and directed .

M & L for double charge vitrified ceramic tiles light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as flooring with border of dark shed, over and including 15mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to match etc complete all as specified and directed.

M & L for double charge Vitrified Ceramic tiles in skirting light shade 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm , in skirting and dado over and including backing coat in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match in white or coloured cement to match etc complete all as specified and directed.

Material and labour for non-skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.

Material and labour for non-skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15 mm thick cement plaster for backing coat in CM (1:6) complete all as specified and directed.

Material and labour for non - skid Ceramic coloured floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 10 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons paved laid dry or laid dry and pointed etc complete all as specified and directed.

Material and Labour for 20mm thick pre-polished cement concrete designed coloured pavement/Chequered tiles having area of each tile not exec - 0.16 Sqm in size glossy finish as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Material and labour for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations

Demolition of cement concrete (reinforced) in ground floor and paving not exceeding 15 cm thick (below or above G.L) complete all as specified and directed

M&L for RCC 1:2:4 (Nominal Mix) in type-B1 using (20mm graded stone aggregate) pre cast slabs supported on walls for cup board, counter basin and Kitchen slabs,manhole cover etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any descriptions, below or above ground floors (floor topping, sub base etc) not exc 150mm thick, above or below ground level complete all as specified and directed.

Material and Labour for PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed.

Material and Labour for 100mm thick plain Cement concrete type B- 2, (using 40mm graded stone aggregate) as in floor, hard standing and like complete all as speficied and directed.

Material and Labour for 75mm thick PCC (1:3:6), type C2, (using 40mm graded stone aggregate) as in plinth protection / paving, surfae finished even & smooth without using extra cement as complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

M&L for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coated main runner of dimension 39 mm x 24mm x 0.80mm thick ( thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thickness comprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid ( placed in the grid system duly suspended with 4 mm dia G I bars hangers fixed with steel dash through fasteners from purlins of the roof with necessary fittings and fixtures etc complete all as specified and directed.

M&L for 10 mm thick Gypsum board false ceiling joint less work including application of putty over gypsum board to achieve smooth and joint less celing surface and applying two coat of oil bound distemper in ceiling surfaces including framed work for consisting of 60 mm wide GI steel 'C' section of as in main of 0.71mm thick and 60 mm GI channel section as in cross member of 0.63 mm thick and GI steel angle section as in suspenders of size 25x20x0.63 mm and wire cloth of 0.71 mm dia of wire and 100x50mm aperature size including cutting , riveting, steel fastener, drilling holes in RCC roof and securing with screws etc complete all as specified and directed by Engineer-in-Charge.

M&L for POP cornice width n.exc 200mm wide in ceiling edge of any design and shape ,complete all as specified and directed.

S&F in repair 6 mm thick gypsum board/calcium silicate board tiles of size 600x600 mm including proper hanging arangement as required complete all as specified and directed.

S&F in repair Solid PVC Wall lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC fillets of width 35mm including necessary caping/fillets at top and junctions required as per site etc complete all as per specified and directed.

S&F in repair PVC caping/fillets at top and junctions required as per site condition PVC panelling etc complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and removing from site complete all as specified and directed.

All as per item No. 37 above here in before but exc 1.5 sqm and not exc 4 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

All as per item No. 39 above here in before but exc 2 Sqm each.

Taking down of shutter and refixing of shutters of any discription in the same opening after easing and adjusting n exc 1 sqm each, all as specified and directed.

Taking down of shutter and refixing of shutters of any discription in the same opening after easing and adjusting area exc 1 Sqm but n exc 2 sqm each, all as specified and directed.

Supply & fix for 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred put together with glue, pinned at joints complete all as specified and directed.

Supply and fixing for mild steel flat iron of size 25x3 mm or equivalent as required for hold fasts and clamps & similar small articles confirming to Fe-410-O or Fe-310-O (upto 12 storied bldg) complete all as specified and directed.

Supply & fix for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze ect (wihout sash bars), edge of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc sizes of memebers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

S&F for Solid PVC moulded door frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S&F for Factory made solid panel PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face complete all as specified and directed.

Supply and fixing for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match,reinforced with MS Sq tube in opening all as shown on drawing (upto 12 storied bldg) complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

Supply and fixing for 75mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and directed.

S&F for Stainless steel butt hinges medium weight 100mm long etc complete all as specified and directed.

S&F for 125mm long aluminium anodised extruded handles fabricated type, all as specified and directed.

S&F for aluminum anodised barrel tower bolt of extruded section 150 mm size.

S&F for Aluminium anodized barrel tower bolts, extruded section 200mm long.

S&F for aluminium sliding door bolt 300mm long, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate.

Supply & fixing for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples complete all as specified and direcrted.

Supply & fixing in repair for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and direcrted.

Hacking out old broken glass of any thickness, sizes quality on description from metal frames includng punching or drilling out old glazing pins/spring clips.

Supply and fix for 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as specified and direcrted.

Supply & fix for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc. 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix for 4mm thick frosted glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as specified and direcrted.

S&F for power coated aluminium door shutter fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete including aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80 mm x 38mm x 2.00 mm taking down old door with necessary all fitting and all necessary fittinngs complete all as specified and directed.

S&F for Powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm including (two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed by the Engr-in-Charge.

S&F in repair power coated aluminium Partition wall of frame size 80mm x 38mm x 2.00 mm with standard beads/glazing clips, locking arrangement etc with necessary all fittings complete all as per manufacturer's instructions and all as specified and directed.

S&F for 4.8mm thick plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane.

M&L for 9mm thick prelaminated partilce boards interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame for pelmet boxes,aluminium door and aluminium partitions complete all as specified and directed.

Supply and fixing as in repair drapery rod made of electric resistance welded MS pipe of 21 mm dia having a coating of corrugated virgin PVC extrusion and cover with ABS plastic incuding brackets and knobs etc complete all as specified and directed.

Supply & fix as in repair for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per item No 69 here-in-before but without glazing bars.

Dismantling wrought iron or mild steel work of any description as in door, gates etc and similar works complete all directed.

Supply & fix for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riv-eted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 390 Gde E-165 complete all as specified and directed.

Taking down 15 mm dia old steel water tubing and connections in any position complete .

Taking down 20 mm dia old steel water tubing and connections in any position complete .

Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Cutting grooves/chases in cement concrete or brick wall / floor for taking down of GI pipe line and making good the disturbed surfaces to match with existing specification complete all as specified and directed.

Supply and fixing in repair vitreous China (white) wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts including PVC seat cover and making all necessary connections complete all as specified and directed.

S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest including P or S trap complete including cement concrete (excluding flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and directed.

S&F in repairs Vitreous China wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.

S&F in repairs Vitreous China wash basin (coloured), Pedestral pattern, (bowl) size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.

S&F in repairs vitreous China wash basin (coloured), oval size for counter top, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.

S&F in repair 15mm bore Brass CP bibcock fancy type long body with crutch or butterfly handle complete all as specified and directed.

S&F in repair 15mm bore Brass CP stopcock concealed type fancy type,with crutch or butterfly handle complete all as specified and directed.

S&F in repair 15mm bore Brass CP angular stopcock type with crutch or butterfly handle complete all as specified and directed .

S&F in repair PVC connection 15 mm size pipe with PTMT nut of length 600mm complete all as specified and directed.

S&F in repair brass CP shower roses with or without swivel joints,with shower arm, 125mm size, including fixing to steel pipes or union complete all as specified and directed.

S&F in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete with brass chromium plated screw complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed Make Prayag or equivalent approved by GE.

S&F in repair brass CP toilet paper holder to wall with chromium plated brass screws complete all as specified and directed.

S&F in repair brass CP health fucet with chromium plated brass screws etc complete all as specified and as directed.

M&L for preparation of newly plaster surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces and applying multi colour texture with plastic paint to match existing design and pattern as approved by GE (upto 12 storied of bldg) complete all as specified and directed.

M&L for one coat of plastic paint over old texture sruface to match existing design and pattern as approved by GE (upto 12 storied of bldg) complete all as specified and directed.

M&L for preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old distempered and painted surface and applying one coat of oil bound distemper etc all as specificed and directed.

M&L for preparation of newly plaster surfaces of ceiling surface and applying three coats white wash on walls complete all as specified and directed.

M&L for preparation of old surfaces of ceiling and applying one coats of white wash on ceiling surfaces complete all as specified and directed.

M&L preparation of newly plaster surfaces of wall and applying two coats exterior acrylic emulsion paint over a coat of primer on external surface including nescessary scafolding complete all as specified and directed.

Material & labour for preparation on new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer (upto ten storey bldg) complete all as specified and directed

M&L for preparation of old surfaces of wall and applying one coat exterior acrylic emulsion paint on external surface including nescessary scafolding complete all as specified and directed.

S & F for 2mm thick wall care putty on wall/ceiling complete all as specified and directed.

M&L for preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old painted surface and applying one coat of cement base paint etc all as specificed and directed.

M & L for two coats of synthetic enamel painting to wooden surfaces (frame & shutter) over a coat of primer including preparation of wooden surface of any description, not otherwise descri-bed, over 10cm width or girth

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for two coats of synthetic enamel painting to steel surfaces (frame & shutter) over a coat of red oxide primer including preparation of steel surface of any description, not otherwise descri-bed, over 10cm width or girth

M&L for Preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint etc all as specified and directed.

M&L for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two coats all as specified and directed.

Chipping of unsound/weak concrete materials from slabs , lintel,chajja, fin, facia etc. by any means as directed by engr-in-charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting including foreign matrials , loose concrete/aggregate etc and disposal of all debris out of MOD land (upto ten storey bldg) for 25mm average thickness. complete all as specified and directed.

M&L for Removing of concrete all around reinforcement including from behind the reinforcing bars to give an avrage 25 mm (but not less than 15 mm clear air gap) by manual methods (using wire brushing, chiselling etc) and applying alkaline rust removing chemical followed by removing rust by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surface (upto ten storey bldg) complete all as specified and directed upto 12 mm dia bar (Make: SIKA/FOSROC).

Supply and application of coat of Epoxy Zinc rich primer on the prepared steel surface excluding behind the bar by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 (upto ten storie bldg) complete all as specified and directed by Engr-in-charge. Make: SIKA/FOSROC.

M&L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed (upto ten storey bldg).

M&L for introducing new reinforcement bars of any dia of steel as per site requirement for structural connections in RCC Beam, lintels, columns and slabs including power drilling holes of appropriate diameter in reinforced of plain cement concrete to a minimum depth of 150 mm and upto 200 mm including power drilling , fixed the reinforcement in position using epoxy of loose dust by blowing air, sealing with epoxy cartridges etc (upto ten storey bldg) all as specified and directed.

Supply, mixing and application of two component structural grade polymer modified reinstatement morter, where local spalling has taken place or shuttering is not possible . The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as specified and directed by the Engr-in-charge upto 25 mm average thickness (upto ten storey High). Make :- Sika/Fosroc NOTE:- Cement and sand morter in proportion of 1:2 graded coarse sand ) with polymer admixed in proportions approved by Engr-in-charge)

M&L for applying curring compound or equivalent, complete all as specified and directed. over concrete surface as curing compound as per manufactures instructions, (upto ten storey building) complete all as specified and directed.

Supplying and fixing in repair 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

Oiling/greasing existing rolling shutters for easing adjusting for smooth functioning of steel rolling shutter complete all as specified and directed.

S&F for lock plate bracket made of angle 40X40X5 mm, flat 25X6 mm, cleat, latice flat & locking arrangement etc of rolling shuttes including necessary welding / riveting and one coat of red oxide primer including taking down old lock plate complete all as specified and directed.

S&F for mild steel slot profiles of 1mm thick including taking down old profiles complete all as specified and directed.

J B NATH AND SON

KAY BEE ASSOCIATES

S.S.ENTERPRISE

Rounaq Enterprise

DILIP CONSTRUCTION

Tirupati Buildcon Pvt. Ltd.